Azden 2000XT Bedienungsanleitung

Azden Mikrofon 2000XT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Azden 2000XT (8 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

SPECIFICATIONS

2000URX

Receiving Frequency 638.125Mhz ~ 661.875 Mhz 188 Channels

Receiving Method Space diversity double super heterodyne

Sensibility 0.8 V μ

Reference Deviaon ±5kHz

Max. Deviaon ±40kHz

Inter Modulaon 65dB or more

Noise Reducon Compander

Audio Output Level 4dBm MAX

Signal noise Rao 100dB or more (100% Dev)-to-

Distoron Rao 0.8% or less (100% Dev)

Antenna Connector BNC Connector

Interface w/ Camera D sub 15pin (Si s) D sub 25 pin(Si) - - -

Audio Output Jack XLR 3 / 3.5mm stereo mini for monitoring -32-

Power DC 6V (4 AA baeries)

External Power DC 11V ~ 15V(URX) DC 7V (Si s) DC 12(10~17V) (Si) -

Power Consumpon 6V 240mA

LED 3 point RF level, diversity (A/B) (URX

3 point AF level, Tone squelch (URX)

LCD Receiving frequency, channel (URX)

Frequency, Channel, RF Level w/ indicators,

- Diversity A or B, AF Level w/ indicators (URX Si s, URX Si)

Size 98mm (W) x 109.5mm (H) x 40mm (D) (URX)

- 80mm (W) x 22mm (H) x 35mm (D) (URX/Si s, URX/Si)

Weight 620g(URX)

- 245g(URX/Si s)/240g(Si)

2000BT/XT

Transming Frequency 638.125MHz~661.875MHz (188channels)

Radio Type F3E (FM)

Oscillaon Crystal controlled PLL Synthesizer - - -

Aerial Power 50mW

Tone Frequency 32.768 kHz

Noise Reducon Compander

Mic In/Level - - Hirose 4pin/ECM: 60dBu

Impedance 3.3 Ω

Frequency Response 50~15kHz±1.5dB

LED AF- Peak, Baery Low Alarm

LCD Output frequency, channel, accumulated me

Power DC 3V (2AABaeries)

Power Consumpon Less than 130ma

Baery Life About 8 Hours (when used AA Baeries)

Due to constant improvements, specicaons are subject to change without noce.

Licensing

Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on

the user’s classicaon, applicaon and frequency. Contact the appropriate agency (FCC in the USA) for further informaon.

Azden Corporaon, 200 Valley Rd, Suite 101, Mt. Arlington, NJ 07856

tel - - 973.810.3070 • fax 973.810.3076 • email - sales@azdencorp.com • web www.azden.com-

2000URX • 2000URX/Si/Si S • 2000BT • 2000XT-

ENHANCED BROADCAST PERFORMANCE

UHF WIRELESS SYSTEM

User’s Guide

2000URX Receiver

2000URX/Si Receiver

2000BT Transmier

j j

l p

o k n

s r

r o p

q l

j m

E. Display

In addion to showing the frequency and the channel number, the display [J]

also shows other useful informaon.

The LCD segments on the le show the approximate remaining baery life

(from 1 to 3 segments) with 3 segments meaning maximum baery power.

The boom segment will blink when the baery power falls to less than

2.2VDC and indicates that it is me to replace the baeries. Azden recom-

mends the use of Alkaline baeries only.

Across the top of the display, up to 5 segments will illuminate depending on

the strength of the transmied audio signal From 2 (weak) to 5 (strong). The -

rst (le) segment will light when the AUDIO switch is turned ON. The best

audio is achieved when 4 to 5 segments are lit. If all 5 segments are lit conn-

ually, the signal is too strong and could overload the input of the receiver.

Move the microphone further away from the sound source.

The display can also show the total number of hours of use (change to this

display using the mode [n] buon. To start, aer choosing the TIME mode,

press the UP [o] Buon unl the display shows 00:00. Then, each me the

transmier is turned ON the clock will keep track of the total hours and

minutes used. This is a handy way of keeping track of baery life.

USING THE 2000XT TRANSMITTER’S CONTROLS AND DISPLAY

A. Power

The POWER ON/OFF switch [r] turns the 2000XT ON or OFF.

B. Audio

Prior to turning the 2000XT ON it is best to set the AUDIO switch [ q] To OFF.

When ready to begin transming, switch to ON. The OFF posion acts as a

“mute” maintaining the RF signal but turning o the audio.

C. MIC Connector/Locking Ring

This 3 pin XLR connector [l] is the microphone input. Any low impedance mi--

crophone with a corresponding connector can be aached here. If the micro-

phone requires external power (Phantom Power) the 2000XT can supply

48VDC. The XLR connector is wired with pin #1 as ground, pin # 2 as audio +

(and +48VDC when Phantom Power is ON) and pin #3 as audio.

Once the microphone is plugged into the 2000XT the locking ring [m] should

be rotated clockwise unl snug. To remove the microphone, rst rotate the

locking ring counterclockwise and then, while pressing the XLR release, pull

the microphone straight away from the 2000XT.

D. Input Level Adjustment

This screwdriver adjustment [p] controls the input level of the microphone.

Counterclockwise rotaon reduces the input gain while clockwise rotaon in -

creases the input gain.

n o

q r

INTRODUCTION

Thank you for selecng the Azden 2000 Series for your portable/

ENG on camera UHF wireless needs. We are condent that these -

components will perform beyond your expectaons. For over 50

years, Azden Corporaon has been creang technologically ad-

vanced products. By taking advantage of the latest in CAD design

and SMT producon techniques, Azden’s engineers are able to pro-

duce products that exceed the published specicaons and per-

form well beyond the warranty period.

The 2000 Series represents a breakthrough in on camera, digital -

frequency selectable UHF receivers and transmiers. Its enhanced -

performance assures you of the highest image rejecon combined

with the nest in audio clarity. The PLL synthesized mixer/local os--

cillator provides for extremely accurate frequency selecon while

the twin antenna true diversity front end reduces mul path dis-- - -

toron caused dropouts to near zero.

In the real world of ENG, the ability to be able to select a “clear”

frequency on the spot is vitally important. Going out into the eld

with a single frequency unit invites disaster since there is no way of -

knowing what frequencies will be used by the other crews that are

covering the same story or event. Think of the 2000 Series units as

your insurance policy Your assurance of geng the story.-

provide you with years of worry-free, high quality performance.-

Produktspezifikationen

Marke:	Azden
Kategorie:	Mikrofon
Modell:	2000XT
Display-Typ:	LCD
Akku-/Batteriebetriebsdauer:	8 h
Breite:	63 mm
Tiefe:	27 mm
Gewicht:	180 g
Produktfarbe:	Schwarz, Silber
Akku-/Batterietyp:	AA
Höhe:	98 mm
Eingebautes Display:	Ja
Anzahl Kanäle:	188 Kanäle
LED-Anzeigen:	Ja
Anzahl unterstützter Akkus/Batterien:	2
Formfaktor:	Einsteck-Sender
Mikrofon-Frequenzgang:	50 - 18000 Hz
Funkfrequenzbereich (RF):	638.125 - 661.875 MHz
Betriebsfrequenzart:	Ultrahochfrequenz (UHF)