BeamZ Disco Set 151.250 Bedienungsanleitung

BeamZ Effektmaschine Disco Set 151.250

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeamZ Disco Set 151.250 (12 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
DISCO SET
151.250
Instruction Manual
Gebruiksaanwijzing
Gebrauchsanleitung
GB
GENERAL SAFETY RECOMMENDATIONS
- Please read this manual prior to using the unit.
- Keep the manual for further reference.
- Keep the original packaging to ensure safe transport of the unit.
- For indoor use only in dry premises.
- Ensure that there is sufficient cooling around the unit.
- Do not use the unit near heat sources or in direct sunlight.
- If the plug or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Make sure that no small objects or liquids enter the housing.
- Clean the unit only with a damp cloth. Do not use detergents or solvents!
- Other than those specified in the manual, . the unit doesn’t contain any user serviceable parts
- Repairs should only be carried out by an authorized Tronios repair service.
- FIRE HAZARD: install the mirror ball and motor at least 0.5m away from inflammable materials (e.g.
decoration objects, etc.)
- DANGER: Prior to first using the mirror ball motor combination, the installation must be check by a ed
specialist.
- The mounted units need to be checked regularly and at least once a year by a specialist.
- Regularly check the chain between the motor and the mirror ball including the anchorage points in the
motor and the ball.
- Use strong materials for the mounting of the motor.
- AVOID DIRECT EYE EXPOSURE, especially applicable to persons with photo sensitive disorders eg.
Epilepsy.
General Description
The complete Disco lighting set includes:
- Mirror ball 20cm
- Mirror ball motor
- PAR36 spot light with colour wheel
- Flash light
MIRROR BALL MOTOR
INSTALLATION:
NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball. A
falling mirror ball can cause serious injuries!!
- The installation must be done in such a way that it can support 10 times the weight of the mirror ball
for at least 1 hour without showing any distortion.
- The motor needs to be installed perfectly horizontally. Check the position with a level. The battery-
powered version can be hung vertically.
- Motor and mirror ball must be installed out of the reach of persons.
- Use all screw openings in the housing.
- Use a chain of sufficient strength for the installation of the mirror ball below the motor. The supplied
chains are made to the load of the motor.
- Connect the assembly to an earthed wall outlet.
MIRROR BALL
INSTALLATION IN PRIVATE PREMISES
- WARNING: A falling mirror ball can cause serious injuries!
- A mirror ball is meant to create decorative light effects in combination with an appropriate light
source.
- ATTENTION!! Mirror balls need to be installed by a professional according to the European standard
EN60598.
- The installation that supports the mirror ball (including the motor) needs to be able to carry during 1
hour 5 times the weight of the mirror ball without showing visible distortion.
- Use a chain of sufficient strength to link the motor to the mirror ball. Do not use steel cable that might
fray due to the torsion.
- Big mirror balls need to be secured by a safety net.
- The mounted motor and mirror ball assembly needs to be checked regularly, and at least once a
year by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on the
motor and the ball.
INSTALLATION IN PUBLIC PREMISES
- WARNING: Mirror balls need to be installed according to the European standard EN60598-2-7 and
the standards which are applicable in the different countries. The installation might only be done by a
professional installer!
- The installation that supports the mirror ball (including the motor) needs to be able to carry during 1
hour 10 times the weight of the mirror ball without showing visible distortion.
- The installation needs to be secured by a safety net so that no parts can fall down.
- IMPORTANT! THE INSTALLATION OF LIGHT EFFECTS REQUIRES EXPERIENCE and
knowledge of load calculations, installation materials, periodic safety checks, etc. Leave the
installation to a professional if you don’t have the required knowledge and experience. A wrong
installation might cause serious injuries and material damages.
- Use a chain of sufficient strength for the link between the motor and the mirror ball. Do not use steel
cable that can fray under the torsion.
- DANGER: Prior to therst use of the motor and mirror ball assembly, the installation needs to be
checked by a professional.
- The motor and mirror ball assembly needs to be checked regularly by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on the
motor and the mirror ball.
PAR36 SPOT WITH COLOUR WHEEL
Installing/replacing the lamps
Before replacing the lamp, unplug mains lead and let the lamp cool down. Please follow the lamp
manufacturer’s notes when installing.
- You need one 6V 30W Par 36 Lamp for installation.
- Please remove the fixation ring by pressing it together.
- If replacing the lamp, remove the old lamp from th pin spot and loosen the wires. e
- Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver.
- Connect the wires with the lamp using an appropriate screwdriver.
- Tighten the screws.
- Insert the lamp in the housing.
- Fix the lamp with the fixation ring.
Mounting the Colour Wheel
- Unscrew the nut and the first tooth ring from the fixation axle of the colour wheel motor.
- Remove the foil of the colour wheel.
- Slip the colour wheel onto the fixation axle of the motor
- Slip the tooth ring first and then the nut onto the fixation axle.
- Fasten the nut without damaging the colour wheel.
- Fix the colour wheel with motor via the fixation on the motor to the pin spot housing and tighten the
screw.


Produktspezifikationen

Marke: BeamZ
Kategorie: Effektmaschine
Modell: Disco Set 151.250

Brauchst du Hilfe?

Wenn Sie Hilfe mit BeamZ Disco Set 151.250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Effektmaschine BeamZ

Bedienungsanleitung Effektmaschine

Neueste Bedienungsanleitung für -Kategorien-