Bixolon SLP-DL410 Bedienungsanleitung

Bixolon Nicht kategorisiert SLP-DL410

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bixolon SLP-DL410 (39 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/39
User’s Manual
SLP-DL410KV/DL413KV
THERMAL LABEL PRINTER
Ver. 1.00
http://www.bixolon.com
Ver. 1.00
- 2 -
SLP-DL410KV/DL413KV
Introduction
The SLP-DL410KV printer is designed to be used inside a vehicle. Connect it to the HOST
device to print and control.
※
※
※
※※ The main features of the printer are as follows
1. SLP-DL410KV : Maximum 127mm/s(Max 5 ips) printing speed
SLP-DL413KV : Maximum 127mm/s(Max 5ips) printing speed
2. 4inch THERMAL LABEL PRINTER
3. 194 x 248 x 169 (W x D x H)
4. Support for multiple interfaces
- Standard(Wire): USB & USB HOST
- Option(Wire): USB & USB HOST & Ethernet
- Option(Wireless): Bluetooth
5. Easy media loading
6. Can print a range of barcodes
7. Option : Peeler, Auto Cutter
8. Vehicle only printer- ( ) Input Rated voltage: 12V
It is advisable to read the contents of this manual carefully before using the printer for the first
time.
※
※
※
※※ The input voltage rating of this product is 12V.
Therefore, be sure to use it in anenvironment that meets these specifications.
※
※
※
※※ Use only authorized supplies that can be trusted!
- We are not responsible for quality and service for damage caused by the use of
unauthorized products (or recycled ones).
Ver. 1.00
- 3 -
SLP-DL410KV/DL413KV
Safety Information
Warning: Warnings must be heeded carefully in order to prevent serious
physical harm.
Caution: Cautions must be heeded in order to prevent minor injuries, equipment
damage, or data loss.
Symbol Information
DC (Direct current)
Warning, Caution
USB
Ethernet
Ver. 1.00
- 4 -
SLP-DL410KV/DL413KV
Table of Contents
1. Content Confirmation 8........................................................................................................
2. Product Part Names ........................................................................................................... 9
3. Installation & Usage ......................................................................................................... 11
3-1 Printer Installation Placings ........................................................................................... 11
3-2 Power Connection ......................................................................................................... 12
3-3 Interface ........................................................................................................................ 14
3-3-1 Standard Interface (USB & USB HOST) ................................................................. 15
3-3-2 Optional Interface (USB & USB HOST & Ethernet)................................................. 16
3- 4 Media Installation .......................................................................................................... 17
3-5 Button & LED ................................................................................................................ 19
3-5- 1 Button Operations ................................................................................................... 19
3-5-2 LED Indicator For Various Printer Statuses ............................................................. 20
4. Self-test ............................................................................................................................. 21
5. Detailed Features.............................................................................................................. 22
5-1 Stand alone Configuration Mode- ................................................................................... 22
5-1-1 Start Stand-alone Configuration Mode and execute each function .......................... 22
5-1-2 Function List Of Stand-alone Configuration Mode ................................................... 22
5-2 Pause/Cancel ................................................................................................................ 23
5-2-1 Pause/Resume Function ......................................................................................... 23
5-2-2 Print Cancellation .................................................................................................... 23
5-3 Smart Media Detection .................................................................................................. 24
5-4 Gap Sensor Auto Calibration Mode ............................................................................... 24
5-5 B/M Sensor Auto Calibration Mode ............................................................................... 25
5-6 Media Sensor Manual- Calibration ................................................................................. 26
5-7 Data Dump Mode .......................................................................................................... 27
5-8 Factory Reset ................................................................................................................ 27
5-9 Print Standby Mode ....................................................................................................... 28
5-9-1 About Print Standby Mode ....................................................................................... 28
5-9-2 How to switch the printer from Standby Mode to Print Ready Mode ....................... 28
5-10 Media Installation Method of Peeler (Option) Model ................................................... 29
5- -10 1 When using Large media roll (Option)................................................................... 31
5-11 Auto Cutter (Option) ..................................................................................................... 32
5-12 RTC(Real Time Clock / Option)- ................................................................................... 33
6. Printer Maintenance ......................................................................................................... 34
6-1 Cleaning Printer Head ................................................................................................... 34
6-2 Cleaning Sensors, Roller or/and media Path ................................................................ 35
7. Appendix ........................................................................................................................... 36
7-1 Specifications ................................................................................................................ 36
7-2 Label Types ................................................................................................................... 36
Ver. 1.00
- 5 -
SLP-DL410KV/DL413KV
Manual Information
This user’s guide contains basic information for product usage as well as for emergency
measures that may be required.
※ The following separate manuals provide more detailed content on various technological
