Behringer DI400P Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Behringer DI400P (21 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
ULTRA-DI DI400P
Thank you for showing condence in Behringer products by
purchasing the ULTRA-DI DI400P. The DI400P is a high-performance
passive direct injection box.
â—Š
â—Š
â—Š
â—Š â—Š Please read the safety instructions that appear at the
end of this document.
Being on stage or in the studio, musicians often look for ways to
connect certain signal sources directly to the mixing console. Even
though this approach has obvious advantages, there are still some
technical hurdles obstructing its implementation. For example,
keyboards seldom feature balanced outputs, and guitars can not be
directly connected to mixing consoles because of the high impedance
of guitar signals.
The DI400P lets you directly tap into a high-impedance, unbalanced
signal—for example, the signal between a guitar and a guitar amp.
From there on, you can feed the signal directly to a mixing console.
V 1.0
2ULTRA-DI DI400P
1. Control Elements and Connections
Fig. 1: Top view
(1) + (2) PARALLEL IN/OUT (ÂĽ" TS): These connectors are used for
connecting unbalanced signal sources. Because both connectors are
wired in parallel, they can be used both as an input and as a direct
output to loop the signal through to a monitor amplier.
(3) OUTPUT (XLR): This is the balanced mic-level output. Use a high-
quality balanced microphone cable to establish connection.
(4) Using the (ground lift) switch, youcan fully separate GND LIFT
input and output grounding. Depending on how the equipment
to which your DI400P is connected is grounded, using the GND
LIFT switch lets you lower hum noise or ground loops. When
the GNDLIFT switch is in LIFT position, the ground connection is
interrupted.
The of the DI400P is located at the bottom.SERIAL NUMBER
(1)
(3)
(2)
(4)
2. Connecting an In
ULTRA-DI DI400P
4ULTRA-DI DI400P
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TCElectronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone, AstonMicrophones, Aston Microphones and Coolaudio are trademarks
or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2021 All rights reserved.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Install in accordance with the manufacturer’s instructions.
8) Only use attachments/accessories specified by the manufacturer.
9) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way.
Important Safety
Instructions


Produktspezifikationen

Marke: Behringer
Kategorie: Schalten
Modell: DI400P

Brauchst du Hilfe?

Wenn Sie Hilfe mit Behringer DI400P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Behringer

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung fĂĽr -Kategorien-