Black And Decker 24543 Bedienungsanleitung

Black And Decker Schleifmaschine 24543

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker 24543 (13 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/13

Form No. 90565294 June 2010 Printed in China

Instruction Manual

WARNING:

Before using this product,

read this manual and follow

all its Safety Rules and

Operating Instructions.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

www.craftsman.com

• Safety

• Operation

• Maintenance

• Parts List

• Español

4-1/2 inch

ANGLE GRINDER

Model 900.24543

90565294 EVOLV GRINDER.qxd:1006292-00 11651 grinder 6/8/10 7:49 AM Page 1

Read all safety warnings and

instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions

for future reference.

The term “power tool” in the warnings

refers to your mains-operated (corded)

power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away

while operating a power tool.

Distractions can cause you to lose

control.

2) Electrical safety

a) Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power

tools. Unmodified plugs and matching

outlets will reduce risk of electric shock

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged or

entangled cords increase the risk of

electric shock.

2 3

e)When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a

ground fault circuit interrupter

(GFCI) protected supply. Use of a

GFCI reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool. Do

not use a power tool while you are

tired or under the influence of

drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious

personal injury.

b) Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard

hat, or hearing protection used for

appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery pack,

picking up or carrying the tool.

Carrying power tools with your finger

on the switch or energizing power

tools that have the switch on invites

accidents.

d) Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left

attached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts. Loose clothes,

jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of dust collection can reduce

dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be

controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the

power source and/or the battery

pack from the power tool before

making any adjustments, changing

accessories, or storing power

tools. Such preventive safety

measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to

operate the power tool. Power tools

are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power toolʼs operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

f) Keep tools sharp and clean.

Properly maintained tools with sharp

edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories

and tool bits etc., in accordance

with these instructions, taking into

account the working conditions

and the work to be performed. Use

of the power tool for operations

different from those intended could

result in a hazardous situation.

5) Service

a) Have your power tool serviced by a

qualified repair person using only

identical replacement parts. This will

ensure that the safety of the power

tool is maintained.

SAFETY INSTRUCTIONS FOR

ALL OPERATIONS

Safety Warnings Common for Grinding,

Sanding, Wire Brushing

a) This power tool is intended to

function as a grinder, wire brush,

sander. Read all safety warnings,

instructions, illustrations and

specifications provided with this

power tool. Failure to follow all

instructions listed below may result in

electric shock, fire and/or serious

injury. Operations such as polishing

CRAFTSMAN EVOLV ONE YEAR LIMITED WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any

defects in material or workmanship. With proof of purchase, defective product will be

replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web site:

www.craftsman.com

This warranty does not cover the grinding wheel, which is an expendable part that can

wear out from normal use within the warranty period.

This warranty is void if this product is ever used while providing commercial services or

if rented to another person.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

SEARS WARRANTY

GENERAL POWER TOOL SAFETY WARNINGS

ANGLE GRINDER DIAGRAM

Spindle Lock Button (3)

Accessory Wheel (4)

Wheel

Guard (6)

Lock-On Button (2)

On-Off Switch (1)

Auxiliary Handle (5)

90565294 EVOLV GRINDER.qxd:1006292-00 11651 grinder 6/8/10 7:49 AM Page 2

filtrating particles generated by your

operation. Prolonged exposure to

high intensity noise may cause

hearing loss.

h) Keep bystanders a safe distance

away from work area. Anyone

entering the work area must wear

personal protective equipment.

