Bertazzoni CB36 6 00 X Bedienungsanleitung

Bertazzoni Herde CB36 6 00 X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bertazzoni CB36 6 00 X (12 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Installation, Service and User Instructions

Built-in gas cooktops

BERTAZZONI

DIMENSIONS: 36’’ (915 mm)(W) x 253/16’’ (640 mm)(D)

Models CB36500X [C3W0..U7X (2 or 5)A]

Models CB36600X [C3Y0..U7X(2 or 5)A]

IMPORTANT - PLEASE READ AND FOLLOW

-Before beginning installation, please read these instructions completely and carefully.

-Do not remove permanently affixed labels, wa may void the warranty. -Please observe alrnings, or plates from the product. This l local

and national codes and ordinances.

-Please ensure that this product is properly grounded.

-The installer should leave these instructions with the consumer who should retain for local inspector's use and for

future reference.

-The electrical plug should always be accessible.

Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSIZ223.1-latest edition. Electrical

installation must be in accordance with the National Electrical Code, ANIS/NFPA70

- latest edition and/or local codes. IN CANADA:

Installation must be in accordance with the current CAN/CGA-B149.1 National Gas Installation Code or CAN/CGA-B

149.2, Propane

Installation Code and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical

Codes Part 1 and/or local codes.

Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve must be installed in the gas

supply line ahead of the oven in the gas flow for safety and ease of service.

In Massachusetts: All gas products must be installed by a "Massachusetts" licensed plumber or gasfitter. A "T" handle type manual

gas valve must be installed in the gas supply line to this appliance.

IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

OBSERVE ALL GOVERNING CODES AND ORDINANCES.

WARNING: If the information in this manual is not followed exactly, a

fire or explosion may result causing property damage, personal injury

or death.

Do not store or use gasoline or other flammable vapors and liquids in

the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

- Do not light any appliance.

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas supplier from a neighbor’s phone. Follow

the gas supplier’s instructions.

- If you cannot reach your gas suppliers, call the fire department.

Installation and service must be performed by a qualified installer,

service agency or the gas supplier.

310496

WARNING

Read this instruction booklet before installing and using the appliance.

The manufacturer will not be responsible for any damage to property or to persons caused by incorrect

installation or improper use of the appliance.

The manufacturer reserves the right to make changes to its products when considered necessary and useful, without

affecting the essential safety and operating characteristics.

This appliance has been designed for non-professional, domestic use only.

Warning: do not use this appliance to heat a room.

Installation instructions

This appliance shall only be installed by an authorized person. This appliance shall be installed in accordance

with the manufacturer’s installation instructions, IMPORTANT: this appliance must be installed in accordance

with the norms & standards of the country where it will be installed.

The installation of this appliance must conform to local codes and ordinances. In the absence of local codes,

Installations must conforms to American National Standards, National Fuel Gas Code ANSI Z223.1 – latest

edition** or B149.1.

If local codes permit, a flexible metal appliance connection with the new AGA or CGA certified design, max. 5

feet (1,5 m) long, ½” I.D. is recommended for connecting this appliance to the gas supply line. Do not bend or

damage the flexible connector when moving the appliance. The pressure regulator has ½” female pipe thread.

The appropriate fitting must be determined based on the size of your gas supply line, the flexible metal

connector and the shutoff valve.

The appliance, when installed, must , in the absence be electrically grounded in accordance with local codes or

of local codes, with the National Electrical Code, ANSI/NFPA 70.

The appliance and its individual shutoff valve must be disconnected from the gas supply piping system any

pressure testing of that system at test pressure in excess of ½ psi (3,5 kPa).

The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve

during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5

kPa).

For use with a pressure regulator. The regulator supplied must be used with this appliance; it shall be properly

installed in order to be accessible when appliance is installed in its final location.

The gas appliance pressure regulator must be set for the gas with which the appliance is used.

