Barox PC-INJ-30W-B Bedienungsanleitung

Barox Netzwerkkarte / Adapter PC-INJ-30W-B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Barox PC-INJ-30W-B (8 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

User Manual

Industrial Injector

PC-INJ-30W

PC-INJ-30W-B

PC-INJ-60W

PC-INJ-60W-B

PC-INJ- -B95

Version 11.2019

Introduction

This rugged designed industrial PoE injector is equipped with a 30W/60W/95W PSE port. This

PSE port can be powered by 48-56 VDC input voltage. With its multi-purpose design, it can also

be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance,

traffic monitoring and security applications in critical environments. It can tolerate -40°C to 75°C

in harsh environments to perform a reliable network. This product has been rigorously tested in

harsh environments for your security, transportation, and telco applications.

Note

Always make sure the total length of the TX cable DOES NOT exceed 100 meters. Total length

is defined as length A + length B.

Length A + Length B < 100 meters

POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100

meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more

reliable the network will be. When connecting to a poor-quality PD, it cannot generate a strong

enough signal for the remote switch. Always make sure you have a high-quality PD to perform

your desired network.

Remote Switch

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and -mount brackets are wall

included.

Power connection

This unit provides a 4 pin terminal block. It can be operated using 48-56VDC power source.

Always make sure your input voltage is within this supported voltage range.

To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,

+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a

neutral wire to the ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

Power connecting procedure:

STEP 1 – Take out 4 pin terminal block located in

the included mounting kit package.

STEP 2 – Connect power wires to +V1- or +V2-

with corresponding polarity. Connect the

grounding wire to the ground screw.

STEP 3 – Plug into terminal block socket shown

above. Polarity needs to match V+ and V-.

WARNING Always SHUT OFF power source to connect power wire.--

WARNING Any exceeded input voltage will not make this unit function and may --

damage this unit.

+V1- +V2-

Produktspezifikationen

Marke:	Barox
Kategorie:	Netzwerkkarte / Adapter
Modell:	PC-INJ-30W-B
Breite:	32 mm
Tiefe:	82 mm
Produktfarbe:	Schwarz
Höhe:	104 mm
Energieschutzeigenschaften:	Überlastschutz
Betriebstemperatur:	-40 - 75 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Zertifizierung:	FCC, IP30
Stromverbrauch (Standardbetrieb):	2 W
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Rack-Einbau:	Nein
Anzahl enthaltener Produkte:	1 Stück(e)
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Ausgangsleistung:	60 W
Nachhaltigkeitszertifikate:	CE
Sicherheit:	UL 60950-1, IEC EN60950-1
unterstütze Kabeltypen:	Cat5e, Cat6, Cat7
Konformität mit Industriestandards:	EN55022/24\nEN50155\nEN50121-3-2\nEN50121-4\nEN55011\nEN60950-1\nEN50155 / EN60068-2-6\nEN50155 / EN60068-2-27\nEN50155 / EN600-2-32
Elektromagnetische Verträglichkeit:	CE, FCC, VCCI
RJ-45-Eingangsanschlüsse:	1
RJ-45-Ausgangsanschlüsse:	1
Pin-Zuordnung & Polarität:	Mode A: Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+), Mode B: Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)