Avantco BMFW3 Bedienungsanleitung
Avantco
Warmhoudplaat
BMFW3
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Avantco BMFW3 (5 Seiten) in der Kategorie Warmhoudplaat. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/5
08/2019
Please note this unit must be installed by a qualied person!
Unpacking:
1. Remove the bain marie and operaon manual from the packaging.
2. Remove all packaging materials and protecve coverings, including the protecve plasc coang
on all stainless steel, from the bain marie.
3. Wipe all surfaces with a clean, sanized cloth.
4. Check unit for damage. Immediately nofy your dealer if the bain marie is damaged.
Installaon:
1. Remove all components from shipping container. (Fig. 1)
2. Using the screws secure the right & le parts on the tank body. (Fig. 2)
3. Put one piece of glass into the hook of the right & le parts. (Fig. 3)
4. Put the 2 long poles into the holes of the right & le parts. And put another piece of glass
between the long poles and the right & le parts. Secure the 4 screws. (Fig. 4)
5. Bain marie is ready for use. (Fig. 5)
Fig. Fig. Fig. 1 2 3
Fig. Fig. 4 5
The unit must be connected to a power point with compable power rang.
1. The unit is equipped with a heang element. Add adequate water inside the tank.
2. Rotang the thermostat knob. Do not use the bain marie unl the pre-heat cycle has elapsed
as you will not achieve opmum product holding capabilies.
3. Place the cooked or heated product into gastronorm food pans and place into
bain marie tank.
4. Cover the pans with correct gastronorm lids to suit.
5. Keep close aenon to the temperature of the food product. If the product is too hot it will
out and if the product is too cold it will deteriorate.
6. Dial thermostat models - adjust the thermostat by rotang the dial to desired temperature.
To maintain appearance and increase the service life, the bain marie should be cleaned
at least daily.
1. Before cleaning or moving, unplug the unit and let it cool completely.
2. Carefully empty the water from the well.
3. Wipe the enre well interior with a clean, damp cloth.
4. To avoid damaging the well nish, do not use abrasive materials, scratching cleansers or
scouring pads to clean water deposits from well.
5. If soap or chemical cleansers are used, be sure they are completely rinsed away with clear
water, immediately aer cleansing. Chemical residue could damage warmer.
6. Every two hours, remove pan and check the water level.
DO NOT IMMERSE BAIN MARIE IN WATER OR OTHER LIQUID.
DO NOT SPRAY WITH WATER OR CLEANING PRODUCT. LIQUID COULD ENTER THE
ELECTRICAL COMPARTMENT AND CAUSE A SHORT CIRCUIT OR ELECTRIC SHOCK.
!
Produktspezifikationen
| Marke: | Avantco |
| Kategorie: | Warmhoudplaat |
| Modell: | BMFW3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Avantco BMFW3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Warmhoudplaat Avantco
13 August 2024
Bedienungsanleitung Warmhoudplaat
- Warmhoudplaat Bifinett
- Warmhoudplaat Rommelsbacher
- Warmhoudplaat Unold
- Warmhoudplaat Waring Commercial
- Warmhoudplaat Bartscher
- Warmhoudplaat Topcom
- Warmhoudplaat Olympia
- Warmhoudplaat Beem
- Warmhoudplaat Ariete
- Warmhoudplaat Saro
- Warmhoudplaat Esperanza
- Warmhoudplaat CaterChef
- Warmhoudplaat Duronic
- Warmhoudplaat Salton
- Warmhoudplaat Hatco
- Warmhoudplaat Wells
- Warmhoudplaat Casselin
Neueste Bedienungsanleitung für -Kategorien-
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
2 September 2024
2 September 2024
24 August 2024
21 August 2024