Binatone Symphony 3325 Bedienungsanleitung

Binatone Schnurlose DECT-Telefone Symphony 3325

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Binatone Symphony 3325 (2 Seiten) in der Kategorie Schnurlose DECT-Telefone. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
USER GUIDE
Package Contents
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit
and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
> Any large metal object, such as a refrigerator, mirror or filing cabinet,
between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3) Do not place close to another telephone, a TV or audio equipment - it
may cause interference.
4) Out of Range warning. If you hear a warning tone during a call,
and/or the sound in the earpiece becomes faint or distorted, you may be
going out of range of the base unit, so move nearer to the base unit
within 20 seconds, otherwise the call may be cut off.
a DECT phone: Maximum range up to 300 metres outdoors or 50
handset and the base is in accordance with the normal standards for
metres indoors. Be aware that:
Connection and Conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. This phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
1 Handset (2 with a Twin system, 3 with a Triple system)
1 Base Station
1 Mains Power Adapter
1 Telephone Line Cord
2 Rechargeable Batteries for each handset
1 Charger Pod with mains power adapter for each additional
1 User Guide
handset of a multi-handset system
•
•
•
•
•
•
•
1
TECHNICAL DETAILS
Standard
Frequency range
Channel bandwidth
Operating range
Operating time
Temperature range
Digital Enhanced Cordless
Telecommunication(DECT)
1.88 to 1.9GHz (bandwidth = 20 MHz)
1.728 MHz
Up to 300m outdoors; up to 50m indoors
Standby: 100 hours. Talking: 10 hours
Battery charge time:15 hours
Operating 0 C to 40 C, Storage -20 C to 60 C
Port specification
The port (connect ed to the mains power supply) is a
SELV port with respect to EN41003.
Every effort has been made to ensure high standards of reliability for your
consult your supplier or the Helpline.
do not try to
Electrical power
Charger unit:
Handset Battery Information :
2 x AAA size NiMH 400mAh
Base unit:
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA
input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA
Caution
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
The
port (connected to the telephone line) is a TNV port with respect to
system. However, if something does go wrong, please
repair it yourself,
EN41003.
23 4
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury, including the following:
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4) Do not use this product near water (for example, near a bath tub, kitchen
sink, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to our Repair
•
•
•
•
7) NEVER use your cordless telephone outdoors during a thunderstorm -
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The
operation periods for the handsets are only applicable with the default
battery capacities.
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the
11) Do not use third party charging bays, as they may cause damage to the
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or
The manufacturer will not be held liable for damage arising from such
non-compliance.
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the operating
If the product has been dropped and the cabinet has been damaged.
If the product exhibits a distinct change in performance.
Centre under the following conditions:
unplug the base from the telephone line and the mains socket when there
put them where they could get punctured.
are storms in your area. Damage caused by lightning is not covered by
unit or surroundings.
instructions.
the guarantee.
5 6
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
1) Plug the power adapter & line cord
into the base station.
2) Plug the power adapter into a 230Vac, 50Hz
2.2 Installing and charging the batteries
1) Slide open the battery compartment cover.
2) Place the 2 batteries with the correct polarity,
3) Slide the battery compartment cover back.
4) Put the handset on the base and charge for
15 hours before first time use. The handset
beeps when charging starts.
as shown.
Warning: Always use the line cord provided in the box.
Warning: Only use the power adapter supplied.
Warning: The Base unit needs mains power for
Other line cords may not be compatible and may not work.
Others will result in non-compliance with the safety
specification EN60950, and will invalidate any approval
given with this apparatus.
normal operation, not just for charging the handset batteries.
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may
get interference between the telephone and the broadband, which could cause
problems.
In a home with broadband, every telephone must have a micro-filter
just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband provider.
2.3 If you have a Broadband Line
Warning: Only use the AAA size NiMH rechargeable
mains socket, the other end of the line cord
into your telephone line socket.
batteries.
3 GETTING TO KNOW YOUR PHONE
3.1 Overview of the Handset
connected, not
7
3.3 Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Steady when the handset is in range of the base. Flashes when out of
Steady when an intercom call is in progress.
Flashes during intercom ringing.
Steady on when a call is in progress.
On when the speakerphone is turned on.
Steady on when the telephone answering machine (TAM) is turned on.
Flashes when there is a new TAM messages.
Indicates that the handset ringer is switched off.
Indicates when the battery is fully charged.
Whole icon flashes when the battery is charging. Internal
block icon flashes when the battery is in final charging stage.
range of the base or not registered to the base.
Flashes when there is an incoming call.
Steady on when an alarm is set.
Flashes when the alarm time has been reached.
On when the keypad is locked.
On when you have a new Voice Mail message. (This is a caller display
service and is not usually available from UK network providers.)
Indicates when there are more characters or numbers in front of those
Indicates when there are more characters or numbers after those being
Press
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
being displayed.
displayed.
(MENU)
1. PAGE
Press the Page on the base station to page your
Press to turn on the answering machine.
Press again to turn off the answering machine.
Press to play the message.
Press to stop the message playback.
Press to repeat playing the current message from the beginning.
Press to skip the current message and play the next message
Increase (+) speaker volume
Decrease (-) speaker volume
Press once to delete the message during playback
Press and hold to delete all the old messages
handset. It will ring for approximately 60 seconds.
10.
7-SEG LED DISPLAY
3.2 Base Station with Telephone Answering Machine (TAM) Control
2. CHARGING CRADLE
- - Steady ON : The answering machine is turned OFF.
00 Steady ON: Answering
XX Flashing: There are XX new messages recorded where XX is from
01 to 59
Steady ON: There are XX old messages in the TAM memory and no new
XX/FFFlashing XX alternately with FF: There are XX new voice messages
recorded and the TAM memory is full.
Flashing FF : TheTAM memory is full and there are no new messages.
- - /XX Flashing XX alternately with - -: The time is not set and there are XX
Flashing--: The time is not set and there are no new messages recorded.
1
2
3
3. TAM ON/OFF
4. VOLUME UP (+)
5. VOLUME DOWN (-)
4
5
6
6. PLAY/STOP
7. SKIP BACKWARD
8. SKIP FORWARD
78
9. DELETE
9
10
A1/A2 Steady ON: Playing the current outgoing message (OGM) where
XX/An Flashing XX alternately with An: Currently recording the new XX
Flashing: Remote access is in progress from a handset or via the
8
Press the MENU/OK key to confirm the current selection
Indicates a new TAM message is playing or a new call is being viewed in
Press
(BACK)
Press the C/ key to go back to previous menu level or cancel the current
the Call List.
(INT)
Press the C/ key to clear a character or stop the alarm
unmute the microphone during a call.
3.4 Menu Structure
In idle mode, press <MENU/OK> to go to CALL LIST, the first option in the
menu list.
Main
Menu CALL LIST PHONEBOOK BS
SETTINGS HS
SETTINGS REGISTRATION DEFAULT
Sub
menu
PIN? - - - -
<UP/DOWN>
Key
<MENU> <UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
Shows EMPTY
or first Call List
<MENU/OK>
ADD TO PB
DELETE
DELETE ALL
DETAILS
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
BS RINGER
FLASH TIME
CHANGE PIN
ALARM
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
entry: Then
Shows EMPTY
Then
ANS. MACHINE
MSG PLAYBACK
DELETE ALL
MEMO
TAM ON/OFF
TAM SETTINGS
ANSWER MODE
TAM LANGUAGE
OGM SETTINGS
ANSWER DELAY
RECORD TIME
REMOTE ACC.
COMPRESSION
CHANGE PIN
Press
<UP/
DOWN>
for: <MENU/OK> for:
or first
Phonebook entry:
Press <UP> or <DOWN> to go to other options in the menu list.
Press <MENU/OK> to enter a sub-menu or function.
Press <C> to go back to the previous level.
Refer to the following for the menu structure.
3.5 Text and Digit Entry Table
The following tables show you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad.
