Baby Lock Regent Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Baby Lock Regent (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
NEEDLE AND THREAD INFORMATION
Use only the correct needle system as recommended by Baby Lock. For
the Regent, this is . This needle system is designed needle system 134
to withstand high stitching speeds. Choose among sizes 12/80 through
20/125 according to the type of thread you are using.
TO THREAD THE REGENT
1. Place thread cone onto spool post (1), thread through
thread-mast eyelet (2) from back to front and pass
through thread guide (3).
2. Continue to three-hole thread guide (4). Wrap all
three holes from back to front, being careful not to
cross threads. If delicate threads are breaking,
skip one or two holes to lessen tension.
3. Pass through thread guide (5) and continue
down to tension assembly (6). Ensure
that the thread is flossed between
the two tension discs.
4. Catch the take-up spring (7) with thread and
pull it down under the stirrup thread guide (8).
5. Bring the thread up and through the hole of
the take-up lever (9) from back to front, and
then through the lower thread guide (10).
Finally, thread through the needle bar
thread guide hole (11).
6. Follow the groove down the front of the needle
and insert thread through the eye of the needle (12) from
front to back. While pulling thread through the eye, be
careful that the thread does not twist around the needle.
NEEDLE SIZE THREAD SIZE
12 and 14 monofilament, 100 wt. silk, 60 wt. poly, mylar
16 monofilament, hologram, 100 wt. silk, 60 wt. poly, 50 wt. poly, 50 wt. cotton, some 40 wt. threads.
18 40 wt. cottons and poly, 30 wt. cottons and poly
20 Any thread 30 wt. and heavier such as 12 wt., 19 wt., 30 wt.
E
D
1
2
3
49
10
11
12
4
5
5
6
7
78
8
6
Quick Reference Card
REGENT SCREEN BUTTONS
OTHER BUTTONS ON THE MAIN SCREEN
Basting Mode: Basting stitches can be
created in Regulated and in Manual mode.
Needle-Stop: Touch to toggle between
having the needle stop in the up or down
position when you stop stitching. It does
not affect the needle at the time you
touch the button. Your choice displays in
gold.
Quick-Set Tension®: The number on the
button indicates the current tension, which
is set by manually turning the tension knob.
Bobbin Estimator: The number on this
button shows an estimate of how much
thread remains on the bobbin. This number
updates as you quilt. As the number gets
closer to zero, the bobbin is running out of
thread.
Play: Press the Play button in order to
begin quilting.
Pause: Press the Pause button in order to
stop quilting.
Manual Stitching Mode: Touch the Manual
button and then specify the stitches per
minute (SPM) by pressing the (+) or (-) button
or selecting one of the two SPM presets. The
faster you move the fabric, the longer the
stitches become.
Regulated Stitching Mode: Touch the
Regulated button and then select either
Cruise or Precision stitch regulation. A
consistent stitch length (stitches per inch)
will be maintained regardless of how fast the
fabric is moved, unless moved too fast for the
machine to keep up.
Cruise Stitch Regulation: Touch the Cruise
button and specify the stitches per inch
(SPI) and stitches per minute (SPM) cruise
settings. Machine starts to stitch immediately,
at the chosen SPM cruise speed, when the
Pause/Play button is pressed or foot pedal is
engaged. When you begin to move the fabric,
a consistent stitch length will be maintained
(SPI).
Precision Stitch Regulation: In this mode,
the machine stitches only when the fabric is
moved. Touch the Precision button and specify
the stitches per inch (SPI). Press the Pause/
Play button or engage the foot pedal and move
the fabric to start quilting. When you stop
moving the fabric, the needle will pause in mid-
stroke. Move the fabric to resume stitching.
MACHINE TOOLS BUTTONS
These buttons are available after selecting the Machine Tools button.
AlarmsCalculator Software
updater
Timer and
Counter
Diagnostics
STITCHING MODES
TOOLBAR BUTTONS
Touch this icon to open
the
Main Screen
.
Touch this icon to
open the
Tools
.
Touch this icon to see
System Information
.
The toolbar buttons are available on every Regent screen. For more information about tools and settings, see the
Machine Tools
and
Information Screen
sections of the Regent manual.
LightsLow Bobbin
Estimator
Language


Produktspezifikationen

Marke: Baby Lock
Kategorie: Nicht kategorisiert
Modell: Regent

Brauchst du Hilfe?

Wenn Sie Hilfe mit Baby Lock Regent benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Baby Lock

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-