BeamZ Rage 1000LED Bedienungsanleitung
BeamZ
Effektmaschine
Rage 1000LED
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr BeamZ Rage 1000LED (28 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war fĂźr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
Rage 1000 / 1500 / 1800 Smokemachine
Ref. nr.: 160.7 ; 160.7 ; 160.7 12 15 18
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSĹUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to
beneît fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid îre and/or electrical shock. Repairs must only be carried out by a qualiîed technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the îrst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore, do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- the plug and/or the mains lead are damaged, they If
need to be replaced by a qualiîed technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer.
Do NOT connect the product to a rheostat or dimmer.
- To avoid îre and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualiîed technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
eîect at least 50cm away from inîammable material and
leave at least 1-meter space on every side to ensure
suîcient cooling.
- This product contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.
- not repeatedly switch the product on and oî. This Do
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualiîed technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product oî prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suîcient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic
attacks should be aware of the eîects that this light eîect may have on them.
The product has been certiîed CE. It is prohibited to make any changes to the product. They would invalidate the CE certiîcate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The speciîcations are typical. The actual values can slightly change from one unit to the other.
Speciîcations can be changed without prior notice.
prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature îuctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched oî until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than speciîed, the light eîect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or îre.
INSTALLATION
Attention:
⢠When smoke machine has a built-in îuid tank, then should be transport and operated in an upright position.
⢠Use only Beamz water-based îuid recommended by your dealer. Poor liquid caused permanent damage, bad eîect,
clogging, spitting of unevaporated liquid etc.
⢠Be sure that the smoke machine is positioned on a stable, non-slip surface.
⢠Be sure that no ventilation slots on the productâs housing are blocked.
⢠Donât put any objects on the smoke machine.
⢠Always install the smoke machine in an area with adequate ventilation.
⢠Never connect the smoke machine to a dimmer or rheostat.
⢠In the event of a serious operating problem, stop using the product immediately.
⢠When mounted at height, use the bracket and use add a safety cable.
⢠The installation of the smoke machine has to be built and constructed in a way that it can hold 10 times the weight for 1
hour without any harming deformation.
⢠The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
⢠Never aim the smoke at yourself, people or animals.
⢠Never aim the output nozzle directly at people or at open îames.
⢠The smoke machine has to be installed out of the reach of people and animals .
⢠Drain the tank before transporting or storing the product.
⢠Never drink smoke îuid or use it on the inside or outside of a human body. If îuid gets in contact with skin or eyes,
rinse thoroughly with water and call a doctor immediately!
⢠Keep out of the reach of children.
⢠For indoor use only.
CAUTION: Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
CAUTION: When installing the smoke machine, make sure there is no highly
in inîammable material (decoration articles, etc.) in between a
distance of min. 20in 0.5 meter. ch or
Produktspezifikationen
| Marke: | BeamZ |
| Kategorie: | Effektmaschine |
| Modell: | Rage 1000LED |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeamZ Rage 1000LED benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine BeamZ
8 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
18 September 2024
17 September 2024
15 September 2024
13 September 2024
13 September 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine KĂśnig
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung fĂźr -Kategorien-
10 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
25 September 2024
24 September 2024
17 September 2024
16 September 2024
14 September 2024
8 September 2024