BeamZ Pandora 600 Bedienungsanleitung
BeamZ
Laserpointer
Pandora 600
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeamZ Pandora 600 (44 Seiten) in der Kategorie Laserpointer. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/44
Pandora Series
Ref. nr.: 152.518 / 152.521 / 152.524
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to benefit
fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid
fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the
manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore, do NOT
open the housing.
- Do not place metal objects or pour liquids into the product.
This may cause electrical shock and malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating surface.
Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to
be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer. Do
NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the product
to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- If the product has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the product
in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make sure
nobody stands in the mounting area. Mount the effect at
least 50cm away from inflammable material and leave at
least 1-meter space on every side to ensure sufficient
cooling.
- This product contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior to
moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use for
damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains voltage
of the country is suitable for this product.
- Keep the original packing material so that you can transport
the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of inappropriate use or disrespect accidents or damages caused by of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnin
g
s. This is also applicable to all dama
g
es in whatever form.
Produktspezifikationen
| Marke: | BeamZ |
| Kategorie: | Laserpointer |
| Modell: | Pandora 600 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeamZ Pandora 600 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laserpointer BeamZ
27 Juli 2024
27 Juli 2024
27 Juli 2024
3 Juni 2023
Bedienungsanleitung Laserpointer
- Laserpointer Da-Lite
- Laserpointer Connect IT
- Laserpointer Hama
- Laserpointer Kensington
- Laserpointer Nedis
- Laserpointer SilverCrest
- Laserpointer Makita
- Laserpointer Bosch
- Laserpointer Laserliner
- Laserpointer Parkside
- Laserpointer Velleman
- Laserpointer Black And Decker
- Laserpointer Cocraft
- Laserpointer Ryobi
- Laserpointer Skil
- Laserpointer Hilti
- Laserpointer DeWalt
- Laserpointer Kaiser
- Laserpointer Tacklife
- Laserpointer Stairville
- Laserpointer Stanley
- Laserpointer Bushnell
- Laserpointer United Office
- Laserpointer Led Lenser
- Laserpointer Nikon
- Laserpointer Carson
- Laserpointer Leica
- Laserpointer Eurolite
- Laserpointer Milwaukee
- Laserpointer Toolcraft
- Laserpointer Melinera
- Laserpointer GPO
- Laserpointer Powerplus
- Laserpointer Vortex
- Laserpointer Cameo
- Laserpointer Speed-Link
- Laserpointer Stabila
- Laserpointer ADA
- Laserpointer Sola
- Laserpointer Steren
- Laserpointer Uni-T
- Laserpointer Laserworld
- Laserpointer Kreator
- Laserpointer Perfect Choice
- Laserpointer Klip Xtreme
- Laserpointer Meopta
- Laserpointer Prexiso
- Laserpointer Picotronic
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
30 September 2024
24 September 2024
15 September 2024
12 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024