Auray BAI-2U Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Auray BAI-2U (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Two-Section Broadcast Arm
BAI Series
Owner’s Manual
with Internal Springs
2BAI SeriesOwner’s Manual
Introduction
Thank you for choosing the Auray two-section broadcast arm with
internal springs. This versatile and sturdy broadcast arm is for studio as
well as home use, and is ideal for broadcast, voiceovers or podcasts.
The BAI-series broadcast arms are designed with internal springs
that provide a clean and sleek look. The internal balance springs are
precision engineered to support and hold in place microphones of
up to 5 lb. (2.27 kg). The design also minimizes handling noise when
repositioning the arm. The broadcast arm features a standard 5/8Ëť27
microphone stud mount that is compatible with most shockmounts
and microphone clips. The angle of the microphone stud mount can be
adjusted and secured with the locking knob, and the angle is maintained
when repositioning the arm – eliminating the need to readjust it every
time the arm is moved. An extension of up to 40 inches and the ability
to rotate the arm 360° allow for precise microphone placement.
The BAI series features a heavy-duty combo mount that consists of a sturdy
C-clamp and a heavy-metal desktop mount. The C-clamp is capable of
fastening onto desktops up to 2.3-inches thick. The C-clamp’s slim design
minimizes the clearance needed to mount it between the desk and wall.
The desktop mount detaches from the C-clamp and provides the option of
permanent installation to a desktop with the mounting screws (included).
A 14-inch riser is included for adding height to the broadcast
arm in order to extend over computer or studio monitors.
Options are available with integrated 15-foot Kopul 2000 XLR cable
(BAI-2X), or a 10-foot Type A to Type B USB cable (BAI-2U).
3BAI Series Owner’s Manual
4
6
Broadcast Arm
Threaded microphone mount 1
Microphone locking knob 2
Base stud 3
Combo mount
C-clamp 4
Tightening handle 5
Desktop mount 6
Insert hole 7
Insert hole locking knob 8
Screw holes (5) 9
Mounting screws (4) 10
Riser
Mounting stud 11
Riser insert hole 12
Riser locking knob 13
Microphone cable
XLR microphone cable (BAI-2X only) 14
USB cable (BAI-2U only) (Not Shown)
Overview
1
3
7
2
8
5
12
10
13
11
9
14


Produktspezifikationen

Marke: Auray
Kategorie: Nicht kategorisiert
Modell: BAI-2U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Auray BAI-2U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Auray

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-