This will be helpful when storing a name in the phonebook and
renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character
is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to amend
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
the text entry.
910
Key
Press 1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 space - 1 1
2 A B C 2 2
3D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
00, P (Pause)
**? / \ ( ) *
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
# # ' , - , &
Key
3.5.1 English Character Set
0
Key
Press 1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A B C 2 2
3D E F 3 3
4 G H I 4 4
5 J K L 55
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
00, P (Pause)
**
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
#
Key
0
3.5.2 Polish Character Set
Ł
Key
Press 1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A
B C 2 2
3D E F 3 3
4 G H I 4 4
5 J K L 55
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
00, P (Pause)
**
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
#
Key
0
3.5.3 Norwegian Character Set
Æ
Ø
*? / \ ( )
# ' , - , &
*? / \ ( )
# ' , - , &
11 12
4 USING YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory Dialling
Enter the phone number and press <TALK ON> or <SPEAKERPHONE> to dial
the number. When entering the number, if you make a mistake, press <C> to
delete digits.
4.1.2 Direct Dialling
Press <TALK ON> or <SPEAKERPHONE> to connect to the line and then enter
the phone number. ( Note: if you enter a wrong digit you cannot correct it with
the <C> key.)
4.1.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to
select the desired phonebook entry. Press <TALK ON> or <SPEAKERPHONE>
to dial out to the selected phonebook entry. Note: You can also access the
<DOWN>, <MENU/OK>
4.1.4 Call from the Call List
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Call List entry. Press <TALK ON> or <SPEAKERPHONE> to dial out to the
selected Call List entry.
4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
desired redial number. Press <TALK ON> or <SPEAKERPHONE> to dial out to
the selected redial number.
4.1.6 Call
timer
Your handset automatically times the duration of every call. The call timer is
It is shown in hours, minutes
and seconds format (HH:MM:SS).
4.2 Answer a Call
If the handset is not on the base or a charging cradle:
When the phone rings, press <TALK ON> or <SPEAKERPHONE> to answer
the call.
If the handset is on the base or a charging cradle, and if AUTO ANSWER is set
When the phone rings, pick up the handset to answer the call automatically,
displayed as soon as you answer a call or 15 seconds after dialling, and remains
on the screen for 5 seconds after the end of a call.
without having to press any button.
to ON:
4.3 End a Call
During a call connection, press <TALK OFF> to end the call.
OR
Put the handset on the base station or a charging cradle to end the call.
4.7 Turn on the Keypad Lock
In idle, press and hold the <*> key to turn on the keypad lock. The keypad lock
icon < > will be displayed on the LCD.
4.8 Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name in
The most recent last number will display at the top of the redial list.
4.8.1 Redial
a Number
from the Redial List
1. In idle mode, press <DOWN> to access the redial list.
Note: If the redial entry shows a name, press the <#> key to view the number.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> or <SPEAKERPHONE> to dial the selected redial
Note: If there are no numbers in the redial list, the display shows “EMPTY ”
4.4 Adjust Earpiece and Handsfree Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the
earpiece and handsfree volumes.
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown. When
you end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
4.6 To Turn the Handset Ringer Off
In idle, press and hold the <#> key to turn off the handset ringer.
The ringer off icon < > will be displayed on the LCD.
When the ringer is off, press and hold the <#> key to turn the ringer back on.
Note: You can still use the <TALK ON> key to answer a call when the handset
When the keypad is locked, press and hold the <*> key to unlock it.
is ringing.
number.
the phonebook to go with the number, the name will be displayed instead.
4.8.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
3. Press <MENU/OK> and then enter the name you want to use in your
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show MELODY 1.
Phonebook.
6. Press <UP/DOWN> to browse the melody list. The respective melody will
be played when browsing the melody list. (Note: the selected ring tone will
7. Press <MENU/OK> to confirm the selected melody and to save the entry.
matches the stored number.)
only be played if you subscribe to Caller Display and the incoming number
Press <C/ > to mute the microphone and “MUTED ” will display on the LCD.
Your caller cannot hear you. Press <C/ > again to unmute the microphone.
13 14
4.8.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm, and the entry will be deleted.
4.8.4 Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to show CONFIRM?
4. Press <MENU/OK> again to confirm. All entries will be deleted and the
4.9 Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show PAGING
on the LCD. You can stop the paging by pressing <TALK ON>/ <TALK OFF> /
<C/MUTE> on any handset or <PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
4.10 Make an Internal Call
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls. If the called handset is not
answered within 60 seconds, the called handset will stop ringing and the calling
handset will return to standby mode.
Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display NOT POSSIBLE. “
4.10.1 Intercom Another Handset
1. In idle mode, press <C/MUTE/INT> and all the other registered handset
numbers will display, along with a "9".
2. Enter the number of the handset that you want to call, or enter <9> to call
display will show EMPTY.
all handsets.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handset numbers
will display.
2. Press <9> to ring to all registered handsets.
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU/OK> and <UP/DOWN> to select INTERCOM.
2. Press <MENU/OK> to show all the other registered handset numbers, plus "9".
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish an internal call.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.10.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom). The three parties can share the conversation and no
additional network subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold the <*> key on the calling handset to establish the
conference call.
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the external call.
Note: If the other handset has not answered the intercom call,
intercom and return to the external call by pressing <TALK OFF> at any time.
If the other handset does not answer the intercom call within 60 seconds, the
intercom will stop and you will return to the external call automatically. 
Note: If only two handsets are registered to the base station, pressing
will call the other handset immediately.
<C/MUTE/INT>
Note: If there is an external call while your are on an intercom call, you'll hear
warning beeps, and will have to end the intercom call before you can answer the
external call.
3. The called handset rings. Press <TALK ON> on the called handset to
establish the internal call.
Enter the number for the handset you want to transfer the call to.
you can stop the
incoming call instead of paging.
15 16
Remote operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide
1
2
3
4
Note: <*> key must be entered while the OGM is still playing, and the 4-digit
consecutively, the line will be released
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
The
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times
automatically.
.5.8.1 on page .
system
830
Symphony 3325
OFF
TALK
Red ial
Ca lls
Use with icons on display above,
to open menu and confirm options.
From idle: access the Call List
In lists: move up the options
During calls / ringing: increase the volume
Make or answer calls
From idle: access the Redial List
In lists: move down the options
During calls / ringing: decrease the volume
Opens the phonebook.
1 EARPIECE
13 MICROPHONE
2 UP < >
3 LEFT SOFT KEY (MENU/OK)
4 TALK ON < >
5 DOWN < >
12 PHONEBOOK < >
Sends a recall (R) signal, used for some PBX / Calling Features.
11 R (Recall or Flash) KEY
Press and hold to turn ringer on / off.
10 (HASH) KEY
End a call or return to previous menu.
9 TALK OFF < >
Press and hold to turn the handset on / off
Use with icons on display above, to clear
characters, go back to previous menu, mute
8 RIGHT SOFT KEY
(CLEAR/BACK/MUTE/INTERCOM) < >
the microphone or make an intercom call.
Turns the speakerphone on / off.
7 SPEAKERPHONE < >
Press and hold to lock /unlock keypad.
6 (STAR) KEY
Re dial
Cal ls
TALK
OFF
3
4
1
6
7
9
10
11
12
8
5
2
13
www.binatoneonline.com
or visit our website:
**Please note that all calls are charged at local rate
Binatone Helpline
Monday to Friday
Tel: 0845 345 9677
Digital Cordless Telephone
(for UK only)
Symphony 3325
With Telephone Answering
from 9:00am to 5:00pm
Symphony 3325 Twin
Symphony 3325 Triple
Machine(TAM)
Symphony 3325
batteries.
