BeamZ Skytec 151.725 Bedienungsanleitung
BeamZ
Effektmaschine
Skytec 151.725
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r BeamZ Skytec 151.725 (16 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war fĆ¼r 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
DISCO SET I II
151.725 / 151.727
Instruction Manual
Gebruiksaanwijzing
Mode dāEmploi
Gebrauchsanleitung
Brugsanvisning
GB
GENERAL SAFETY RECOMMENDATIONS
- Please read this manual prior to using the unit.
- Keep the manual for further reference.
- Keep the original packaging to ensure safe transport of the unit.
- For indoor use only in dry premises.
- Ensure that there is sufļ¬cient cooling around the unit.
- Do not use the unit near heat sources or in direct sunlight.
- If the plug or mains lead are damaged, they need to be repaired by a qualiļ¬ed technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
- mains outlet.
- Make sure that no small objects or liquids enter the housing.
- Clean the unit only with a damp cloth. Do not use detergents or solvents!
- Other than those speciļ¬ed in the manual, . the unit doesnāt contain any user serviceable parts
- Repairs should only be carried out by an authorized SkyTronic repair service.
- FIRE HAZARD: install the mirror ball and motor at least 0.5m away from inļ¬ammable materials
(e.g. decoration objects, etc.)
- DANGER: Prior to first using the mirror ball motor combination, the installation must be check āed
by a specialist.
- The mounted units need to be checked regularly and at least once a year by a specialist.
- Regularly check the chain between the motor and the mirror ball including the anchorage points in
the motor and the ball.
- Use strong materials for the mounting of the motor.
General Description
The complete Disco lighting set includes:
- Mirror ball (20cm for the set ref. no. 151.725 30cm for the set ref. no.151.727) ,
- Mirror ball motor
- PAR36 spot light with colour wheel
MIRROR BALL MOTOR
INSTALLATION:
NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball.
A falling mirror ball can cause serious injuries!!
- The installation must be done in such a way that it can support 10 times the weight of the
mirror ball for at least 1 hour without showing any distortion.
- The motor needs to be installed perfectly horizontally. Check the position with a level. The
battery-powered version can be hung vertically.
- Motor and mirror ball must be installed out of the reach of persons.
- Use all screw openings in the housing.
- Use a chain of suļ¬cient strength for the installation of the mirror ball below the motor. The
supplied chains are made to the load of the motor.
- Connect the assembly to an earthed wall outlet.
MIRROR BALL
INSTALLATION IN PRIVATE PREMISES
- WARNING: A falling mirror ball can cause serious injuries!
- A mirror ball is meant to create decorative light eļ¬ects in combination with an appropriate light
source.
- ATTENTION!! Mirror balls need to be installed by a professional according to the European
standard EN60598.
- The installation that supports the mirror ball (including the motor) needs to be able to carry
during 1 hour 5 times the weight of the mirror ball without showing visible distortion.
- Use a chain of suļ¬cient strength to link the motor to the mirror ball. Do not use steel cable
that might fray due to the torsion.
- Big mirror balls need to be secured by a safety net.
- The mounted motor and mirror ball assembly needs to be checked regularly, and at least once
a year by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on
the motor and the ball.
INSTALLATION IN PUBLIC PREMISES
- WARNING: Mirror balls need to be installed according to the European standard EN60598-2-7
and the standards which are applicable in the different countries. The installation might only
be done by a professional installer!
- The installation that supports the mirror ball (including the motor) needs to be able to carry
during 1 hour 10 times the weight of the mirror ball without showing visible distortion.
- The installation needs to be secured by a safety net so that no parts can fall down.
- IMPORTANT! THE INSTALLATION OF LIGHT EFFECTS REQUIRES EXPERIENCE and
knowledge of load calculations, installation materials, periodic safety checks, etc. Leave the
installation to a professional if you donāt have the required knowledge and experience. A
wrong installation might cause serious injuries and material damages.
- Use a chain of suļ¬cient strength for the link between the motor and the mirror ball. Do not use
steel cable that can fray under the torsion.
- DANGER: Prior to the ļ¬rst use of the motor and mirror ball assembly, the installation needs to
be checked by a professional.
- The motor and mirror ball assembly needs to be checked regularly by a professional.
- Check regularly the chain between the motor and the mirror ball, including the ļ¬xing points on
the motor and the mirror ball.
PAR36 SPOT WITH COLOUR WHEEL
Installing/replacing the lamps
Before replacing the lamp, unplug mains lead and let the lamp cool down. Please follow the lamp
manufacturerās notes when installing.
- You need one 6V 30W Par 36 Lamp for installation.
- Please remove the fixation ring by pressing it together.
- If replacing the lamp, remove the old lamp from the pin s and loosen the wires. pot
- Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver.
- Connect the wires with the lamp using an appropriate screwdriver.
- Tighten the screws.
- Insert the lamp in the housing.
- Fix the lamp with the fixation ring.
Produktspezifikationen
| Marke: | BeamZ |
| Kategorie: | Effektmaschine |
| Modell: | Skytec 151.725 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeamZ Skytec 151.725 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine BeamZ
8 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
18 September 2024
17 September 2024
15 September 2024
13 September 2024
13 September 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine Kƶnig
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
10 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
25 September 2024
24 September 2024
17 September 2024
16 September 2024
14 September 2024
8 September 2024