Bertazzoni X122 6G MFE BL Bedienungsanleitung

Bertazzoni Herde X122 6G MFE BL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bertazzoni X122 6G MFE BL (20 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
INSTALLATION, MAINTENANCE AND USE
INSTRUCTIONS FOR
FREE-STANDING COOKERS
121,9x64 cm (type MT/MTV)
X1226GMFE
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING
THE APPLIANCE.
The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation or improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription
errors, contained in this booklet. In addition, the appearance of the figures reported is also
purely indicative.
The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating characteristics.
2
CONTENTS:
INSTALLER TECHNICAL MANUAL ............................................................................................................... pg. 2
Installing the cooker - Installation information ................................................................................................. pg. 2
Ventilation and aeration of rooms .................................................................................................................... pg. 3
Height adjustable legs .................................................................................................................................... pg. 3
Backguard installation instruction ................................................................................................................... pg. 3
Gas connection ............................................................................................................................................... pg. 3
Adaptation to different types of Gas and burner adjustments.......................................................................... pg. 4
Electric connection .......................................................................................................................................... pg. 5
APPLIANCE MAINTENANCE - Replacing parts ............................................................................................. pg. 6
USE AND MAINTENANCE MANUAL ............................................................................................................. pg. 6
Description of control panel and control types ................................................................................................. pg. 7
Using burners .................................................................................................................................................. pg. 7
Using the electric griddle ................................................................................................................................. pg. 8
Using the electric thermostat ........................................................................................................................... pg. 8
Using the 9+0 switch.......................................................................................... .............................................. pg. 8
Using the thermostat with switch in series....................................................................................................... pg. 9
Using the natural conventional electric oven .................................................................................................. pg. 9
Using the ventilated electric oven .................................................................................................................... pg. 10
Positioning the oven trays & shelves ............................................................................................................... pg. 11
Using the electric grill ..................................................................................................................................... pg. 11
Using the ventilated electric grill ...................................................................................................................... pg. 11
Using the self cleaning oven .......................................................................................................................... pg. 11
Abnormal Operation ........................................................................................................................................ pg. 12
Cleaning the appliance .................................................................................................................................... pg. 12
After-sales technical service and spare parts .................................................................................................. pg. 12
THIS APPLIANCE HAS BEEN DESIGNED FOR NON-PROFESSIONAL DOMESTIC USE.
INSTALLER TECHNICAL MANUAL
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The symbol on the product indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point
for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city council office.
INSTALLER INFORMATION
The installation, all adjustments, transformations and maintenance listed in this part of the manual must be
carried out only by skilled personnel.
Improper installation may cause damage to persons, animals or property, for which the manufacture will not be
held responsible.
The appliance safety or automatic adjustment devices may be changed during the service life of the system only
by the manufacturer or by the duly authorised supplier.
INSTALLING THE COOKER
After having removed the various loose parts from the internal and external packing, make sure that the cooker is not
damaged. In case of doubt, do not use the appliance and contact skilled personnel.
Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children.
The appliance can be installed as a freestanding unit, next to a wall or inserted between two walls (Fig.1). A single
sidewall that exceeds the height of the work surface is possible. This must be at a minimum distance of 70 mm from the
edge of the cooker (Fig.1)
Any walls of the adjacent furniture pieces and the wall behind the cooker must be made with heat-resistant material that
can withstand a minimum overtemperature of 65 K.
WARNING: the connection to the gas network must only use metal flexible pipes that conform with the national
standards in force.
3
IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE
The cooker can be installed separately, as a freestanding unit, on a plinth, or between kitchen units or between a
kitchen unit and the wall.
If installing the appliance as a freestanding cooker, screw the height adjustable telescopic legs supplied to the
base of the appliance. If installing th screw the levelling feet supplied to the base of the e appliance on a plinth,
appliance.
This appliance is not connected to devices which exhaust combustion products.
Special attention must be focused on the prescriptions described below regarding room aeration and
ventilation. Any hanging cabinets installed above the work surface must be located at a distance of no less than
700 mm.
This appliance is not intended to be operated by means of an external timer or separate remote-control system.
NOT FOR USE IN MARINE CRAFT, CARAVANS OR MOBILE HOMES UNLESS EACH BURNER IS FITTED WITH
FLAME SAFEGUARD.
WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR IN CARAVANS, IT SHALL NOT BE USED AS A
SPACE HEATER.
WARNING: SERVICING SHOULD BE CARRIED OUT ONLY BY AUTHORISED PERSONNEL.
DO NOT MODIFY THIS APPLIANCE.
ROOM VENTILATION
To ensure that the appliance operate correctly, the room where it is installed must be continuously ventilated. The room
volume should not be less than 25 m³ and the quantity of air needed shall be based on the regular combustion of gas
and on the ventilation of the room. Natural air will flow through permanent openings in the walls of the room to be
ventilated: these openings will be connected with the outside environment and shall have a minimum cross-section
defined by the current national standards regarding room ventilation (see Fig. 3).
These openings shall be built so that they cannot be clogged.
Indirect ventilation is also permitted by taking air from the rooms adjacent to the one to be ventilated.
LOCATION AND AERATION
The gas cooking appliances must always evacuate the combustion products by means of hoods connected to chimneys,
flues or directly outside (see Fig. 4). If a hood cannot be installed, it is possible to use a fan installed on a window or
directly facing outdoors, to be operated together with the appliance (see Fig. 5), provided that there is strict compliance
with the ventilation regulations.
HEIGHT ADJUSTABLE LEGS (Fig.6)
Legs are packed in the top box.
Legs should be installed with the appliance being near the location of final installation, they are not secure for long
transport. After unpacking the range, raise it about a foot to insert the legs in their bases assembled on the lower part of
the cooker and lower the range gently to keep any undue strain from legs and mounting hardware. It is recommended to
use a pallet or lift jack instead of tilting the unit.
BACKGUARD INSTALLATION INSTRUCTION
1) Remove n°2 screws fixing worktop as shown in fig.7
2) Place front part of the backguard and attach it from bottom side with the two removed screws (point 2) as shown in
fig .8
3) Fix the front part of the backguard with the screws supplied with the backguard kit (fig.9)
4) Assemble back part with front part of the backguard and fix them with a screws supplied with the backguard kit
(fig.10)
APPLIANCE GAS CONNECTION
Before connecting the appliance to the gas network, make sure that the data on the label attached to the food
warmer drawer or on the back of the cooker are compatible with what is indicated for the gas distribution
network.
A label attached to the last page of this handbook and in the food warmer drawer (or on the back) of the
appliance indicates the appliance adjustment conditions: type of gas and operating pressure.
IMPORTANT: This appliance must be installed in compliance with current national standards in force and used
only in a well-ventilated room.
This appliance shall be installed only by authorised persons and in accordance with the manufacturer's
installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations,
local water supply regulations, AS/NZS 5601.1-2010-Gas Installations–General installations and any other
statutory regulations.
WARNING: It should be recalled that the appliance utilises a threaded 1/2" gas cylindrical male fitting according
to UNI-ISO 228-1.