machine ON and there are no messages recorded
messages.
FF
new messages recorded.
- -
A1 is the Answer & Record OGM and A2 is the Answer Only
OGM.
incoming message.
LX Steady ON: Indicates the current volume level where X is from 0 to 8
external line.
Indicates
more options available in lists, above or below.
.
.
the MENU/OK key to access a menu list
the C/ key to start an Intercom call.
action.
or to mute /
.
phonebook by pressing <MENU/OK>,
(Only available
if
you
subscribe
to
Caller
Display
with your network provider)
Note: You can also access the Call List by pressing
<MENU/OK>
Note: The display will still indicate an incoming call, even if the ringer is turned off.
(Only available on multi-handset systems.)
BS SCREENING
RING VOLUME
DELETE HS
DIAL MODE
rA
Press twice to skip back and play the previous message.
twice.
6. Edit the number using the <C/MUTE/INT> key to delete numbers, and
7. press <MENU/OK> to
Press <UP/DOWN> to select the ringtone and
press <MENU/OK> to confirm the number.
confirm.
5 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names and
Each phonebook entry can have a maximum of 20 digits for the phone number
and 12 characters for the name. You can also select different ringtones for your
phonebook entries. (Note: the different ringtones only play if you subscribe to
Phonebook entries
5.1 Add a New Phonebook Entry
From idle mode:
1. Press <PHONEBOOK> to access the phonebook.
OR
Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and
then press <MENU/OK> to access the phonebook.
2. Press <MENU/OK> to show ADD.
3. Press <MENU/OK> and then enter the name.
4. Press <MENU/OK> and then enter the number.
5. Press <MENU/OK> and <UP/DOWN> to select the desired ringtone for
6. Press <MENU/OK> to store the phonebook entry.
5.2 Search for a Phonebook Entry
From idle mode:
1. Press <PHONEBOOK> to access the phonebook.
2. Enter the first letter of the name using the alphanumeric keys (e.g. if it
5.3 View a Phonebook Entry
From idle mode:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU/OK> and <UP/DOWN> to show VIEW.
4. Press <MENU/OK> and <UP/DOWN> to review the name, number and
melody of the selected phonebook entry.
Note: If number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
Caller Display and the incoming number matches the stored number.)
are stored alphabetically by name.
begins with C, press the 2 key three times), and then press <UP/DOWN>
to scroll to the entry you want.
numbers.
your phonebook entry.
5.4 Edit a Phonebook Entry
From idle mode:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU/OK> and <UP/DOWN> to show EDIT.
4. Press <MENU/OK> to display the current name.
5. Edit the name using the <C/MUTE/INT> key to delete letters, and press
<MENU/OK> to confirm the name.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .................................................................................. 4
2
1
INSTALLING YOUR PHONE ................................................................................................... 5
2.1 CONNECTING THE BASE STATION .................................................................................................................5
2.2 INSTALLING AND CHARGING THE BATTERIES .............................................................................................5
3
GETTING TO KNOW YOUR PHONE ...................................................................................... 6
6
CALLER DISPLAY (NETWORK DEPENDENT) .....................................................................17
5PRIVATE PHONEBOOK .......................................................................................................15
4USING YOUR PHONE ...........................................................................................................11
3.1 OVERVIEW OF THE HANDSET .........................................................................................................................6
MAKE A 3-WAY CONFERENCE CALL ......................................................................................................... 14
4.10.4
TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET .....................................................................144.10.3
CALL ALL HANDSETS
4.10.2 .................................................................................................................................13
INTERCOM ANOTHER HANDSET ...............................................................................................................134.10.1
6.4 DELETE ALL CALL LIST ENTIRES ................................................................................................................18
6.3 DELETE AN ENTRY FROM THE CALL LIST ...................................................................................................18
6.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK .............................................................................18
6.1 VIEW THE CALL LIST ...................................................................................................................................... 18
5.7 CHECK THE PHONEBOOK USAGE ............................................................................................................... 17
5.6 DELETE THE ENTIRE PRIVATE PHONEBOOK ............................................................................................. 17
5.5 DELETE A PHONEBOOK ENTRY ...................................................................................................................17
5.4 EDIT A PHONEBOOK ENTRY .........................................................................................................................15
5.3 VIEW A PHONEBOOK ENTRY .........................................................................................................................15
5.2 SEARCH FOR A PHONEBOOK ENTRY ..........................................................................................................15
5.1 ADD A NEW PHONEBOOK ENTRY .................................................................................................................15
4.10 MAKE AN INTERNAL CALL ............................................................................................................................13
4.9 FIND THE HANDSET .......................................................................................................................................13
4.8 REDIAL THE LAST NUMBER .........................................................................................................................12
4.7 TURN ON THE KEYPAD LOCK ....................................................................................................................... 12
4.6 TO TURN THE HANDSET RINGER OFF .........................................................................................................12
4.5 MUTE A CALL .................................................................................................................................................12
4.4 ADJUST EARPIECE AND HANDSFREE VOLUME ........................................................................................ 12
4.3 END A CALL ....................................................................................................................................................11
4.2 ANSWER A CALL ............................................................................................................................................11
4.1 MAKE A CALL .................................................................................................................................................11
3.5 TEXT AND DIGIT ENTRY TABLE ......................................................................................................................9
3.4 MENU STRUCTURE .......................................................................................................................................... 9
3.3 DISPLAY ICONS AND SYMBOLS ......................................................................................................................8
3.2 BASE STATION OVERVIEW .............................................................................................................................7
2.3 IF YOU HAVE A BROADBAND LINE ................................................................................................................5
REMOTE OPERATION ..........................................................................................................16
....................................................................................... 33
ANSWERING MACHINE .......................................................................................................24
PHONE SETTINGS
................................................................................................................19
DATE AND TIME SETTINGS ...........................................................................................................................
SET THE ANSWER MODE ..........................................................................................................................27
SET THE OUTGOING MESSAGE (OGM) LANGUAGE ...............................................................................27
