Balance 972423 Radio-Controlled Projection Clock Bedienungsanleitung

Balance Wecker 972423 Radio-Controlled Projection Clock

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Balance 972423 Radio-Controlled Projection Clock (5 Seiten) in der Kategorie Wecker. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

Item 972423

Radio-Controlled Projection Clock with Indoor Temperature Owner’s Manual

Thank you for purchasing the new generation of projection clock. Designed and engineered with the

state-of-art technology and components, this instrument will provide accurate and reliable

radio-controlled time and indoor temperature readings as well as color light bar and projection

features. Read this manual carefully to fully explore the features and functions of the new product.

Name and Functions of Buttons:

Press Functions Hold 3 seconds

SET/ Search for Radio-Controlled time Set Clock & Calendar

ALARM Read alarm time for alarm 1 & 2 Alarm time setting

ALARM Enable/Disable alarm 1 & 2

 UP 1 step forward in setting Fast advance in setting

 Down 1 step backward in setting Fast backward in setting

MEMORY Read max/min temperatures Clear memory record

SNOOZE/ Trigger snooze alarm, extend backlight

LIGHT & projection

ZONE Toggle RC time & Zone time Zone time setting

C/F Toggle degree C & F unit

RESET System reset

Rotary Knob

FOCUS Adjust focus of projected image

IMAGE ROTATION Rotate projected image

Slide Switch

Continuous Backlight Turn on/off continuous backlight when adapter is connected

Continuous Projection Turn on/off continuous projection when adapter is connected

Light Bar Select “OFF”, “ON” & “ALARM” light bar mode

BATTERY & ADAPTER INSTALLATION

Projection Clock:

Main Power Source: Plug in the 4.5V adapter into the adapter socket at the back casing

** Continuous backlight, projection & light bar only available when adapter is connected

Backup Power: Lift off the battery cover, install 3 pieces of AAA backup batteries according to the

polarity indicated, close the battery cover.

RADIO-CONTROLLED CLOCK

The unit will start synchronizing the clock after battery/adapter installation or reset. In normal mode,

press “SET/ “ in the battery compartment to enforce searching of radio-controlled clock signal. The

antenna icon will appear during synchronization, if the icon disappears afterwards, radio time signal is

not available at the moment. Try other locations later. Place the unit away from source of

interference such as mobile phones, appliances, TV etc.

Antenna icon with full signal strength will appear on screen if the reception of radio-controlled

time is successful. The radio-controlled clock will have a daily synchronization at 02:05 everyday.

Each reception cycle is around 2.5 to 10 minutes.

INDOOR TEMPERATURE

Indoor temperature is located on the top line of the display. Press “C/F“ button to select temperature

unit C/ F.

COLOR LIGHT BAR / NIGHT LIGHT

The color light bar is designed as an intuitive way to know the alarm On/Off status at night. It also

serves as a nightlight.

Light bar slide switch selection:

OFF: Turn off the light bar

ON: Turn on the light bar continuously

ALARM: Light bar turns blue when one of the alarms is set for the next 24 hours

NOTE: Light bar can be activated continuously only when adapter is connected

Produktspezifikationen

Marke:	Balance
Kategorie:	Wecker
Modell:	972423 Radio-Controlled Projection Clock

Brauchst du Hilfe?

Wenn Sie Hilfe mit Balance 972423 Radio-Controlled Projection Clock benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage