Azden SGM-3416L Bedienungsanleitung

Azden Mikrofon SGM-3416L

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Azden SGM-3416L (4 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
SGM 3416/3416L-
BROADCAST SPEC SHOTGUN MICROPHONE-
OPERATING MANUAL
2
Thank you for purchasing the Azden SGM 3416/3416L broadcast spec shotgun microphone. Designed for - -
video and audio professionals, the SGM 3416/3416L is a super direconal electret condenser microphone - -
with a wide frequency response and ultra low noise levels. Each SGM 3416/3416L is tested before leav-- -
ing the factory and accompanied by its own frequency response chart.
POWER
The SGM 3416/3416L is powered by external Phantom Power. To power the unit, connect an XLR cable -
(not included) to the microphone with a voltage source that supplies between 11 and 52 VDC.
MIC OUTPUT
The SGM 3416/3416L has a balanced 3 pin XLR output and will work in any impedance microphone input - -
of 1K ohm or less. Due to the wide variety of possible connecons and equipment used with the SGM-
3416/3416L, an output cable is not supplied.
WIRELESS OPTION
The SGM 3416/3416L can be turned into a wireless microphone by purchasing one of Azden’s unique XLR -
plug in transmiers and matching receiver. For more details, contact your Azden dealer or visit our web--
site at www.azdencorp.com
SHOCK MOUNT HOLDER-
The SGM 3416/3416L is supplied with a shock mount holder and a replacement boom plate for boom - -
pole/tripod. Push the barrel into the clips unl it is secured. To secure the holder to a camera shoe, slide
the older into the camera shoe and ghten the thumb wheel by turning it clockwise unl it is ght. To
mount the SGM 3416/3416L onto a boom pole or tripod, replace the boom plate of the shock mount - -
holder with the supplied boom plate with a 3/8” threaded hole and screw the holder to a boom pole/
tripod by turning it clockwise.
Balanced 3 pin XLR output-
Shield
Cold
Hot
3
180/247mm
SPECIFICATIONS
SGM-3416
Type: Electret condenser
Frequency response: —20,000Hz 40
Sensivity: Uni direconal, 33dB at 1kHz (0dB=1V/Pa) - -
Impedance: 120Ω at 1kHz
Max SPL input level: 115dB SPL (1kHz at 1% T.H.D)
Signal to noise rao: 78dB (1kHz at 1Pa)
Power source: Phantom DC 11 -52V
Weight: 125g (4.4oz)
Dimensions: ɸ19mm x 180mm (ɸ3/4” x 7”)
Connector: Balanced 3 pin XLR -
SGM-3416L
Type: Electret condenser
Frequency response: —20,000Hz 40
Sensivity: Uni direconal, 33dB at 1kHz (0dB=1V/Pa) - -
Impedance: 120Ω at 1kHz
Max SPL input level: 115dB SPL (1kHz at 1% T.H.D)
Signal to noise rao: 78dB (1kHz at 1Pa)
Power source: Phantom DC 11 -52V
Weight: 160g (5.64oz)
Dimensions: ɸ19mm x 247mm (ɸ3/4” x 9 3/4”)
Connector: Balanced 3 pin XLR -
FREQUENCY RESPONSE
POLAR PATTERN
FREQUENCY RESPONSE
POLAR PATTERN


Produktspezifikationen

Marke: Azden
Kategorie: Mikrofon
Modell: SGM-3416L

Brauchst du Hilfe?

Wenn Sie Hilfe mit Azden SGM-3416L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Azden

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung fĂĽr -Kategorien-