RECORD YOUR OWN OUTGOING MESSAGE (OGM) .............................................................................. 27
PLAYBACK AND DELETE THE OUTGOING MESSAGE (OGM) ................................................................ 27
SET THE ANSWER DELAY
8.5.5 .........................................................................................................................28
SET THE MAXIMUM RECORDING TIME OF INCOMING MESSAGE ..........................................................28
CHANGE THE COMPRESSION RATE .......................................................................................................30
ACTIVATE REMOTE ACCESS ....................................................................................................................30
ANSWERING MACHINE SETTINGS ...............................................................................................................27
RECORD MEMO ..............................................................................................................................................26
DELETE ALL MESSAGES IN THE ANSWERING MACHINE .........................................................................26
LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE ....................................................................25
TURN ON/OFF THE ANSWERING MACHINE ................................................................................................25
HANDSET SETTINGS ...................................................................................................................................... 20
BASE SETTINGS .............................................................................................................................................22
REGISTRATION ...............................................................................................................................................24
RESET YOUR PHONE .....................................................................................................................................24
ALARM SETTINGS .........................................................................................................................................20
.................................................................................................34
7
7.1
7.2
7.3
7.4
7.5
7.6
8
8.1
8.2
8.3
8.4
8.5
8.5.1
8.5.2
8.5.3
8.5.4
8.5.6
8.5.7
8.5.8
9 TROUBLESHOOTING ...........................................................................................................32
REMOTE OPERATION ..........................................................................................................29
10 DECLARATION OF CONFORMITY
11 GUARANTEE AND SERVICE
8.5.9 CALL SCREENING .......................................................................................................................................31
19
19 20
17 18
5.5 Delete a Phonebook Entry
From idle mode:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the phonebook entry you want to delete.
3. Press <MENU/OK> and <UP/DOWN> to show DELETE.
4. Press <MENU/OK> to confirm, and the entry will be deleted.
5.6 Delete Phonebook
1. Press <PHONEBOOK> to access the phonebook.
2. Press <MENU/OK> and <UP/DOWN> to show DELETE ALL.
3. Press <MENU/OK> to show CONFIRM?.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display
5.7 Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset
and how many spaces are available for you to s in the phonebook.
1. Press <PHONEBOOK> to access the phonebook.
2. Press <MENU/OK> and <UP/DOWN> to show PB STATUS.
3. Press <MENU/OK> to display how much of the phonebook is being used,
for example <14/20> means 14 entries are stored out of the total of 20
available spaces.
will show EMPTY.
6 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed the Caller Line Identification service
with your network service provider. Your phone can store up to 10 received calls
with date/time information in the Call List. The number will be shown on the screen
when the phone is ringing. If the number matches with one of the entries in your
Private Phonebook, the caller's name stored in the private phonebook will be
displayed alternately with the number and the handset will ring with the melody
associated with that phonebook entry.
If the call is from someone who withheld their number, e.g. by dialling 141,
If the call is from someone whose number is unavailable, e.g. an international
If you've got new Caller Display records, the handsets will display X NEW
CALLS in standby mode where X is the number of new calls. The new calls
6.1 View the Call List
All received calls are saved in the Call List with the latest call at the top of the list.
When the call list is full, the oldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at
the bottom line of the display.
1. Press <UP> to access the call list.
OR Press <MENU/OK> and <UP/DOWN> to show CALL LIST , and then press
2. Press <UP/DOWN> to select the desired entry.
3. Press <#> to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU/OK> and <UP/DOWN> to show ADD TO PB.
3. Press <MENU/OK> and then enter the name.
4. Press <MENU/OK> and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press <MENU/OK> and <UP/DOWN> to select the melody.
7. Press <MENU/OK> to store the entry in the Phonebook, and return to the
4. Press <MENU/OK> then <UP/DOWN> to show DETAILS, and then
<MENU/OK> to display the date and time of the call, and press
<MENU/OK> to return to the name or number.
WITHHELD will display.
call or from a private exchange, OUT OF AREA will display.
indication will remain until all the new call records have been viewed, and each
handset has to clear its own new calls.
Call List.
the centre of
6.3 Delete an entry from the Call List
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU/OK> and <UP/DOWN> to show DELETE.
3. Press <MENU/OK> to confirm.
<MENU/OK> again.
6.4 Delete all Call List entries
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU/OK> and <UP/DOWN> to show DELETE ALL.
3. Press <MENU/OK> to display CONFIRM?.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display
will show EMPTY.
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
Date and Time Settings
If you subscribe to the Caller Display service, the time and date settings will be
updated automatically when you receive an incoming call, although you may
1. Press <MENU/OK> and <UP/DOWN> to show HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to show DATE & TIME.
3. Press <MENU/OK>> and <UP/DOWN> to show DATE FORMAT.
4. Press <MENU/OK> and then <UP/DOWN> to choose a date format of
either DD-MM-YY or MM-DD-YY.
5. Press <MENU/OK> to confirm your choice.
1. Press <MENU/OK> and <UP/DOWN> to show HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to show DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to show TIME FORMAT.
4. Press <MENU/OK> and then <UP/DOWN> to choose a time format of
5. Press <MENU/OK> to confirm your choice.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK>> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET TIME.
4. Press <MENU/OK> and then enter the time information in 24 hour format.
5. Press <MENU/OK> to confirm your setting.
Note: If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET DATE.
4. Press <MENU/OK> and then enter the date information in the
format you set in Section 7.1.1.
5. Press <MENU/OK> to confirm your setting.
Note: If date has been set before, the current date will display, otherwise,
“DD-MM-YY ” will display.
7 PHONE SETTINGS
7.1
7.1.1 Change the Date Format
7.1.2 Change the Time Format
7.1.3 Set the Time
7.1.4 Set the Date
need to set the correct year.
Otherwise you will need to set the correct time and date so that the you know
when you received answering machine messages, or if you want to display the
time in standby mode.
either 12HR or 24HR.
21 22
You can set an alarm time on this phone. When an alarm is set, the alarm icon < >
ALARM ON ” flash on
activated, the alarm will sound again at the end of the snooze period of seven
minutes. You can also press and hold <TALK OFF> while the alarm is sounding,
Note:
a. A key press will still disable the alarm even if the handset keypad is
b. The alarm volume level is the same as the settings of the handset ringer
If the handset ringer is set to VOLUME OFF, the alarm still sounds at
VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the
will be emitted from the earpiece to alert the user the alarm
Once the user presses any key or presses and holds <TALK OFF> to
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no
1. Press <MENU/OK> and <UP/DOWN> to show HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to show ALARM.
3. Press <MENU/OK> and <UP/DOWN> to show ON/OFF.
4. Press <MENU/OK> to confirm your choice.
Note: If ON is selected, you will be prompted to set the alarm time.
7.2.2 Set the Alarm Time (if the Alarm is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press <MENU/OK> to display SNOOZE.
4. Press <MENU/OK> and <UP/DOWN> to show ON or OFF.
5. Press <MENU/OK> to confirm your setting.
7.2.1 Turn on/off the Alarm
7.2 Alarm Settings
is reached, the < > and “ALARM ON ” will still flash. An
