AXTON AE502C Bedienungsanleitung
AXTON
Autolautsprecher
AE502C
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AXTON AE502C (16 Seiten) in der Kategorie Autolautsprecher. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
2 - WAY C O M PO N E N T SYS T E M S
â– â– â– AE402C AE502C AE652C
EINBAUANLEITUNG / INSTALLATION GUIDE
– 2 –
Dear Customer,
Thank you and congratulations on your purchase of this AXTON 2-way component
system. This loudspeaker system exclusively uses high quality parts and components.
As with all high-quality car audio components, professional installation is highly
recommended. If you plan on installing this component system by yourself, please read
the following installation guide carefully, before you attempt the installation. You should
retain this manual, the packing and the purchasing receipt for future reference. For any
further information about mounting, connecting or adjusting this speaker system, please
contact your authorized AXTON dealer.
UNPACKING THE SYSTEM
Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and
check whether all parts are in good undamaged condition, and match with the set
contents listed below:
n 2 mid/woofers
n 2 grilles
n 2 tweeters
n 2 inline crossovers with wires for tweeter and mid/woofer
n 1 set of tweeter & mid/woofer mounting hardware
n 1 instruction manual
Please contact your authorized AXTON dealer if the content of this set is incomplete or
parts of it show signs of transport damage.
BEFORE YOU START
The rst step is to choose the most suitable or best sounding location for the speakers to
be installed. Keep in mind that the best looking spot might not be the one that gives you
best sound. The factory OEM speaker cutouts usually provide space and a stable platform
for fast and convenient mounting of new mid/woofer units. To use the OEM speaker
cutouts is highly advantageous in most cases and it will also prevent you from having to
cut new holes. For the tweeter mounting, some extra care to nd the best spots will
usually pay back in form of improved front staging or/and better resolution.
– 3 –
MOUNTING THE MID/WOOFERS
Remove the factory grilles of the door – or if necessary – the complete door panels. The
EURO-DIN frame mid/woofer units provide bolt and screw holes to t a great variety of
OEM standard patterns, making them ideal for a direct replacement of factory installed
speakers in European or Asian cars.
n Remove the factory installed mid/woofers or fullrange speakers. Before you attempt
to install the new AXTON mid/woofers, you must check the available installation depth
of the left and right front door. To do this, slide down both windows and hold the AXTON
mid/woofers in place to reassure the available installation depth does sufce. This test is
important, failure to do this may let you end up with an impaired window function!
n Connect the wire from the inline crossover to the main speaker wire in the door. For this
purpose, crimp connectors are suited best. Do this for both front doors.
n Connect the crossover wires to the blade connector terminals of the mid/woofer units.
n Pull the tweeter wire coming from the inline crossover into the loacation, where the
tweeter shall be mounted later on. If you fail to do so, you will have to remove the mid/
woofer in a later step.
n Check that there are no gaps between the speakers and the mounting surface in the
doors. Note that some (newer) cars will require the use of car-specic mounting adapters
made of pastic material. Without them, the Euro-DIN mid/woofers will not t to the OEM
cutout, or the available installation depth will not be sufcient. Such adapters are usually
available from your authorized AXTON dealer.
n The cone and surround material of the mid/woofers is 100% water proof. However a
direct exposure of the mid/woofer to water inside the doors should be avoided. In most
cases, protection foils are pre-installed to protect the OEM full-range speaker. Do not rip
this foil out of the doors, it is there for a purpose!
n Fix the mid/woofer to the speaker mounting hole using the provided screws. If the mid/
woofers are directly screwed onto the sheetmetal of the door, use the metal clips included
with the mounting hardware. You can now reinstall the factory plastic grilles, but make
sure the surrounds of the mid/woofers do not come in touch with plastic parts standing
off on the backside of the grilles.
n In case you have chosen a new location for your mid/woofers (other than factory
cut-out), use the speaker protection grilles. Just mount them on top of the mid/woofers.
CROSSOVER WIRING
The crossover can be mounted in almost any location inside the vehicle. Just make sure
not to install the crossover units, where they may be exposed to dirt or water.
Maintain polarities all the way – double check for correct connection. It is very important
to make sure that all the connections are electrically in phase, which means positive wire
(+ or red) is connected to positive terminal, and negative wire (- or black) is connected to
the negative terminal. The wires are equipped with the right fast-on connectors, to make
sure polarity is correct. Reverse polarity connections of the inline crossover to the ampli-
er, will cause a very low bass output and a messed up front staging.
Produktspezifikationen
| Marke: | AXTON |
| Kategorie: | Autolautsprecher |
| Modell: | AE502C |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AXTON AE502C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autolautsprecher AXTON
21 August 2024
21 August 2024
18 August 2024
17 August 2024
10 Juli 2024
10 Juli 2024
Bedienungsanleitung Autolautsprecher
- Autolautsprecher Clatronic
- Autolautsprecher Exibel
- Autolautsprecher Philips
- Autolautsprecher Sony
- Autolautsprecher MarQuant
- Autolautsprecher Renkforce
- Autolautsprecher Blaupunkt
- Autolautsprecher Kenwood
- Autolautsprecher Autotek
- Autolautsprecher Pyle
- Autolautsprecher Auna
- Autolautsprecher Caliber
- Autolautsprecher Pioneer
- Autolautsprecher JBL
- Autolautsprecher JVC
- Autolautsprecher Hifonics
- Autolautsprecher Magnat
- Autolautsprecher ICES
- Autolautsprecher Alpine
- Autolautsprecher Renegade
- Autolautsprecher Rockford Fosgate
- Autolautsprecher Crunch
- Autolautsprecher Clarion
- Autolautsprecher Mac Audio
- Autolautsprecher ESX
- Autolautsprecher DNT
- Autolautsprecher Boss
- Autolautsprecher Hertz
- Autolautsprecher Kicker
- Autolautsprecher JL Audio
- Autolautsprecher DLS
- Autolautsprecher Dynex
- Autolautsprecher Emphaser
- Autolautsprecher Focal
- Autolautsprecher Fusion
- Autolautsprecher Infinity
- Autolautsprecher Lanzar
- Autolautsprecher Mtx Audio
- Autolautsprecher Radical Audio
- Autolautsprecher Rodek
- Autolautsprecher Soundstream
- Autolautsprecher AudioControl
- Autolautsprecher Metra
- Autolautsprecher Memphis Audio
- Autolautsprecher Aquatic AV
- Autolautsprecher SoundMAX
- Autolautsprecher Sinus Live
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
10 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
7 Oktober 2024
2 Oktober 2024
2 Oktober 2024