Fragments of workpiece or of a

broken accessory may fly away and

cause injury beyond immediate area

of operation.

i) Hold power tool by insulated

gripping surfaces only, when

performing an operation where the

accessory may contact hidden

wiring or its own cord. Accessory

contacting a “live” wire may make

exposed metal parts of the power

tool “live” and shock the operator.

j) Position the cord clear of the

spinning accessory. If you lose

control, the cord may be cut or

snagged and your hand or arm may

be pulled into the spinning accessory.

k) Never lay the power tool down

until the accessory has come to a

complete stop. The spinning

accessory may grab the surface and

pull the power tool out of your control.

l) Do not run the power tool while

carrying it at your side. Accidental

contact with the spinning accessory

could snag your clothing, pulling the

accessory into your body.

m)Regularly clean the power toolʼs

air vents. The motorʼs fan will draw

the dust inside the housing and

excessive accumulation of powdered

metal may cause electrical hazards.

n) Do not operate the power tool near

flammable materials. Sparks could

ignite these materials.

o) Do not use accessories that

require liquid coolants. Using water

or other liquid coolants may result in

electrocution or shock.

p) Do not use Type 11 (flaring cup)

wheels on this tool. Using inappropriate

accessories can result in injury.

q) Always use side handle. Tighten

the handle securely. The side

handle should always be used to

maintain control of the tool at all times.

R) Use clamps or another practical

way to secure and support the

work piece to a stable platform.

Holding the work by hand or against

your body leaves it unstable and may

lead to loss of control.

or cutting-off are not recommended

to be performed with this power

tool. Operations for which the power

tool was not designed may create a

hazard and cause personal injury.

b) Do not use accessories which are

not specifically designed and

recommended by the tool

manufacturer. Just because the

accessory can be attached to your

power tool, it does not assure safe

operation.

c) The rated speed of the accessory

must be at least equal to the

maximum speed marked on the

power tool. Accessories running

faster than their rated speed can

break and fly apart.

d) The outside diameter and the

thickness of your accessory must

be within the capacity rating of

your power tool. Incorrectly sized

accessories cannot be adequately

guarded or controlled.

e) The arbor size of wheels, flanges,

backing pads or any other

accessory must properly fit the

spindle of the power tool.

Accessories with arbor holes that do

not match the mounting hardware of

the power tool will run out of balance,

vibrate excessively and may cause

loss of control.

f) Do not use a damaged accessory.

Before each use inspect the

accessory such as abrasive wheel

for chips and cracks, backing pad

for cracks, tear or excess wear,

wire brush for loose or cracked

wires. If power tool or accessory

is dropped, inspect for damage or

install an undamaged accessory.

After inspecting and installing an

accessory, position yourself and

bystanders away from the plane of

the rotating accessory and run the

power tool at maximum no-load

speed for one minute. Damaged

accessories will normally break apart

during this test time.

g) Wear personal protective

equipment. Depending on

application, use face shield, safety

goggles or safety glasses. As

appropriate, wear dust mask,

hearing protectors, gloves and

work shop apron capable of

stopping small abrasive or

workpiece fragments. The eye

protection must be capable of

stopping flying debris generated by

various operations. The dust mask or

respirator must be capable of

Further safety instructions for all

operations

Kickback and Related Warnings

Kickback is a sudden reaction to a

pinched or snagged rotating wheel,

backing pad, brush or any other

accessory. Pinching or snagging

causes rapid stalling of the rotating

accessory which in turn causes the

uncontrolled power tool to be forced

in the direction opposite of the

accessoryʼs rotation at the point of the

binding.

For example, if an abrasive wheel is

snagged or pinched by the workpiece,

the edge of the wheel that is entering

into the pinch point can dig into the

surface of the material causing the

wheel to climb out or kick out. The

wheel may either jump toward or

away from the operator, depending

on direction of the wheelʼs movement

at the point of pinching. Abrasive

wheels may also break under these

conditions.

Kickback is the result of tool misuse

and/or incorrect operating procedures

or conditions and can be avoided by

taking proper precautions as given

below:

a) Maintain a firm grip on the power

tool and position your body and

arm to allow you to resist kickback

forces. Always use auxiliary

handle, if provided, for maximum

control over kickback or torque

reaction during start up. The

operator can control torque reaction

or kickback forces, if proper

precautions are taken.

b) Never place your hand near the

rotating accessory. Accessory may

kickback over your hand.

c) Do not position your body in the

area where power tool will move if

kickback occurs. Kickback will

propel the tool in direction opposite to

the wheelʼs movement at the point of

snagging.

d) Use special care when working

corners, sharp edges etc. Avoid

bouncing and snagging the

accessory. Corners, sharp edges or

bouncing have a tendency to snag

the rotating accessory and cause loss

of control or kickback.

e) Do not attach a saw chain

woodcarving blade or toothed saw

blade. Such blades create frequent

kickback and loss of control.