to stop the alarm and turn off the snooze function.
the handset display, and the alarm tone rings for
< > and “
is shown on the handset display. When the alarm time is reached, the alarm icon
volume.
locked when the alarm rings.
alarm time
alarm tone
time is reached.
disable the alarm, the display will revert to the call duration.
paging or ringing, the alarm will sound again at the end of the snooze period.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS
.
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
7.3.1 Set the Ringer Melody for Internal Calls
7.3 Handset Settings
3. Press <MENU/OK> and <UP/DOWN> to select INT RING.
4. Press <MENU/OK> and <UP/DOWN> to select ringer melody you want to
hear for internal calls.
Note: There are 10 ringer melodies, and each will play as you step through the list.
45 seconds. You can press any key to disable the alarm. If the snooze function is
5. Press <MENU/OK> to confirm.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select EXT RING.
4. Press <MENU/OK> and <UP/DOWN> to select ringer melody you want to
hear for external calls.
Note: There are 10 ringer melodies, and each will play as you step through the list.
5. Press <MENU/OK> to confirm.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select RING VOLUME.
4. Press <MENU/OK> and <UP/DOWN> to select the desired ringer volume (a
ringer volume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the ringer off icon < > will be displayed after
5. Press <MENU/OK> to confirm.
Key Tone - a single beep is emitted when you press a key.
Low Battery Tone - emitted while you are talking on the phone to alert you that you
need to charge the handset batteries.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select TONE SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /
OUT OF RANGE.
4. Press <MENU/OK> and <UP/DOWN> to turn these tones ON or OFF.
5. Press <MENU/OK> to confirm.
7.3.2 Set the Ringer Melody for External Calls
7.3.3 Set the Ringer Volume
7.3.4 Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.
3. Press <MENU/OK> and <UP/DOWN> to select the desired language.
4. Press <MENU/OK> to confirm.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select RENAME HS.
3. Press <MENU/OK> and enter the new name, of up to 10 letters, for your handset.
4. Press <MENU/OK> to confirm.
7.3.5 Set the Handset Language
7.3.6 Rename the Handset
total of 6
confirming.
Out of Range Tone - emitted while you are talking on the phone to alert you to move
closer to the base unit, before the call is lost.
The language used on the handset display may be changed from English, if required.
The handset name, displayed in the standby mode (default HANDSET), can be
changed to any other name of up to 10 letters.
23 24
You can choose to display the time or handset name on your idle screen.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select HS DISPLAY.
3. Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME.
4. Press <MENU/OK> to confirm.
If you turn on the Auto Answer, you answer a call automatically by just lifting
the handset off the base or charger, without having to press any key.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.
3. Press <MENU/OK> and <UP/DOWN> to turn ON or OFF the auto answer feature.
4. Press <MENU/OK> to confirm.
7.3.7 Choose the Information to be Displayed in Idle
7.3.8 Set the Auto Answer
7.4 Base Settings
7. Press <MENU/OK> to confirm, and the chosen handset will be de-
registered from the base.
You may need to change the recall (flash) time if your phone is connected to a PBX.
The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms)
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired recall (flash) time
(SHORT, MEDIUM, LONG).
7.4.5 Change the Time
4. Press < OK> to confirm.
It is used to protect your phone against unauthorised use. The default system
PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to show BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to show CHANGE PIN.
3. Press <MENU/OK> and the display shows PIN?----
4. Enter the old system PIN.
5. Press <MENU/OK>, to display NEW PIN?----, and enter your new 4-digit
system PIN.
6. Press <MENU/OK>, to display CONFIRM?----, and enter your new 4-digit
system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter your new PIN at step 5 again.
7. Press <MENU/OK> to confirm.
IMPORTANT: When you purchase a Symphony 3325 system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to 5 handsets per base unit, with
1. Press and hold the PAGE icon < > on the base station for more than
station into registration mode. It will stay in
2. Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.
3. Press <MENU/OK> to display PIN?----.
4. Enter the 4-digit system PIN (default is 0000).
5. Press <MENU/OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and the
antenna icon < > will stop flashing. The handset will automatically be allocated
available handset number. This handset number is shown in the handset
display in standby mode. If the handset registration is unsuccessful, the
antenna icon< > will still flash.
about 1 minute, so the following handset sequence must
each handset's number (1 to 5) shown on its display.
7.5 Registration
Reset Your Phone
You can reset your phone to the default settings. After a reset, all your personal
settings, including your PIN numbers, the redial list and call list entries will be
deleted and all answering machine messages will be erased, but your phonebook
1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.
2. Press <MENU/OK> to display PIN?----
3. Enter the 4-digit system PIN (default = 0000)
4. Press <MENU/OK> to show CONFIRM?, if the PIN has been accepted.
5. Press <MENU/OK> again to confirm the reset.
7.6
Recall (Flash)
or LONG (600ms).
MENU/
Each handset can only be registered to one base, and will lose its registration to that
base if you register it to another base.
remains unchanged.
A 4-digit system PIN code is used for changing the system settings of the base station.
7.4.6 Change the System PIN Code
8 ANSWERING MACHINE
Your phone includes a telephone answering machine that records unanswered
calls when it is on. New messages are indicated by the TAM icon < > flashing
The answering machine can store up to 59 messages within the maximum
recording time of up to 15 minutes, depending on the compression rate set (see
section 8.5.7).
As well as recording incoming messages, you can record memos for other users
of your phone. If the answering machine memory is full, the Handset will display
Turn On/Off the Answering Machine
You can turn the answering machine on or off using the handset. When
the answering machine is set to ON, calls will be answered after the set answer
delay and, if the Answer and Record mode is set, the caller can then leave you
calls will be answered
your callers.
They will not be able to leave you a message.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM ON/OFF.
3. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.
4. Press <OK> to confirm.
¾
¾
8.1
depending on the
handset standby display mode set (see section 7.3.7), and you will have to
TAM FULL alternately with the handset's name or time,
delete some messages before any new ones can be recorded.
If the answering machine is set to ON, the TAM icon < > displays on the
If the answering machine is set to OFF, not appear
a message. When the answering machine is set to OFF,
after 14 rings and the answer only message will be played to
Listen to the Messages in the Answering Machine
When new messages are recorded on the answering machine, the TAM icon < >
Old messages will be played after all new messages are played completely.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select MSG PLAYBACK
.
3. Press <MENU/OK> to start message playback through the handset
of the message
received.
8.2
until all the new messages
to play the messages through the handset earpiece.
are played.
loudspeaker, and the screen displays the date and time
Note: The STAR icon <*> is displayed at the bottom of the LCD to indicate
that it is a new message. When a message has been played, the
STAR icon <*> will disappear and will not be shown if you listen to that
Note: If there are no messages the handset display will briefly show "00-00 00-00"
then return to MSG PLAYBACK.
4. During message playback, press <UP> or <DOWN> to increase or
decrease the message playback volume respectively.
Note: After a new message is played, it will be saved as an old
automatically unless it is deleted.
5. Press <MENU/OK> then <UP/DOWN> to select STOP, FORWARD,
PREVIOUS, DELETE to perform the following functions during message
STOP: Stop the current message playback and return to the PLAYBACK
menu.
FORWARD: Skip to play the next message. The date or time information
PREVIOUS: Repeat playing the current message from the beginning.
The date or time information of the current message will display.
DELETE: Delete the current message and start playing the next message.
Note: Alternatively, you can use the following shortcut keys to control different
operations during message playback.
Press <Key 5> to stop message playback.
Press <Key 4> once to repeat playing the current message from the beginning.
Press <Key 4> twice to skip back to play the previous message.
