BeSafe iZi Go Bedienungsanleitung

BeSafe Autositz iZi Go

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeSafe iZi Go (98 Seiten) in der Kategorie Autositz. Dieser Bedienungsanleitung war für 50 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/98

1 3

click!

> 25 cm

USER MANUAL

Max. weight 13 kg

Age 0-12 mths ECE R44-04

Group 0+

104

110

116

122

128

134

140

146

152

158

164

170

176

187

193

199

8 9

! Vital information

• The child seat MUST NOT be installed in a front

passenger seat WITH AN ACTIVATED AIRBAG.

• iZi Go can be installed rearfacing on iZi Go ISOﬁx base

or can be installed rearfacing with a 3-point car belt, approved

according to UN/ECE Regulation No.16 or other equivalent

standards.

• iZi Go is approved for group 0+, rearward-facing from 0-13 kg.

• The harness straps must always be locked when the child is in

the seat.

• The harness straps must be tightened without slack and not twisted.

• The shoulder pads contain magnets. Magnets can inﬂuence

electronic equipment such as pacemakers.

• Protect any part of the child’s body which is exposed to the sun.

• Remove the baby cushion (bottom part) when the child is taller

then 60 cm, or over 4 months.

• Remove the baby cushion (bottom part) and body hugger (upper

part) when the child is taller than 65 cm, or over 6 months.

• After an accident, the seat must be replaced. Although it may look

undamaged, if you were to have another accident, the seat may not

be able to protect your child to the level to which it was designed.

• Prevent the seat from becoming trapped or weighed down by

luggage, seats and/or slamming doors.

• Make sure you can ﬁt no more than one ﬁnger between the harness

and your child (1 cm).

• DO NOT attempt to dismantle, modify or add any part to the seat.

Warranty will be void if non-original parts or accessories are used.

• Never leave your child unattended in the seat.

• Make sure all passengers are informed about how to release your

child in case of emergency.

• Make sure luggage or other objects are properly secured. Unsecured

luggage may cause severe injuries to children and adults in case

of accidents.

• Never use the seat without the cover. The cover is a safety feature

and may only be replaced by an original BeSafe cover.

7 10 11 16

20 21

17 18

click!

< 60 cm

0-4 months

60-65 cm

4-6 months

> 65 cm

> 6 months

Thank you for choosing BeSafe iZi Go

! It is important that you read this user manual BEFORE

installing your seat. Incorrect installation could endanger

your child.

10 11

• Carrying handle (1a)

• Head cushion (1b)

• Handle release buttons (2x) (1c)

• Shoulder straps (2x) (1d)

• Hip belt hook (2x) (1e)

• Baby cushion (1f)

• Harness buckle (1g)

• Sun canopy (1h)

• Pushchair release handles (4x) (1i)

• Shoulder belt hook (1j)

• Harness height adjuster (1k)

• Pushchair adapter housing (1l)

Preparing to install

Installation of the seat on the ISOﬁx base

Removal of the seat of the ISOﬁx base

Belt installation

1. Always check if the ISOﬁx indicators are green, before positioning

the seat on the base. (2)

2. Position the seat in the correct position on the base untill it clicks

with the base and the indicator at the front shows green. (3)

3. Leave the carrying handle up in the carrying position.

4. When the seat is positioned rearfacing on the back seat of the

vehicle, you should, if possible, push the front seat of the vehicle

backwards, so that it is in contact with the child seat. If it is not

possible to obtain contact with the child seat, push the back rest

of the front seat of the vehicle forward as far as possible. (4)

• The seat can be taken o by pulling the seat release handle at the

front of the base.

1. Position the seat on the vehicle seat. Make sure the carrying handle

is up in the carrying position. (5)

2. Guide the hip belt of the 3-point-belt over the blue sections under

the hip belt hooks and fasten the seat belt with a ‘click’. (6)

3. Guide the shoulder belt over the blue section through the shoulder

belt hook at the rear side of the seat shell. (7)

4. Tighten the 3-point belt by pulling the belt through the hip belt

hooks and through the shoulder belt hook until it is as tight as

possible. (8)

5. Leave the carrying handle up in carrying position.

Positioning of the child

Baby cushion

1. Check that the shoulder strap slots are level with your child’s

shoulders. (9)

2. Pull the shoulder straps up while pressing the button of the central

adjuster. (10)

3. Open the harness buckle. (11)

4. The height of the shoulder straps and the head cushion can be

adjusted by pulling the release handle upwards at the back of the

seat and pulling the handle up or down. (12)

5. Position the shoulder straps over the marking at the sides of the seat

to use the magnets to keep the harness open while you position the

child. (13)

6. When the child is positioned, place the shoulder straps over the

child’s shoulders and close the buckle: CLICK! (14)

7. Pull the harness strap through the central adjuster in the direction of

the arrow straight up/forwards. Continue pulling until the harness is

a comfortable but a ﬁrm ﬁt. (15)

8. You can protect your child against the sun by raising the sun canopy.

The baby cushion oers extra comfort for young babies. As baby grows

the thickness of the baby cushions can be adjusted.

• 0-4 m (16)

• 4-6 m (17)

• 6 m + (18)

Produktspezifikationen

Marke:	BeSafe
Kategorie:	Autositz
Modell:	iZi Go
Produktfarbe:	Grey, White
Autositzgruppe:	0+ (0 - 13 kg; 0 - 15 Monate)
anpassbare Kopfstütze:	Ja
Gurtverschlusstyp:	3-Punkt
Anzahl der Liegepositionen:	2