This appliance can be used with Natural Gas and LP Gas. It is shipped from the factory adjusted for use with

Natural Gas: CONVERSION FIXED ORIFICES ARE LOCATED IN THE LITERATURE PACK SUPPLIED WITH THE

UNIT.

A gas nozzle kit for the change of type of gas are contained inside the package tigether with the gas

appliance installation kit and instruction booklet.

The maximum inlet gas supply pressure incoming to the gas appliance pressure regulator is 20’’ water column

(5 kPa) .

The minimum gas supply pressure for checking the regulator setting shall be at least 1“ w.c. (249 Pa) above the

inlet specified manifold pressure to the appliance (this operating pressure is 4” w.c. (1.00 kPa) for Natural Gas

and 11” w.c. (2.75 kPa) for LP Gas.

ATTENTION: A manual valve shall be installed in an accessible location in the gas line external to the appliance

for the purpose of turning on or shutting off gas to the appliance

WARNING: Do not use aerosol sprays in the vicinity of this appliance while it is in operation

Requirements

Room ventilation – Location and venting.

ATTENTION: An exhaust fan may be used with the appliance; in each case it shall be installed in conformity with

the national standards in force.

ATTENTION: Exhaust hood operation may affect other vented appliances; in each case it shall be installed in

conformity with the national standards in force.

INSTALLATION MANUAL

WORKTOP FRONTGUARD INSTALLATION INSTRUCTIONS

In order to increase the clearance between front edge of the worktop and the burners for your safety it is

recomended to install the worktop frontguard supplied with the appliance. For installation instructions follow

the instructions indicated in the following figures

Produktspezifikationen

Marke:	Bertazzoni
Kategorie:	Herde
Modell:	CB36 6 00 X
Breite:	910 mm
Tiefe:	640 mm
Produktfarbe:	Edelstahl
Steuerung:	Drehregler
Höhe:	165 mm
Eingebautes Display:	Nein
Zertifizierung:	CSA
Geräteplatzierung:	Integriert
Kochfeldtyp:	Gaskochfeld
Anzahl Herdplatten/Kochzonen:	6 Zone(n)
Anzahl der Gasbrenner:	6 Zone(n)
Typ Kochzone 1:	Regelmäßig
Kochzone 1 Form:	Rund
Position Kochzone 1:	Hinten links
Stromquelle Kochzone 1:	Gas
Leistung Kochzone 1:	1750 W
Typ Kochzone 2:	Extragroß
Kochzone 2 Form:	Rund
Position Kochzone 2:	Links vorne
Brenner/Kochzone 2 Stromquelle:	Gas
Leistung Kochzone 2:	5000 W
Typ Kochzone 3:	Regelmäßig
Kochzone 3 Form:	Rund
Position Kochzone 3:	Mitte hinten
Stromquelle Kochzone 2:	Gas
Leistung Kochzone 3:	1750 W
Typ Kochzone 4:	Regelmäßig
Kochzone 4 Form:	Rund
Position Kochzone 4:	Mitte vorn
Stromquelle Kochzone 3:	Gas
Leistung Kochzone 4:	1750 W
Einbauraum Breite:	914 mm
Einbauraum Höhe:	165 mm
Art der Oberfläche:	Edelstahl
Stromquelle Kochzone 4:	Gas
Typ Kochzone 5:	Groß
Leistung Kochzone 5:	3000 W
Zündsicherung:	Ja
Elektrische Zündung:	Ja
Pfannenunterlagenmaterial:	Eisenguss
Kochzone 5 Form:	Rund
Position Kochzone 5:	Hinten rechts
Wok-Brennerleistung:	5000 W
Wokbrenner:	Ja
Wokbrennerposition:	Links vorne
Leistung Kochzone 6:	1000 W
Stromquelle Kochzone 5:	Gas
Typ Kochzone 6:	Köcheln
Position Kochzone 6:	Vorne rechts
Kochzone 6 Form:	Rund