Press <Key 6> to skip to play next message.
Press <Key 2> to delete the current message playing, and start playing the next
Delete All Messages in the Answering Machine
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
DELETE ALL.
Note: The display briefly shows EMPTY and then returns to DELETE ALL.
2. Press <MENU/OK> and <UP/DOWN> to select
3. Press <MENU/OK> to show CONFIRM?
4. Press <MENU/OK> to delete all old messages.
8.3
6. Press <MENU/OK> to confirm.
message again.
message
playback.
of the next message will display if there is another message.
message.
You can record your memo message for another user. When you record a
the message can be
when the answering machine is turned off.
8.4 Record Memo
memo, the message counter will increase by one and
played back in the same way as answering machine messages. Memo recording
can still function even
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select MEMO.
.handset LCD
the TAM icon < > will
on the handset LCD.
flashes on the handset display
3. Press <MENU/OK> to start memo recording and “RECORDING ” is
4. Press <MENU/OK> to stop memo recording. The display shows PLAYING
displayed.
and the memo is played back. Press <MENU/OK> or let it finish playing to
save the memo.
OR
4. Press <C> at any time during RECORDING or PLAYING to stop memo
ANS. MACHINE menu.
recording without saving and return back to
on the handset display.
Press <SPEAKERPHONE>
25 26 27 28
You can use the TAM SETTINGS menu in the handset to change the settings
of your answering machine.
By default, the answer machine is set in ANS & REC mode which allows callers to
ANSWER ONLY which does not
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select ANSWER MODE.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> to confirm.
The answering machine announces the outgoing message (OGM) when it
There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode,
which can be in English or French (FRANCAIS) on this model.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.
4. Press <MENU/OK> and <UP/DOWN> to select ENGLISH or FRANCAIS.
5. Press <MENU/OK> to confirm.
8.5.1 Set the Answer Mode
8.5.2 Set the Outgoing Message (OGM) Language
8.5 Answering Machine Settings
(The currently selected option is indicated with a *.)
leave a message. This mode can be changed to
allow callers to leave a message. In that case, your callers will be prompted to call
answers a call.
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personalised OGM is deleted, the pre-set OGM will be
restored automatically.
Record Your Own Outgoing Message (OGM) 8.5.3
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY
5. Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.
6. Press <MENU/OK> to start recording your personalised OGM and
“RECORDING” is displayed on the screen.
7. Press <MENU/OK> to stop recording your personalised OGM. Your new
OGM will playback automatically.
Note: Press <C> at any time during the recording or playing back to return to
You can listen to your own personalised OGM or the pre-set OGM for ANS & REC
mode or ANSWER ONLY mode or delete your personalised OGM
cannot be deleted.
1. Press <MENUOK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> and <UP/DOWN> to select PLAYBACK.
6. Press <MENU/OK> to play your current OGM
and “PLAYING OGM” is displayed on the screen.
7. Press <MENU/OK> to stop the OGM playback or let it finish playing
and return to the previous menu.
1. Repeat Steps 1 to 6 in Section 8.5.4.1
2. Press <C> while the OGM is playing to delete your personalised OGM and
return to previous menu with the pre-set OGM restored automatically.
Note: If a pre-set OGM is playing, you are not allowed to delete it, so
pressing <C> will just stop the playback and return to the previous menu.
8.5.4
one at any time. Please note that the pre-set OGM
8.5.4.1 Playback the OGM
Playback and Delete the Outgoing Message (OGM)
You can set the number of rings before the answering machine answers and
starts playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER. If TIME SAVER is set, the answering machine
8.5.5 Set the Answer Delay
will answer after 6 rings if there are no new messages already recorded, or after
2 rings if there is a new message, so if you call in for remote access and
it doesn't answer after 2 or 3 rings, you can hang up and save on call charges.
8.5.4.2 Delete Your Personalised OGM
You can set the maximum length of the recording time of the incoming messages
8.5.6 Set the Maximum Recording Time for Incoming Messages
recording time available).
to be either 60 seconds, 120 seconds, 180 seconds or unlimited (up to the total
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
Note: If your network voice messaging service (e.g. BT 1571) is enabled, you
will need to set the ring delay on your Symphony 3325 to less than 6 rings,
otherwise the network service will answer and record incoming calls, and
prevent the Symphony 3325 from recording them.
3. Press <MENU/OK> and <UP/DOWN> to select ANSWER DELAY.
4. Press <MENU/OK> and <UP/DOWN> to select from 2 RINGS, 4 RINGS,
5. Press <MENU/OK> to confirm.
8 RINGS or TIME SAVER. (The currently selected option is indicated
with a "*".)
6 RINGS,
back later.
or record a new
Functions
Keys
While message is playing
2
Delete the current message playing.
4
Repeat playing the current message
5
Play the message Stop the current message playback
6
Skip to play the next message
7
8
Stop the current message playback
9 Turn off the answering machine
from the beginning. Press twice to
skip backward to play the previous
message.
Turn on the answering machine
While message is not playing
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.
4. Press <MENU/OK> and <UP/DOWN> to select
5. Press <MENU/OK> to confirm.
Three different compression rates (HIGH, MEDI LOW) are provided for
ing incoming message. The lower
attained, but the shorter
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.
4. Press <MENU/OK> and <UP/DOWN> to select your desired compression rate.
5. Press <MENU/OK> to confirm.
(The currently selected option is indicated with a "*".)
the total recording time available. (LOW=8 minutes, MEDIUM=11 minutes,
8.5.7 Change the Compression Rate
Your phone lets you check your messages, or otherwise operate your answering
machine, by calling the answering machine when you are away from home and
then entering a 4-digit remote access PIN from a tone-dialling phone. The 4-digit
remote access PIN code is used to prevent other people from unauthorised
access of your answering machine.
8.5.8 Activate Remote Access
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
4. Press <MENU/OK> to show PIN?----, then enter the Old PIN. (Default Remote
5. Press <MENU/OK> to show NEW PIN?----, and
6. Press <MENU/OK> to show CONFIRM?----, and then enter the New PIN again.
8.5.8.1 Change the 4-Digit Remote Access PIN
enter your new 4-digit PIN.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.
4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn the remote
access on or off, respectively. (The currently selected option is indicated with
5. Press <MENU/OK> to confirm.
8.5.8.2 Activate or Deactivate the Remote Access
a "*".)
from 60 S, 80 S, 120 S, or
(The currently selected option is indicated with a "*".)
UNLIMITED
UM and
you to select different quality levels of record
the compression rate, the higher the recording quality level
HIGH=15 minutes, approximately.)
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter your new PIN at step 5 again.
7. Press <MENU/OK> to confirm the change.
The Remote Access is activated by default, but you can deactivate it to prevent any
external access.
Access PIN is 0000).
You can ring your the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialling phone to your
2. When the answering machine answers the call and starts playing the OGM,
press the <*> key.
Note: The * must be entered while the OGM is still playing, the OGM will stop, and
the 4-digit PIN should follow without any delays.
Note: If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function.
8.5.8.3 Access Your Answering Machine Remotely
Note: If your answering machine is switched off, the phone will answer the call after
14 rings. You can press <*> and then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
When your answering machine memory is full and the answer mode is
ANS & RECORD ANSWER ONLY
automatically and will not allow callers to leave messages, but will still answer
It will change back to ANS & RECORD mode automatically after some messages
mode, the answer mode will change to
incoming calls after the pre-set number of rings.
have been deleted.
If you have difficulty with your phone, please try the suggestions listed below.
No dialling tone when
pressing <TALK ON>
a. The connection cord of the
b. The adapter cord is not plugged in
the base station.
c. Another handset is using the base
d. Wrong telephone line cord
a. Check the connections. Unplug
and plug back in the mains.
has been plugged into the base
station and the phone socket.
b. Check the mains adapter is firmly
c. Wait until the line is unoccupied.
d. Use the original line cord supplied.
When connected to a
connection after dialling.
Dialling prefix is needed . Insert the dialling prefix
