BeamZ Multi Acis III 153.670 Bedienungsanleitung
BeamZ
Effektmaschine
Multi Acis III 153.670
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r BeamZ Multi Acis III 153.670 (28 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war fĆ¼r 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
Multi Acis III LED Laser Effect
Ref. nr.: 153.670
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
NOTICE DāUTILISATION
V1.3
ENGLISH
Congratulations to the purchase of this Beamz light eļ¬ect. Please read this manual thoroughly prior to using the unit in order to
beneļ¬t fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid ļ¬re and/or electrical shock. Repairs must only be carried out by a qualiļ¬ed technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a specialist.
When the unit is switched on for the ļ¬rst time, some smell
may occur. This is normal and will disappear after a while.
- The unit contains voltage carrying parts. Therefore do NOT
open the housing.
- Do not place metal objects or pour liquids into the unit This
may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators,
etc. Do not place the unit on a vibrating surface. Do not
cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always pull
the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need
to be replaced by a qualiļ¬ed technician.
- If the unit is damaged to such an extent that internal parts
are visible, do NOT plug the unit into a mains outlet and
DO NOT switch the unit on. Contact your dealer. Do NOT
connect the unit to a rheostat or dimmer.
- To avoid ļ¬re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualiļ¬ed technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make sure
nobody stands in the mounting area. Mount the eļ¬ect at
least 50cm away from inļ¬ammable material and leave at
least 1 meter space on every side to ensure suļ¬cient
cooling.
- This unit contains high intensity LEDs. Do not look into the
LED light to prevent damage to your eyes.
- Do not repeatedly switch the ļ¬xture on and oļ¬. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a qualiļ¬ed
technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- ep away from electronic equipment that may cause Ke
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit oļ¬ prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior
to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is -240Vac/50Hz. Check if power 220
outlet match. If you trav , make sure that the mains el
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can transport
the unit in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suļ¬cient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the eļ¬ects that this light eļ¬ect may have on them.
The unit has been certiļ¬ed CE. It is prohibited to make any changes to the unit. They would invalidate the CE certiļ¬cate and their
guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5Ā°C/ Ā°F 41 and
35 95Ā°C/ Ā°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed.
Pls note! The use in France is only allowed to the professional user and not to the enduser. See decision:
www.legifrance.gouv.fr
LASERSAFETY
Caution
ļ· Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light..
ļ· This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
ļ· It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could
get direct laser beams or bright reļ¬ections into their eyes.
ļ· It is an oļ¬ense to shine any laser at aircraft.
ļ· There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In
the unlikely event your unit may require service, please contact your dealer. .
ļ· Use of controls or adjustments or performance of procedures other than those speciļ¬ed herein may result in
hazardous radiation exposure.
STOP AND READ ALL LASER SAFETY DATA
Laser Light is diļ¬erent from any other light source with which you may be familiar. The light from this
product can potentially cause eye injury if not set up and used properly. Laser light is thousands of times
more concentrated than light from any other kind of light source. This concentration of light power can
cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye).
Even if you cannot feel āheatā from a laser beam, it can still potentially injure or blind you or your audience.
Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye
injuries can happen quicker than you can blink.
It is incorrect to think that because these laser entertainment products split the laser into hundreds of beams or laser beam is
scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser product uses dozens of mini Watts
of laser power (Class 3B levels internally). Many of the individual beams are potentially hazardous to the eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams always
move. Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. In the laser safety
regulation, it is not legal to aim Class 3B lasers in areas which people can get exposed. This is true even if it is aimed below
peopleās faces, such as on a dance floor.
ā¢ Do not operate laser without ļ¬rst reading and understanding all safety and technical data in this manual
ā¢ Always set up and install all laser eļ¬ects so that all laser light is at least 3 meters (9.8 feet) above the ļ¬oor on which
people can stand. See section later in this manual
ā¢ After set up, and prior to public use test laser to ensure proper function. Do not use if any defect is detected. Do not
use if laser emits only one or two laser beams rather than dozens/hundreds, as this could indicate damage to the
diļ¬raction grating optic, and could allow emission of higher laser levels.
ā¢ Do not point lasers at people or animals.
ā¢ Never look into the laser aperture or laser beams
ā¢ Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.
ā¢ Do not point lasers at highly reļ¬ective surfaces such as windows, mirrors and shiny metal. Even laser reļ¬ections can
be hazardous.
ā¢ Never point a laser at aircraft, this is a federal oļ¬ense
ā¢ Never point un-terminated laser beams into the sky
ā¢ Do not expose the output optic (aperture) to cleaning chemicals
ā¢ Do not use laser if the laser appears to be emitting only one or two beams
ā¢ Do not use laser if housing is damaged or open, or if optics appear damaged in any way.
ā¢ Never open the laser housing. The high laser power levels inside of the protective housing can start ļ¬res, burn skin and
will cause instant eye injury.
ā¢ Never leave this device running unattended.
ā¢ The operation of a class 3B laser is only allowed if the show is controlled by a skilled and well-trained operator familiar
with the data included in this manual.
ā¢ The legal requirements for using laser entertainment products vary from country to country. The user is responsible for
the legal requirements at the location/country of use.
ā¢ Always use appropriate lighting safety cables when hanging lights and effects overhead.
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard āFor Safe Use of
Potential laser injury hazard exists with this product! Read these instructions carefully,
which includes important information about installation, safe e and service! us
Produktspezifikationen
| Marke: | BeamZ |
| Kategorie: | Effektmaschine |
| Modell: | Multi Acis III 153.670 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeamZ Multi Acis III 153.670 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine BeamZ
8 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
18 September 2024
17 September 2024
15 September 2024
13 September 2024
13 September 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine Kƶnig
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
10 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
25 September 2024
24 September 2024
17 September 2024
16 September 2024
14 September 2024
8 September 2024