Bang And Olufsen BeoLab 12 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bang And Olufsen BeoLab 12 (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
BeoLab12
BeoLab121
For the US-market only!
NOTE: This equipment has been
tested and found to comply with
the limits for a class B digital
device, pursuant to part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harm ful
interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there
is no guarantee that interference
will not occur in a particular
installation. If this equipment does
cause harmful interference to
radio or television reception, which
can be determined by turning the
equip ment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Consult the retailer or an
experienced radio/TV technician
for help.
This device complies with part 15
of the FCC rules. Operation is
subject to the following two
conditions: (1) This device may not
cause harmful interference, and (2)
this device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modications not
expressly approved by the party
responsible for compliance could
void the user’s authority to
operate the equipment.
For the Canadian market only!
This Class B digital apparatus
complies with Canadian ICES-003.
WARNING: To reduce the risk
of fire or electric shock, do not
expose this appliance to rain or
moisture. Do not expose this
equip ment to dripping or
splashing and ensure that no
objects filled with liquids, such
as vases, are placed on the
equipment.
The product can only be
switched off completely by
disconnecting it from the
mains socket. The mains socket
must always be accessible.
The lightning flash with
arrowhead symbol within
an equilateral triangle, is
intended to alert the user to the
presence of un insulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence of important
operating and main tenance
(servicing) instructions in the
literature accompanying the product.
Technical specications, features
and the use thereof are subject to
change without notice.
3511153 Version 1.0 1206
Daily use
When you have nished setting
up the loudspeakers as described
on the following pages,
connect the entire system to
the mains supply. When in
standby, the indicator light is
switched off. The loudspeakers
are designed to be left in
standby mode when not in use.
Switching on and off –
indicator light
When you switch on your Bang&
Olufsen system, the loudspeakers
switch on simultaneously. The
indicator light turns green,
indicating that the loudspeakers are
switched on. After some time, the
indicator light will fade down.
When you switch off your system,
the red indicator light appears
briey, indicating that the
loudspeakers are not in use.
Loudspeaker protection
If an active speaker unit becomes
over heated, the affected
loudspeaker will instantly reduce
the sound level. Once the situation
has stabilised, the sound level is
slowly returned to normal.
If the indicator light is solid orange,
turn down the volume or allow
your loudspeakers to cool off.
If your loudspeakers detect a fault,
an orange indicator light will ash
until your loudspeakers are
disconnected from the mains supply.
Should the problem persist, contact
your Bang& Olufsen retailer.
Cleaning the loudspeakers
Clean the loudspeaker surfaces
using a dry, soft cloth. If necessary,
remove stains or dirt with a soft,
damp cloth and a solution of water
and mild detergent such as
washing-up liquid.
The speaker cloth may be cleaned
with a vacuum cleaner with a
brush nozzle, and set to the lowest
suction level.
Never use alcohol or other solvents
to clean any part of the
loudspeakers!
3
Indicator
NOTE! Prolonged listening at high
volume levels may cause hearing
damages.


Produktspezifikationen

Marke: Bang And Olufsen
Kategorie: Lautsprecher
Modell: BeoLab 12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bang And Olufsen BeoLab 12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Bang And Olufsen

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-