"SEARCHING"
is displayed. a. Base station out of range.
b. Base station not connected to mains.
Reduce the range.
Connect base station to mains.
Service not activated Check your Subscription with network
No display. Empty battery Recharge battery
key
Problem Causes Solutions
Answering Machine
The unit does not record The answering machine is
turned off. Turn on the answering machine.
The caller cannot leave a. The answering machine a. Turn on the answering machine.
b. Erase unnecessary messages.
a. You are entering the
b. You are pressing the dial
keys too quickly.
a. If you forget the remote access
code, reset to the default settings.
b. Press each key firmly.
Try again using a touch tone
phone
message or
recording stops.
A call is being received. Answer the incoming call and try
again to record your out going
message later.
PBX, no and/or wrong
c. c.
base station is not plugged in.
correctly in
to make a call.
The call does not work.
Check that the telephone line cord
plugged into the mains socket and
into the base station.
new messages.
a message.
answering machine
remotely.
I cannot operate the
While recording an
outgoing
listening to messages,
the unit rings and
You are using a pulse telephone.
wrong remote access code
is turned off.
b. Message memory is full.
c. Answer Only mode is set.
9 TROUBLESHOOTING
3. Enter the 4-digit Remote Access PIN. If the PIN is accepted, a long beep is
played. If the PIN is not accepted three short beeps are played.
Functions
Keys While message is not playing While message is playing
2 Delete the current message playback
4 Skip to repeat playing the current message
from the beginning. Press twice to skip
backward to the previous message.
5 Play the message Stop the current message playback
6 Skip to play the next message
7 Turn on the answering machine
9 Turn off the answering machine
Stop the current message playback
8
8.5.9 Call Screening
Call Screening allows you to listen to the incoming caller on the answering machine,
before deciding whether to take the call or leave the answering machine to record a
message.
When the answering machine answers a call, the handset will display SCREEN?.
Press <MENU/OK> to listen to the incoming caller through the handset earpiece, and
the display will change to SCREENING.
At any time if you want to pick up the call, press <TALK ON> on the handset and the
message recording will be stopped automatically, but any recording up to then will
be saved.
If you don't want to pick up the call, you can press <SPEAKERPHONE> to listen
through the handset loudspeaker, or press <C> to stop the screening and return the
display to SCREEN?
c. Change to ANS & REC mode.
Technical Support
If the fault persists...
Disconnect all other instruments connected to the same line as the
Disconnect the base unit from the telephone line and plug a different phone
Try making a call. If this works, the line is OK.
If the cal l does not work, and you are using a two-way socket adapter,
into the master telephone socket.
and plug a telephone directly into the socket. If the call now works, the adapter may
call. If the call now works the fault is with
remove it
be faulty.
This telephone is not equipped with a grounding function! Therefore some of the
functions may be limited when used in PBX systems.
10 DECLARATION OF CONFORMITY
We the manufacturer / Importer : Binatone Telecom Plc,
Declare under our sole responsibility that the following product
Type of equipment: Digital cordless telephone
Model Name:
Country of Origin: China
Brand:
complies with the essential protection requirements of R&TTE Directive
the approximation of the laws of the Member States relating to
Radio Spectrum Matters, the Council Directive 2004/108/EC on the
Statesrelating to
electromagnetic
and the European Community Directive 2006/95/EC
Electrical Safety.
Assessment of compliance of the product with the requirements relating to the
essential requirements according to Article 3 R&TTE was based on Annex III
Manufacturer / Importer
(signature of authorized person)
Date Signature
Binatone
The conformity to the requirements is validated by the symbol.
NOTE: In compliance with Directive 2002/96/EC, when you purchase a
with the symbol shown on the right, you are required to
and you cannot dispose of the product as normal waste.
formed an integral part of this product and when you decide to dispose
appropriate waste disposal, in compliance with the current regulations.
Details about the location of these centres can be obtained from
your local authority.
of them you have to take them to a local recycling centre for
Notes for battery disposal
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed of with normal household waste.
Please be aware of the local rules on separate collection of batteries. The correct
disposal of batteries helps protect the environment and prevent health hazards.
product that comes
dispose of electrical and electronic equipment by separate waste collection
of the Directive 1999/5/EC and the following standard:
1999/5/EC on
approximation of the laws of the Member
compatibility (EMC)
relating to
1 Apsley Way London, NW2 7HF
This equipment and all its components, subsystems and consumable materials
purchase shown on your sales receipt. This guarantee does not cover any
faults or defects caused by accidents, misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment, or any
attempt at adjustment or repair other than through approved agents.
Please keep your sales (till) receipt this is your guarantee.
You should also keep the original packaging material.
In the unlikely event that you need to return your
While the unit is under Guarantee
1. Disconnect the base unit from the telephone line and the mains electricity
supply.
2. Pack up all parts of your Symphony 3325 system , using the original
3. Return the unit to the shop where you bought it, making sure you take your
sales receipt.
After the Guarantee has expired
Remember to include the mains adapter.
3. Call the Helpline on 0845 345 9677 (for UK only) and ask for a quotation of
for repair.
4. Make sure you include with your
5. Return your Symphony 3325 system
If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair
under Guarantee. Then...
¾Your name and address
¾A cheque or postal order for the value of the repair
* This does
not affect your statutory rights.
Department.
packaging.
to our Repair Centre while it is under guarantee, there may be handling charge.
to the address given by the Service
¾A brief description of the fault
11 GUARANTEE AND SERVICE
The Symphony 3325 system is guaranteed for 12 months from the date of
29 30
31 32
33 34
Symphony 3325 from another tone-dialling phone to switch
Symphony 3325.
Symphony 3325 system and try to make a
the other instruments.
Symphony 3325 Series
Symphony 3325 system
Symphony 3325 system.
Symphony 3325 system
All Ent esri
how
icon
for
registration mode
be completed within this time.
the next
Some answering machine functions can be operated from the base, including
The answering machine can also be controlled and set up using the handset menu
functions, as below:
playing messages and turning the answering machine on or off. See section "3.2
Base Station with Telephone Answering Machine (TAM) Control" for further details.
the previous screen without saving the personalised OGM.
the repair charge and details of where to send your
five seconds, to put the base
Radio Spectrum: EN 301406: V1.5.1 : 2003;
EMC: EN 301489-1: V1.8.1 : 2008;
EN 301489-6: V1.3.1 : 2008;
Electrical Safety: EN 60950-1: 2006.
24 Jun 2010
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select BS RINGER.
3. Press <OK> and <UP/DOWN> to select the desired melody you want from a
Note: The respective ringer melody will be played while browsing the melody list.
Press <OK> to confirm.
7.4.1 Set the Base Ringer Melody
4.
choice of 5.
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING VOLUME.
volume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
4. Press <OK> to confirm.
7.4.2 Set the Ringer Volume
6 ringer
3. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of
This operation should only be necessary if one of your handsets becomes faulty
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
7.4.3 De-register a Handset
de-register a handset from the base station. A de-registered handset will have
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE HS.
3. Press <MENU/OK> and the display shows PIN?----
4. Enter the 4-digit system PIN.
5. Press <MENU/OK> and the first handset number is displayed.
or lost and needs to be replaced.
the antenna flashing and REGISTER on the display.
6. Press <UP/DOWN> to step through the list of registered handsets, and
select the number of the handset you want to de-register.
7.4.4 Change the dial mode
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DIAL MODE.
3. Press <OK> and <UP/DOWN> to select TONE or PULSE
(The current setting is indicated by an asterisk to the right).
4. Press <OK> to confirm.
You should normally leave the dialling mode at its default setting of TONE (also
Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling
recognises PULSE dialling.
for the rest of that call.
called DTMF) unless the phone is connected to an old exchange that only