issues and areas.
1. Windows Driver Manual
functions of the windows driver.
2. Unified Label Utility- II Manual
of this product, operating condition modification, etc.
3. Programming (SLCS) Manual
4. True Font Downloader Manual
This manual provides information on the usage of the font downloader that can
5. Network Connection Manual
interface.
6. Bluetooth Connection manual
This manual provides information on connection instructions the Bluetooth interface.
can make labels by adding text, graphics, or barcodes at desired positions.
Ver. 1.00
- 6 -
SLP-DL410KV/DL413KV
Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Warnings must be heeded carefully in order to prevent serious physical harm.
Do not bend the cable by force or leave it under any
heavy object.
• A damaged cable can cause a fire.
Do not plug in or unplug with your hands wet.
• You can be electrocuted.
Keep the plastic bag out of children’s reach.
• If not, a child may put the bag on his head.
W
W
W
WW .
.
.
. .
hen unplugging, do not pull
hen unplugging, do not pull
hen unplugging, do not pull
hen unplugging, do not pullhen unplugging, do not pull on the cord
on the cord
on the cord
on the cord on the cord
• This may damage the cord and lead to a fire or a failure.
You must use only the supplied cable.
• - . Use of non related cables may cause printer failure
Do not use multi-sockets.
• This can provoke over heating and a fire.-
• They can cause the printer to malfunction.
PROHIBIT
PROHIBIT
PROHIBIT
PROHIBIT
PROHIBIT
ONLY SUPPLIED CABLE
PROHIBIT
Ver. 1.00
- 7 -
SLP-DL410KV/DL413KV
CAUTION
Cautions must be heeded in order to prevent minor injuries, equipment
damage, or data loss.
Do not use the printer when it is out of order. This
can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
Do not let water or other foreign objects in the
printer.
• If this happened, switch off and unpl
ug the printer before
calling your dealer.
Use only approved accessories and do not try to
disassemble, repair or remodel it for yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
Install the printer on the stable surface.
•
If the printer falls down, it can be broken and you can hurt
yourself.
Keep the desiccant out of children’s reach.
• If not, they may eat it.
If you observe a strange smoke, odor or noise from
the printer, unplug it before taking following
measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
TO UNPLUG
PROHIBIT
DISASSEMBLING
PROHIBITED
PROHIBIT
PROHIBIT
TO UNPLUG
PRINTER
PRINTER
PRINTER
PRINTER
DEALER
PRINTER
Ver. 1.00
- 8 -
SLP-DL410KV/DL413KV
1. Content Conrmation
The following items should all be contained in the printer package.
Contact the dealer from which the purchase was made if any item is damaged or missing.
SLP- DL410KV KV/DL413
Cigar Jack Cable
Quick Manual
※
※
※
※※
Optional
USB Cable
Ver. 1.00
- 9 -
SLP-DL410KV/DL413KV
2. Product Part Names
Feed/Cancel Button
Cover Lever
Pause Button
Printer Head
Media Cover
Sensor
Cover STD
Media Guide
Roller
Ver. 1.00
- - 10
SLP-DL410KV/DL413KV
Printer
Power Switch
Fan
- Fold
Media Slot
Printer
Power Port
USB B
-
Type Port
USB
A- Type Port
Power
Converter Switch
Power Con verter Port
Ver. 1.00
- - 11
SLP-DL410KV/DL413KV
3. Installation & Usage
3- 1 Printer Installation Placings
• Install the printer in a location that meets the following conditions.
- Allow sufficient space around the printer for proper ventilation.
- Install the printer on a flat and level surface.
- Avoid humid environment.
Ver. 1.00
- - 13
SLP-DL410KV/DL413KV
Caution
- Only use a cable provided by BIXOLON.
BIXOLON shall bear no responsibility for damage caused
by using a third-party cable.
- When removing the cigar jack cable, make sure you have a firm
grasp the printer, then pull horizontally.
Warning
- Before starting the vehicle, disconnect the cigar jack cable from
the cigar jack socket. Voltage surge may cause damage and/or
fire.
- The input voltage rating of this product is only 12V, so be sure to
use it according to the specifications to avoid damage and fire.
- Do not operate the printer and power supply in a humid
environment. This can cause serious electrical damage and
bodily injury.
- Do not connect an input voltage beyond the specifications of
the power supply. This may result in product damage and fire.
- When connecting the printer, do not use a multi-
socket. Instead,
connect directly to the cigar jack socket to avoid product damage
and fire.
Ver. 1.00
- - 14
SLP-DL410KV/DL413KV
3-3 Interface
Note
Shielded cables must be used to p
revent radiation and reception of
electrical noise. Use the shortest possible communication cable to
minimize the detection of electrical noise in the cable.
- -USB B Type Cable (1.8m or less recommended)
- LAN(Ethernet) Cable (3m or less, CAT-5 or higher UTP Cable)
Caution
- Connecting unshielded communication cables is in violation of EMC
standards. Use the cable approved by us.
- Do not bundle the communication cable with objects that may cause
electrical noise and interference. The printer may be damaged.
- Be aware that the product's electronic components may be damaged
due to discharging of electrostatic energy that accumulates on the
surface of the body or other objects.
Warning
After turning off the power switch of , connect and printer
disconnect the communication cable.
This can cause serious electrical damage and bodily injury.
Ver. 1.00
- - 15
SLP-DL410KV/DL413KV
3-3-1 Standard Interface (USB ) & USB HOST
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
- -USB B Type Cable
- - (USB A Type WLAN Dongle or Bluetooth Dongle)
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
- Connect USB B-Type cable to the USB port.
- Connect USB A-Type (WLAN Dongle or Bluetooth Dongle) to the HOST Port.
Caution
Be aware that the product's electronic components may
be damaged
due to discharging of electrostatic energy that accumulates on the
surface of the body or other objects.
USB B-Type Cable
USB
A- Type
Ver. 1.00
- - 17
SLP-DL410KV/DL413KV
3-4 Media Installation
1) Pull the cover levers on both sides of the media cover and open the media cover.
2) Install the Fan Fold media in the media 3) Adjust the media guides to the width of -
slot on the back. the media.
4) After Installation the media, lift the media and manually set the sensor(Black Mark & Notch -
Sensor) to the correct position.
Fan
- Fold
Media Slot
Black Mark & Notch Sensor
●
●
M Cedia over
Cover Lever
Media Guide
Ver. 1.00
- - 18
SLP-DL410KV/DL413KV
Caution
- When opening or closing the cover, be careful not to pinch your
fingers.
- Do not open the print head levers while the printer is printing.
The printer may be damaged.
- Change the media when the printer is not receiving data, or data may
be lost.
Warning
While the printer is operating, the print head gets very hot,
so turn off the power and let it cool down completely.
The hot print head can cause serious burns.

