BenQ MP523 Bedienungsanleitung

BenQ Videopprojektor MP523

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BenQ MP523 (28 Seiten) in der Kategorie Videopprojektor. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28

EN-1

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, detectable by turning the equipment in question off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver



Connect the equipment to an outlet on a different circuit than that which the receiver

is connected to

Or consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to following

two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference that may cause undesired operation.

EN-2

Safety Instructions

Read all of these instructions before you operate your projector and save for future

reference.

1. Read instructions

All the safety and operating instructions should be read before the appliance is

operated.

2. Notes and warnings

All notes and warnings in the operating instructions should be adhered to.

3. Cleaning

Unplug the projector from the wall socket before cleaning. Use a damp cloth for

cleaning the projector housing. Do not use liquid or aerosol cleaners.

4. Accessories

Do not place this product on an unstable cart, stand, or table. The product may fall,

causing serious damage to the product.

Keep the plastic packing materials (from the projector, accessories and optional

parts) out of the reach of children as these bags may result in death by

suffocation. Be particularly careful around the small children.

5. Ventilation

The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust).

Do not block or place anything near these slots, or internal heat build-up may occur,

causing picture degradation or damage to the projector.

6. Power sources

Check that the operating voltage of your unit is identical with the voltage of your local

power supply.

7. Servicing

Do not attempt to service this projector yourself. Refer all servicing to qualified

service personnel.

8. Replacement parts

When replacement parts are required, be sure that the replacement parts are

specified by the manufacture. Unauthorized substitutions may result in fire, electric

shock or other hazards.

9. Moisture Condensation

Never operate this projector immediately after moving it from a cold location to

a warm one. When the projector is exposed to such a change in temperature,

moisture may condense on the lens and the crucial internal parts. To prevent

the unit from possible damage, do not use the projector for at least 2 hours

when there is an extreme or sudden change in temperature.

EN-3

Notes on the AC Power Cord

AC Power Cord must meet the requirement of countries where you use this projector.

Please confirm your AC plug type with the graphics below and ensure that the proper

AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,

please contact your sales dealer. This projector is equipped with a grounding type AC

line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose

of this grounding type plug. We highly recommend using a video source device also

equipped with a grounding type AC line plug to prevent signal interference due to

voltage fluctuations.

Ground

Produktspezifikationen

Marke:	BenQ
Kategorie:	Videopprojektor
Modell:	MP523
Gewicht:	2400 g
RMS-Leistung:	2 W
Anzahl eingebauter Lautsprecher:	1
Stromverbrauch (Standardbetrieb):	240 W
Plug & Play:	Ja
Geräuschpegel:	33 dB
Energiebedarf:	90 - 240 VAC, 50 - 60 Hz
Analoges Signalformatsystem:	NTSC, PAL, SECAM
Composite Video-Eingang:	1
Komponenteneingang Video (YPbPr/YCbCr):	1
Abmessungen (BxTxH):	108 x 215 x 273 mm
Projektorhelligkeit:	2000 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	XGA (1024x768)
Anzahl der Farben:	16,78 Millionen Farben
Projektionsflächenkapazität:	300 "
Anzahl VGA (D-Sub) Anschlüsse:	2
Seitenverhältnis:	4:3, 16:9
Audioanschlüsse:	1
Lebensdauer der Lichtquelle:	3500 h
Lampenleistung:	180 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	21.95 - 24.18 mm
Anzahl S-Video-Eingänge:	1
Vertikaler Scanbereich:	50 - 85 Hz
Horizontaler Scanbereich:	31 - 79 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus):	4000 h
Projektionsverhältnis:	1.97 - 2.16:1
Audioausgang:	1