Bertazzoni PRO1005GGVLXE Bedienungsanleitung

Bertazzoni Herde PRO1005GGVLXE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bertazzoni PRO1005GGVLXE (19 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/19
INSTALLATION, MAINTENANCE
AND USE INSTRUCTIONS FOR
FREE-STANDING COOKERS
100x60 cm GIANT OVEN
(MOD.: S4)
pag.2
NOTICE D’INSTALLATION, D’ENTRETIEN ET
MODE D’EMPLOI DE LA CUISINIERE A GAZ
10 x60cm 0
(MOD.: S4)
pag.19
3100608
2
CONTENTS
INSTALLER TECHNICAL MANUAL…………………………………………………………………………………… ..
APPLIANCE GAS CONNECTION……………………………………………………………………………………… ..
pg
3
ADAPTATION TO DIFFERENT TYPES OF GAS…………………………………………………………..................
pg
3
BURNER ADJUSTMENT…………………………………………………………………………..................................
pg
4
APPLIANCE ELECTRIC CONNECTION……………………………………………………….....………………..……
pg
4
TYPES OF POWER CORD………………………………………………………………………………………………..
pg
5
APPLIANCE MAINTENANCE……………………………………………………………………………………………..
pg
6
REPLACING PARTS…………………………………………………………………………………………….………….
pg
6
USE AND MAINTENANCE MANUAL………………………………………………………………………………..……
pg
6
CONTROL ……………………….. PANEL DESCRIPTION………………………………………………………………
pg
6
USING BURNERS…………………………………………………………………………………………………..……….
pg
6
USING HOT PLATES……………………………………………………………………………….……………………….
pg
7
USING THE CERAMIC HOB……………………………………………………………………………………………… ..
pg
8
TYPE OF PAN…………………………………………………………………………………………………………………
pg
8
USING THE INDUCTION HOB……………………………………………………………………………………………..
pg
8
HOB CONTROL KNOB………………………………………………………………………………………………………
pg
8
HOB…………………………………………………………………………………………………………………………….
pg
9
TYPES OF PANS……………………………………………………………………………………………………………..
pg
9
USING THE GAS OVEN FOR MODEL WITH DOUBLE CONTROLS………………………..………………..……….
pg
10
USING THE CHANGE OVER SWITCH ……- ………………………………………………………………………………
pg
11
USING THE ELECTRIC THERMOSTAT ( WITH A MULTIFUNCTION OVEN)……………………………………… ..
pg
11
USING THE MULTIFUNCTION OVEN …………………………………………………………………………………….
pg
11
USING THE NATURAL CONVENTIONAL ELECTRIC OVEN …………………………………………………………..
pg
13
USING THE VENTILATED ELECTRIC OVEN …………………………………………………………………………….
pg
13
USING THE GAS GRILL FOR MODEL WITH DOUBLE CONTROLS …………………………………………………
pg
13
USING THE CONVENTIONAL ELECTRIC GRILL……………………………………………....……………………… ..
pg
14
USING THE VENTILATED ELECTRIC GRILL ……………………………………………………………………………
pg
14
USING THE MINUTE-MINDER…………………………………………………………………………………………… ..
pg
14
USING THE END OF COOKING TIMER………………………………………………………………………………….
pg
14
USING THE DIGITAL CLOCK ………………………………………………………………………………………………
pg
14
USING THE TOUCH CLOCK ……………………………………………………………………………………………….
pg
15
USING THE ANALOG CLOCK…………………………………………………………………….. ………………………
pg
15
USING THE …………………………………………………………………… 3 KEYS ELECTRONIC PROGRAMMER
pg
15
ELECT …………………………………………………………………………………… RONIC TIMER PROGRAMMER
pg
17
USING THE THERMOMETER ………………………………………………………………………………………………
pg
17
USING THE SELF CLEANING OVEN………………………………………………………………- ………………………
pg
18
CLEANING THE APPLIANCE……………………………………………………………………………………………… ..
pg
18
AFTER- ………………………………. SALES TECHNICAL SERVICE AND SPARE ARTS……………………………
pg
18
3
INSTALLATION, MAINTENANCE AND USE INSTRUCTIONS FOR
FREE-STANDING COOKERS 100x60 cm GIANT OVEN
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
The manufacturer will not ible for any damage to property or to persons caused by incorrect installation or be respons
improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this booklet. In
addition, the appearance of the figures reported is also purely indicative.
The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting
the essential safety and operating characteristics.
THIS APPLIANCE HAS BEEN DESIGNED PROFESSIONAL DOMESTIC USE.FOR NON-
