Black And Decker ASI400B Bedienungsanleitung

Black And Decker niet gecategoriseerd ASI400B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker ASI400B (36 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/36
INSTRUCTION MANUAL
Catalog Number
ASI500
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you can’t find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
for instant answers 24 hours a day.
CORDLESS / 12VDC AIR STATION
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
90564808 AS1500.qxd:??????-00 BDL500 laser 5/18/10 9:56 AM Page 1
WARNING! Read all instructions before operating product. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNINGS:
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water. Keep the case dry at all times.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manuafacturerʼs
instructions.
8.) Do not place near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.) Protect the cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug unit when lightning is in the area or when unit is not in use.
13.) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
14.) Do not expose to dripping or splashing. WARNING: To reduce the risk of fire or
electric shock, do not expose this apparatus to rain or moisture.
15.) Do not operate near flammable materials, fumes or gases.
16.) Do not disassemble product. Incorrect reassembly may result in a risk of electric
shock or fire.
17.) Provide adequate ventilation and refrain from placing items on or around the product
during operation.
18.) Do not incinerate the battery even if it is severely damaged or is completely worn
out. The battery can explode in a fire. Check with local codes for possible special
disposal instructions.
19.) If any leakage of liquid from the battery cells occurs, discontinue use immediately
and return the battery to your local Black & Decker Service Center or authorized
service facility.
20.) Never attempt to open the battery for any reason. If the plastic housing of the
battery breaks or cracks, immediately discontinue use and do not recharge.
21.) Keep this product out of the reach of children.
22.) Since the vibration produced by the inflator may cause it to “walk”, do not operate on
a high shelf or other surface. Operate at ground or bench level only.
GENERAL SAFETY RULES
•KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
•CONSIDER WORK AREA ENVIRONMENT. Donʼt expose power tools to rain. Donʼt use
power tools in damp or wet locations. Keep work area well lit. Do not use tool in presence
of flammable liquids or gases.
•GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces.
For example; pipes, radiators, ranges, and refrigerator enclosures.
•KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord. All visitors
should be kept away from work area.
•STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-
up place — out of reach of children.
•DONʼT FORCE TOOL. It will do the job better and safer at the rate for which it was intended.
•USE RIGHT TOOL. Donʼt force small tool or attachment to do the job of a heavy-duty
tool. Donʼt use tool for purpose not intended.
2
90564808 AS1500.qxd:??????-00 BDL500 laser 5/18/10 9:56 AM Page 2
3
•DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in
moving parts. Rubber gloves and non-skid footwear are recommended when working
outdoors. Wear protective hair covering to contain long hair.
•USE SAFETY GLASSES. Also use face or dust mask if operation is dusty.
•DONʼT ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
•SECURE WORK. Use clamps or a vise to hold work. Itʼs safer than using your hand and it
frees both hands to operate tool.
•DONʼT OVERREACH. Keep proper footing and balance at all times.
•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool
cords periodically and if damaged, have repaired by authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
•DISCONNECT OR LOCK OFF TOOLS when not in use, before servicing, and when
changing accessories, such as blades, bits, cutters.
•REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that
keys and adjusting wrenches are removed from tool before turning it on.
•AVOID UNINTENTIONAL STARTING. Donʼt carry tool with finger on switch. Be sure
switch is off when plugging in.
•EXTENSION CORDS. Make sure your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. The following table shows the correct size to use depending on cord length
and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord.
•OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension
cords intended for use outdoors and so marked.
•STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when
you are tired.
•CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by authorized service center. Do not use tool if switch
does not turn it on and off.
•DO NOT OPERATE portable electric tools near flammable liquids or in gaseous or
explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite
fumes.
ADDITIONAL SAFETY WARNINGS FOR YOUR INFLATOR
WARNING! FOR HOME AND CAR USE ONLY:
• Inflate car and bike tires, balls, rafts, swimming pool floats, air mattresses, and more
in and around the home.
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More Not more American Wire Gauge
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
90564808 AS1500.qxd:??????-00 BDL500 laser 5/18/10 9:56 AM Page 3

Produktspezifikationen

Marke: Black And Decker
Kategorie: niet gecategoriseerd
Modell: ASI400B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker ASI400B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Black And Decker

Black And Decker

Black And Decker HV9000P Bedienungsanleitung

16 September 2024
Black And Decker

Black And Decker BDH2400HV Bedienungsanleitung

15 September 2024
Black And Decker

Black And Decker SC100 Bedienungsanleitung

13 September 2024
Black And Decker

Black And Decker RC3303 Bedienungsanleitung

8 September 2024
Black And Decker

Black And Decker AV1600B Bedienungsanleitung

8 September 2024
Black And Decker

Black And Decker BDC33L Bedienungsanleitung

6 September 2024
Black And Decker

Black And Decker ASI400B Bedienungsanleitung

4 September 2024
Black And Decker

Black And Decker BEBLV230 Bedienungsanleitung

30 August 2024
Black And Decker

Black And Decker KSTR8 Bedienungsanleitung

24 August 2024
Black And Decker

Black And Decker BDCS50 Bedienungsanleitung

10 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024