BJZ C-193 2334 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BJZ C-193 2334 (1 Seiten) in der Kategorie Messung. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
BJZ Industriedienst und Vertrieb, D-75031 Eppingen, Tel: 07262/1064 Fax: 07262/1063 Operating manual WRIST STRAP MONITOR
03/07 - am.doc
Order numbers: C-193 2334 (4,5 mm press stud), C-193 2331(10,3 mm press stud)
The system consists of two parts: monitor and adapter
Mounting and wiring
A 9 V adapter with fixed voltage and a 3,5 mm stereo jack serves as power
supply (external positive pole).
Connect the stereo jack with the monitor and plug the adapter into the power
socket.
It is recommendable to mount the monitor at eye level right above the
workstation by using, for example, Velcro.
The black ground conductor of the monitor must be connected to the protective
conductor of a second power socket by using, for example, a BJZ grounding
box.
Finally, the wrist strap is attached to the monitor.
Function
Place the switch in direction of the word "Aktiv". If the wrist strap is applied
correctly, the "Safe" - LED will be illuminated.
If the red "Fault" - LED is flashing and a warning signal can be heard, this may
have the following reasons:
• the wrist strap has been removed
• there is no connection between the ground and the monitor
• the wrist strap is damaged
• the coil cord is damaged
Identify the reason of the alert and fix the problem.
If the person connected to the monitor wants to leave the workstation, the switch
must be placed in direction of the word "Stand by". In this case the warning
signal is not actuated, but the flashing "Fault" - LED reminds the person to put
on the wrist strap again.
Approach in case of failure
Check the wiring and wrist strap for functional capability. If necessary calibrate
the monitor.
Calibration
1. Necessary tools:
- defined resistance (e.g. resistance box), junction cord
2. Setup
The setup of the components must be arranged like in the following drawing:
Power supply
adapter 9V
Resistance box
Connection to
g
round
Connection for press stud
grounding cord
Borehole for adjustment
Adjustment
When using grounding cords with 1 x 10 6
Ω protective resistance, the resistance
box should be regulated to 3 x 106 .Ω
When using grounding cords with other protective resistance, the resistance box
should be regulated to + 2 x 106 .Ω
Connect the monitor to the power supply and place the switch in direction of
"Aktiv". By means of a screw driver the potentiometer can be reached through
the borehole saying "Adj." Adjust the potentiometer until the LED switches from
red to green, when using the appropriate resistance. If necessary, the borehole
can be sealed after adjustment.
Produktspezifikationen
| Marke: | BJZ |
| Kategorie: | Messung |
| Modell: | C-193 2334 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BJZ C-193 2334 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung BJZ
5 September 2023
Bedienungsanleitung Messung
- Messung REV
- Messung Voltcraft
- Messung Bosch
- Messung Laserliner
- Messung Velleman
- Messung Alecto
- Messung Beurer
- Messung Bresser
- Messung König
- Messung TFA
- Messung Black And Decker
- Messung Trotec
- Messung DeWalt
- Messung Megasat
- Messung Smartwares
- Messung Garmin
- Messung GOCLEVER
- Messung Perel
- Messung Workzone
- Messung Microlife
- Messung Rossmax
- Messung Amprobe
- Messung Meec Tools
- Messung Metrix
- Messung IHealth
- Messung Ansmann
- Messung Westfalia
- Messung Livington
- Messung Silverline
- Messung Yato
- Messung Be Cool
- Messung Toolland
- Messung AS Schwabe
- Messung Hager
- Messung Kyoritsu
- Messung Eurolite
- Messung GW Instek
- Messung KERN
- Messung Milwaukee
- Messung Eizo
- Messung Testo
- Messung Victron Energy
- Messung Peak
- Messung Kübler
- Messung Carrier
- Messung Lund
- Messung SHX
- Messung Gima
- Messung Testboy
- Messung Danfoss
- Messung Fantini Cosmi
- Messung Multimetrix
- Messung Extech
- Messung BENNING
- Messung Fluke
- Messung FLIR
- Messung Vemer
- Messung Ridgid
- Messung Stabila
- Messung Hikmicro
- Messung Entes
- Messung Gossen Metrawatt
- Messung Hameg
- Messung Joy-it
- Messung Megger
- Messung Muller
- Messung PCE Instruments
- Messung RK Technology
- Messung Sanwa
- Messung Sonel
- Messung Uni-T
- Messung VirtuFit
- Messung Wachendorff
- Messung TFA Dostmann
- Messung Vimar
- Messung Owon
- Messung PeakTech
- Messung Comark
- Messung Dahua Technology
- Messung YSI
- Messung Aluratek
- Messung SRS
- Messung Eltako
- Messung H-Tronic
- Messung HT Instruments
- Messung Beha-Amprobe
- Messung Chauvin Arnoux
- Messung Werma
- Messung Eastron
- Messung Emko
- Messung Pancontrol
- Messung X-Rite
- Messung CESYS
- Messung Trumeter
- Messung Kemo
- Messung ORNO
- Messung Tempest
- Messung TDE Instruments
- Messung Zircon
- Messung Kreg
- Messung Apollo Ultrasonic
- Messung Adwa
- Messung Greisinger
- Messung Qubino
- Messung Beckmann & Egle
- Messung Weidmüller
- Messung Janitza
- Messung CEM
- Messung Klein Tools
- Messung Daytronic
- Messung AREXX
- Messung Delta Ohm
- Messung Camille Bauer
- Messung Rigel Medical
- Messung UHoo
- Messung Seaward
- Messung AstroAI
- Messung P3 International
- Messung Seek Thermal
- Messung ClimeMET
- Messung Fixpoint
- Messung Condtrol
- Messung Cliff
- Messung Water-i.d.
- Messung Stahlwille
- Messung KS Tools
- Messung AkYtec
Neueste Bedienungsanleitung für -Kategorien-
4 August 2024
24 Juni 2024
24 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
22 Juni 2024
21 Juni 2024
21 Juni 2024