BeamZ BWA410 Bedienungsanleitung
BeamZ
Effect machine
BWA410
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeamZ BWA410 (24 Seiten) in der Kategorie Effect machine. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/beamz/bwa410/html/bg1.png)
BWA410 Aluminium LED PAR
Ref. nr.: 150.758
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/beamz/bwa410/html/bg2.png)
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to benefit
fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid
fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the
manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do NOT
open the housing.
- Do not place metal objects or pour liquids into the product.
This may cause electrical shock and malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating surface.
Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to
be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer. Do
NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the product
to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fus e.
- During a thunderstorm or if the product will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- If the product has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make sure
nobody stands in the mounting area. Mount the effect at
least 50cm away from inflammable material and leave at
least 1 meter space on every side to ensure sufficient
cooling.
- This product contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior to
moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use for
damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains voltage
of the country is suitable for this product.
- Keep the original packing material so that you can transport
the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ and 41°F
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/beamz/bwa410/html/bg3.png)
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
IP 65
This device is protected against dirt and spray water (IP65) and thus is intended for professional applications outdoors.
WARNING: This unit is not intended for underwater use! Use only the original cables both for power supply and for the signal
connections. Make certain that the screw connections of the cable plugs are intact and always closed firmly and that there are
no foreign bodies such as dust or dirt in the threads.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
INSTALLATION
Attention:
• The installation of the product has to be built and constructed in a way that it can hold 10 times the weight for 1 hour
without any harming deformation.
• The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This
secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.
• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert
before taking into operation for the first time and after changes before taking into operation another time.
• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
• The fixture should be installed in the position where persons cannot reach and where persons may walk by or be
seated.
CAUTION: Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
CAUTION: When installing the device, make sure there is no highly in
inflammable material (decoration articles, etc.) in between a
distance of min 20inch / 0.5 meter.
Produktspezifikationen
Marke: | BeamZ |
Kategorie: | Effect machine |
Modell: | BWA410 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit BeamZ BWA410 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effect machine BeamZ
![BeamZ](/images/pdf_free.png)
6 September 2024
![BeamZ](/images/pdf_free.png)
13 August 2024
![BeamZ](/images/pdf_free.png)
13 August 2024
![BeamZ](/images/pdf_free.png)
11 August 2024
![BeamZ](/images/pdf_free.png)
10 August 2024
![BeamZ](/images/pdf_free.png)
10 August 2024
![BeamZ](/images/pdf_free.png)
10 August 2024
![BeamZ](/images/pdf_free.png)
1 August 2024
![BeamZ](/images/pdf_free.png)
1 August 2024
Bedienungsanleitung Effect machine
- Effect machine Velleman
- Effect machine König
- Effect machine Antari
- Effect machine Stairville
- Effect machine American DJ
- Effect machine Adj
- Effect machine Behringer
- Effect machine Eurolite
- Effect machine Monoprice
- Effect machine Lexicon
- Effect machine HQ
- Effect machine Viking
- Effect machine Elation
- Effect machine Cameo
- Effect machine HQ Power
- Effect machine Qtx
- Effect machine Midas
- Effect machine Martin
- Effect machine Fun Generation
- Effect machine Futurelight
- Effect machine Hazebase
- Effect machine Doepfer
- Effect machine Chauvet
- Effect machine Laserworld
- Effect machine Klark Teknik
- Effect machine Sagitter
- Effect machine The Confetti Maker
- Effect machine ColorKey
- Effect machine Lotronic
- Effect machine Valcom
- Effect machine IGS Audio
- Effect machine Magmatic
Neueste Bedienungsanleitung für -Kategorien-
![Valcom](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Magmatic](/images/pdf_free.png)
6 September 2024
![Antari](/images/pdf_free.png)
6 September 2024
![Monoprice](/images/pdf_free.png)
30 August 2024