Aurora LM4221H Bedienungsanleitung
Aurora
Laminiersystem
LM4221H
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aurora LM4221H (2 Seiten) in der Kategorie Laminiersystem. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
INTRODUCTION
Congratulations on the purchase of your laminator. Now you
can protect your favourite documents up to size such as A4
photographs, certificates, ID cards, letters etc. in a water
resistant, airtight seal. Follow the instructions for proper use
and keep this manual for future reference.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be observed including the following:
1. Read all instructions.
2. Do not touch hot surfaces.
3. To protect against risk of electrical hazards, do not
immerse cord, plugs the appliance in water or other or
liquid.
4. Close supervision is necessary when the appliance is used
near children.
5. Unplug from the outlet when not in use and before
cleaning. Allow to cool before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner.
7. Do not use outdoors.
8. Do not use the appliance for anything other than the
intended use.
9. Ensure the laminator is turned off when you have finished
laminating.
10. The mains socket sh ld be near the equipment and be ou
easily accessible.
11. Do not laminate sheets containing metal or conductive
materials.
12. If you are laminating a small or irregular shape, please
insert a 2cm/3cm strip of paper against the closed end of
the pouch as shown in the diagram, to prevent jamming.
A short power cord may be provided with this appliance to
reduce hazards resulting from becoming entangled in or
tripping over a longer cord. Extension cords may be used if care
is exercised in their use. If an extension cord is used, the
following must apply:
a. The marked electrical rating should be at least as great as the
electrical rating of the appliance.
b. The extension cord should not drop over the counter top or
tabletop where it can be pulled on by children or tripped over
accidentally.
PART NAME
NOTES
We do not recommend laminating any type of
self-developing photo.
Any photo to be laminated must be dry before processing.
Do not laminate any documents that appear thick or heavy,
as this will get stuck in the laminator (with the thickness
thicker than 0.4mm).
Very thin paper inserted into very thin pouch may cause a
twists and jam the laminator.
In order to avoid creasing, please DO NOT insert the open
side of the film into the laminator first.
When the film exits after being laminated, it may be very
hot and soft . Handle the newly laminated item with care.
Pressing the item with a book or other heavy objects may
help.
This product bonds the laminate sleeve to the item being
processed .It is a permanent seal and cannot be removed.
We do not recommend laminating any collector’s items of
value or any item you may wish to remove at a later date.
Do not attempt to laminate coins or thicker items .
HOW TO USE
1. Insert the mains plug into an electric socket and slide the
power switch to the left or right based on the pouch you
use. The POWER indicator will light up.
2. Wait 4-6 minutes for the machine to warm up. Once it has
reached laminating temperature, the READY indicator will
light up.
3. Place the item to be laminated into the laminating pouch,
and centre it within the pouch. Please ensure that your
document or picture is positioned as close to the sealed
edge as possible ensuring there is a margin of 3-9 left mm
between the item to be laminated and the edge of the
pouch.
The laminator can laminate film between the
thicknesses of 80-150microns.
The laminator works with most types of heat-sealing
laminating pouches.
4. Insert the sealed edge of the laminating pouch directly into
the laminator opening until it is caught and drawn in (no
carrier is required), take care to ensure that the document is
straight and centrally positioned.
5. Remove the pouch from the rear of the machine after it has
stopped moving.
ROLLER RELEASE BUTTON
1. If a pouch jams in the laminator, slide the power switch to
off, switch off and remove the mains plug.
2. Press the roller release button on the back of the laminator
and gently pull the pouch out of the entry slot.
3. Do not insert tools or other objects into the entry slot as this
may damage the rollers.
MAINTENANCE
Do not operate the laminator more than 2 hours at a time.
Wait at least 15 seconds between every laminating items.
Allow the laminator to cool at least 30 minutes after
turning off.
Do not touch or place anything on hot the surfaces, wait
for the unit to cool before moving or cleaning.
CARE AND CLEANING
To reduce the risk of fire or electrical shock, do not open the
unit. No user serviceable parts are insid e.
Keep your hands and the cord away from hot parts of the
appliance during operation.
Since deposits can built up over a period of time please
clean the rollers periodically after use by inserting a
folded A4 sheet of paper into the feeding slot of the
laminator (folded edge first). The paper will come out
with any residue present. Repeat several times to clean the
roller.
Never clean with scouring powders or hard implements.
Wipe clean with a soft cloth.
SUGGESTED USES
Photographs Legal documents
Recipe cards Letters
Membership cards Point of sale
Fishing license Luggage tags
Certificates Homemade bookmarks
TECHNICAL DATA
Voltage 240V ,50Hz -----------------------------
Power --------------------- ------- Max. 360W
Current ----------------------------- 1 A .5
Film thickness -150 micron ---------------------- 80
Max. document size A4 size ---------------
Warm up time Approx.4- min ------------------- 6
Laminating speed Approx.32cm/min ------------------
Max. document thickness 4 ----------- 0. mm
POUCH SPECIFICATIONS
1. Plea e s make sure that enough margin (3-9 mm) is left
between the item to be laminated and the edge of the
pouch.
2. Do not trim the pouch prior to laminating.
3. Please ensure that good quality pouches of the specified
thickness (stated above) are used, as this will reduce the
risk of jamming and prolong the life of the laminator.
---------- SAVE THESE INSTRUCTIONS --------
Produktspezifikationen
| Marke: | Aurora |
| Kategorie: | Laminiersystem |
| Modell: | LM4221H |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Aurora LM4221H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laminiersystem Aurora
20 August 2024
Bedienungsanleitung Laminiersystem
- Laminiersystem Exibel
- Laminiersystem Hama
- Laminiersystem Nedis
- Laminiersystem MarQuant
- Laminiersystem Olympia
- Laminiersystem United Office
- Laminiersystem Sencor
- Laminiersystem Brother
- Laminiersystem Leitz
- Laminiersystem Rexel
- Laminiersystem Q-CONNECT
- Laminiersystem Fellowes
- Laminiersystem GBC
- Laminiersystem Ednet
- Laminiersystem Desq
- Laminiersystem Genie
- Laminiersystem Pavo
- Laminiersystem Peach
- Laminiersystem Royal Sovereign
- Laminiersystem Tracer
- Laminiersystem GFP
Neueste Bedienungsanleitung für -Kategorien-
30 September 2024
29 September 2024
27 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024