Produktspezifikationen

Marke: Bixolon
Kategorie: Nicht kategorisiert
Modell: SLP-DL410

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bixolon SLP-DL410 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Bixolon

Bixolon

Bixolon SRP-770III Bedienungsanleitung

5 September 2024
Bixolon

Bixolon SMP6200II Bedienungsanleitung

5 September 2024
Bixolon

Bixolon SMP6210 Bedienungsanleitung

5 September 2024
Bixolon

Bixolon SMP6350 Bedienungsanleitung

5 September 2024
Bixolon

Bixolon XQ-840II Bedienungsanleitung

4 September 2024
Bixolon

Bixolon SRP-Q300II Bedienungsanleitung

4 September 2024
Bixolon

Bixolon SRP-S320 Bedienungsanleitung

20 August 2024
Bixolon

Bixolon SRP-350V Bedienungsanleitung

14 August 2024
Bixolon

Bixolon SRP-350plusV Bedienungsanleitung

6 August 2024
Bixolon

Bixolon SRP-Q300B Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

BEKO

BEKO BBVM17400B Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DXV34PTA Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DCF414 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DXIRFFP25 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DXIR1A1A2P3 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DCE450 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DCMAS5713 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DCMASBC1 Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DXKH180E Bedienungsanleitung

4 Dezember 2024
DeWalt

DeWalt DWE46150 Bedienungsanleitung

4 Dezember 2024