Produktspezifikationen

Marke: Bertazzoni
Kategorie: Herde
Modell: X122 6G MFE BL
Breite: 1222 mm
Tiefe: 640 mm
Produkttyp: Freistehender Herd
Produktfarbe: Blau
Steuerung: Drehregler
Höhe: 902 mm
AC Eingangsspannung: 220 - 240 V
AC Eingangsfrequenz: 50 - 60 Hz
Eingebautes Display: Nein
Gehäusematerial: Edelstahl
Grill: Ja
Verstellbare Füße: Ja
Stromstärke: 25.65 A
Innenbeleuchtung: Ja
Kochfeldtyp: Gaskochfeld
Anzahl Herdplatten/Kochzonen: 6 Zone(n)
Anzahl der Gasbrenner: 6 Zone(n)
Leistung Kochzone 1: 1000 W
Leistung Kochzone 2: 1750 W
Leistung Kochzone 3: 3000 W
Leistung Kochzone 4: 5000 W
Steuerungsposition: Vorderseite
Anschlusswert (elektrisch): 5900 W
Anzahl der Öfen: 2
Garraumvolumen Gesamteinheit: 142 l
Leistung Gesamteinheit: - W
Netto-Ofenvolumen: 86 l
Heißluftbetrieb: Ja
Anzahl der automatischen Programme: 9
Ofenleistung: - W
Höheneinstellung: 44 mm
Art der Oberfläche: Emaillenstahl
Konventionelle Beheizung (Ober-/Unterhitze): Ja
Bruttorauminhalt Ofen: 86 l
Stromquelle Ofen: Elektro
Staufach: Ja
Anzahl der Glastür Paneele: 3
Zündsicherung: Ja
Elektrische Zündung: Ja
Pfannenunterlagenmaterial: Eisenguss
Ofen 2 Bruttorauminhalt: 56 l

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bertazzoni X122 6G MFE BL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Herde Bertazzoni

Bedienungsanleitung Herde

Neueste Bedienungsanleitung für -Kategorien-