Safety Warnings Specific for Grinding

Operations

a) Use only wheel types that are

recommended for your power tool

and the specific guard designed

for the selected wheel. Wheels for

which the power tool was not

designed cannot be adequately

guarded and are unsafe.

b) The guard must be securely

attached to the power tool and

positioned for maximum safety, so

the least amount of wheel is

exposed towards the operator. The

guard helps to protect operator from

broken wheel fragments and

accidental contact with wheel.

c) Wheels must be used only for

recommended applications. For

example: do not grind with the side

of wheel. Abrasive wheels are

intended for peripheral grinding, side

forces applied to these wheels may

cause them to shatter.

d) Always use undamaged wheel

flanges that are of correct size and

shape for your selected wheel.

Proper wheel flanges support the

wheel thus reducing the possibility of

wheel breakage. Flanges for cut-off

wheels may be different from grinding

wheel flanges.

e) Do not use worn down wheels from

larger power tools. Wheel intended

for larger power tool is not suitable for

the higher speed of a smaller tool and

may burst.

Safety Warnings Specific for Sanding

Operations

a) Do not use excessively oversized

sanding disc paper. Follow

manufacturers recommendations,

when selecting sanding paper.

Larger sanding paper extending

beyond the sanding pad presents a

laceration hazard and may cause

snagging, tearing of the disc or kickback.

Safety Warnings Specific for Wire

Brushing Operations

a) Be aware that wire bristles are

thrown by the brush even during

ordinary operation. Do not

overstress the wires by applying

excessive load to the brush. The

wire bristles can easily penetrate light

clothing and/or skin.

b) If the use of a guard is recommended

for wire brushing, do not allow any

interference of the wire wheel or

brush with the guard. Wire wheel or

brush may expand in diameter due to

work and centrifugal forces.

90565294 EVOLV GRINDER.qxd:1006292-00 11651 grinder 6/8/10 7:49 AM Page 4

Produktspezifikationen

Marke:	Black And Decker
Kategorie:	Schleifmaschine
Modell:	24543

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker 24543 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Schleifmaschine Black And Decker

Black And Decker KG2300 Bedienungsanleitung

29 September 2024

Black And Decker KG65 Bedienungsanleitung

23 September 2024

Black And Decker REVCMS12C Bedienungsanleitung

6 September 2024

Black And Decker CMEBL700 Bedienungsanleitung

4 September 2024

Black And Decker 2750-220 Bedienungsanleitung

1 September 2024

Black And Decker CD455 Bedienungsanleitung

31 August 2024

Black And Decker 24543 Bedienungsanleitung

9 August 2024

Black And Decker TV810 Bedienungsanleitung

6 August 2024

Black And Decker KG2023 Bedienungsanleitung

6 August 2024

Black And Decker BEG110 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-

Makita GA9060R Bedienungsanleitung

15 Oktober 2024

Hitachi G 13SR Bedienungsanleitung

14 Oktober 2024

Makita DGA700Z Bedienungsanleitung

13 Oktober 2024

Metabo WP820-115 Bedienungsanleitung

8 Oktober 2024

DeWalt DW887N Bedienungsanleitung

7 Oktober 2024

Milwaukee 0725-21 Bedienungsanleitung

5 Oktober 2024

Makita GA013GD101 Bedienungsanleitung

3 Oktober 2024

Milwaukee 2784-20 Bedienungsanleitung

3 Oktober 2024

Ryobi RAG800-115 Bedienungsanleitung

2 Oktober 2024

Makita GA022GD202 Bedienungsanleitung

2 Oktober 2024