Produktspezifikationen

Marke: Binatone
Kategorie: Schnurlose DECT-Telefone
Modell: Symphony 3325

Brauchst du Hilfe?

Wenn Sie Hilfe mit Binatone Symphony 3325 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schnurlose DECT-Telefone Binatone

Binatone

Binatone Symphony 3325 Bedienungsanleitung

4 August 2024

Bedienungsanleitung Schnurlose DECT-Telefone

Neueste Bedienungsanleitung für -Kategorien-

Tiptel

Tiptel 205 PLUS Bedienungsanleitung

5 Oktober 2024
KPN

KPN Atlanta 100 HS+BS Bedienungsanleitung

5 Oktober 2024
Motorola

Motorola CD4012 Bedienungsanleitung

5 Oktober 2024
Tiptel

Tiptel 240 Bedienungsanleitung

18 September 2024
Premier

Premier Maxima 500 Bedienungsanleitung

16 September 2024
Premier

Premier Moonlight 200 Bedienungsanleitung

16 September 2024
Alcatel

Alcatel F380-S Draadloze DECT telefoons Bedienungsanleitung

10 September 2024
Alcatel

Alcatel Origin Draadloze DECT telefoons Bedienungsanleitung

10 September 2024
Alcatel

Alcatel F530 Draadloze DECT telefoons Bedienungsanleitung

9 September 2024
Alcatel

Alcatel Vision Draadloze DECT telefoons Bedienungsanleitung

9 September 2024