INSTALLER TECHNICAL MANUAL
APPLIANCE GAS CONNECTION
Before connecting the appliance to the gas network, make sure that the data on the label attached to the food warmer
drawer or on the back of the cooker are compatible with what is indicated for the gas distribution network.
A label attached to the last page of this handbook and in the food warmer drawer (or on the back) of the appliance
indicates the appliance adjustment conditions: type of gas and operating pressure.
IMPORTANT: This appliance must be installed in compliance with current national standards in force and used only in
a well-ventilated room.
WARNING: It should be recalled that the appliance utilises a threaded 1/2" gas cylindrical male fitting according to UNI-
ISO 228-1.
To connect the appliance to the gas network with a flexible rubber hose, a supplemental hose nipple fitting is needed
(see Fig. 1) which is supplied with the appliance.
ADAPTATION TO DIFFERENT TYPES OF GAS
Before performing any maintenance operation, disconnect the appliance from the gas supply and electricity network.
REPLACING THE NOZZLES TO OPERATE WITH ANOTHER TYPE OF GAS:
Follow the instructions below to change the burner nozzles on the work surface:
1) Pull out the plug from the electric outlet to avoid any type of electric contact.
2) Remove the grids from the work surface (Fig. 2).
3) Remove the burners (Fig. 2).
4) Unscrew the nozzles using a 7 mm spanner, and replace them (Fig. 3) with those needed for the new type of gas according
to what is indicated in Table 1.
Follow the instructions below to change the oven burner nozzle:
1) Remove the oven level (Fig. 4-5).
2) Loosen the screw rner from the support being careful not to damage n plug and the V and pull out the bu the ignitio
thermocouple (Fig. 6).
3) Unscrew the nozzle mm spanner and replace it with the nozzle needed for the new type of gas according R (Fig. 6) using a 7
to what is indicated in Table 2 or in Table 3.
Follow the instructions below to change the grill burner nozzle:
1) Loosen the screw at the end of the grill burner and pull out the burner from the support being careful not to damage the
ignition plug and the thermocouple (Fig. 7).
2) Unscrew the nozzle R (Fig. 7) using a 7 mm spanner and replace it with the nozzle needed for the new type of gas according
to what is indicated in Table 2 or in Table 3.
WARNING: After completing the above-mentioned replacements, the technician must adjust the burners, as described
in the paragraph below, djustment and pr seal any a e-adjustment devices and apply the label on the
appliance, to replace the existing one, corresponding to the new gas adjustment. This label is contained in
the spare nozzle bag.
Table 1
Burner
Types of gas
Nozzle diameter
Rater capacity
1/100 mm.
g/h
l/h
kW
kcal/h
Auxiliary
Natural G20
72
-
95
1
860
Butane G30
50
73
-
1
860
Propane G31
50
71
-
1
860
Semi- rapid
Natural G20
97
-
167
1,75
1505
Butane G30
65
127
-
1,75
1505
Propane G31
65
125
-
1,75
1505
Rapid
Natural G20
115
-
286
3
2580
Butane G30
85
218
-
3
2580
Propane G31
85
214
-
3
2580
Ultra rapid
Natural G20
153
-
405
4,25
3655
4 kW
Butane G30
102
309
-
4,25
3655
Propane G31
102
304
-
4,25
3655
Natural G20
ext. 155
int. 70
-
-
476
5
-
4300
Ultra rapid
Dual 5 kW
Butane G30
ext. 96
int. 46
334
-
-
4,60
3956
Propane G31
ext. 96
int. 46
328
-
-
4,60
3956


Produktspezifikationen

Marke: Bertazzoni
Kategorie: Herde
Modell: PRO1005GGVLXE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bertazzoni PRO1005GGVLXE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Herde Bertazzoni

Bedienungsanleitung Herde

Neueste Bedienungsanleitung für -Kategorien-