Audio-Technica XM5S-SV Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica XM5S-SV (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
UNIDIRECTIONAL DYNAMIC MICROPHONE
Audio-Technica’s Xtreme Series are high-output design, excellent
sound and rugged, all-metal construction, this totally redesigned
series creates a new standard in affordable vocal microphones.
There are four models - X M1S, XM3S, XM5S and XM5S-SV in Xtreme
Series.
- High-output design for vocals that cut through the mix.
- Unidirectional dynamic element design.
- XM3S microphone is tailored frequency response, also used for
optimal instrument reproduction.
- XM5S microphone is extended frequency response for optimal vocal
reproduction.
- XM5S-SV microphone is nished with silver colour plated, for
dazzlingly exhibit on the stage.
- Corrosion-resistant contacts from gold-plated XLRM-type
connectors.
- Rugged all-metal construction for reliable performance.
- Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source.
Output from the microphones XLRM-type connector is low
impedance (Lo-Z) unbalanced. The signal appears across Pins 2; Pin
1 is ground (shield). Output phase is “Pin 2 hot” positive acoustic
pressure produces positive voltage at Pin 2.
Plug Type Ground Audio “+”
XLR Pin 1 / Pin 3 Pin 2
6.3mm TS Sleeve Tip
To avoid phase cancellation and poor sound, all mic cables must
be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance
(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching
transformer (A-T CP8201 or equal) at the equipment input.
When using the microphone in settings with a stage monitor speaker,
the speaker should be located 135° off axis (45° off the rear of the
microphone). This placement, in conjunction with the microphone’s
uniform cardioid pickup pattern, will virtually eliminate the possibility
of undesired audio feedback.
Take care to keep foreign particles from entering the windscreen.
An accumulation of iron or steel filings on the diaphragm, and/or
foreign material in the windscreen’s mesh surface, can degrade
performance.
FORM No. ATGC-L0136-08-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 80-15,000 Hz
75-15,000 Hz
60-18,000 Hz
OPEN CIRCUIT SENSITIVITY -53 dB (2.2 mV) re 1V at 1 Pa
-54 dB (1.9 mV) re 1V at 1 Pa
-54 dB (1.9 mV) re 1V at 1 Pa
IMPEDANCE 500 ohms
600 ohms
600 ohms
WEIGHT (less cable) 250 g
270 g
250 g
DIMENSIONS
169.0 mm - long, 52.0 mm - head diameter
169.0 mm - long, 42.0 mm - head diameter
167.0 mm - long, 50.0 mm - head diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLE 5m cable with XLRF-type connector at
microphone and 6.3mm plug
ACCESSORIES FURNISHED Stand clamp for ⅝”-27 threaded stand;
⅝”-27 to ⅜”-16 threaded adapter
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
FORM No. ATGC-L0136-08-C
Machida • Tokyo Japan
单指向性动圈式话筒
Xtreme 情系列为高输出,充满动感的音色和堅设计
全金属外壳结构,以合理价格而又有出色话音表现的标准设计的
演出话列设XM1S, XM3S, XM5S
XM5S-SV
- 合人话音高输
- 单指向性动圈收音头结构。
- XM3S话筒以广阔的频率响应收音而开发,并可适合于乐器收
的应用
- XM
5S筒以专为要求特广阔的频率响应的人声收音而开发,
别适合于歌唱的应用。
- XM
5S-SV话筒配以银色电镀外壳设计,在舞台上更为耀眼夺目
- 蝕的金卡,可的导电效
- 耐用设计可靠
-
隔离
话筒的 卡农输出端为低阻抗非平衡输出,话音频信号最XLRM
终以卡农公头的2号针脚输出,而1号及3号针脚则为地线(屏蔽)
接。出相电平2号针脚上。
插头类型 地线 音频+”信号
XLR 卡农 1号/3号针脚 2号针脚
6.3mm TR 大二芯 Sleeve(套) Tip(尖)
为避免出现相位相互抵消而失真的情况,所有话筒连接时,
接线必需以 1-12-23-3式把针脚连接。如连接高阻抗的话
筒输入,请配套阻抗匹配变压器AT8201
当话筒及现场监听音箱使用时,需要把音箱放置于话筒
135°后方(正后方的 45°置)。在这位置上,由于话筒的心形
向性设计,可减低出现反馈回声的情况。
小心不要把金属碎或铁屑掉进防风罩内,铁屑会吸进收音头磁铁
中,或贴在防风罩内,将会影响及减低收音效果
技术指标
收音头 动圈式
指向特性 心形指向性
频率响应 80-15,000 Hz
75-15,000 Hz
60-18,000 Hz
开通灵敏度 -53 dB (2.2 mV) 1V 1 Pa
-54 dB (1.9 mV) 1V 1 Pa
-54 dB (1.9 mV) 1V 1 Pa
输出阻抗 500 欧姆
600 欧姆
600 欧姆
重量 250
270
250
外形尺寸
169.0 mm - 长度, 52.0 mm - 防风罩直径
169.0 mm - 长度, 42.0 mm - 防风罩直径
167.0 mm - 长度, 50.0 mm - 防风罩直径
输出连接器 内置 XLRM-3针卡农公头
连线 5m XLRF 6.3mm 连接线
附属品 ⅝”-27接头
⅝”-27⅜”-16转接头。
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向持性
声压曲线
1刻度
5 dB
频率
10 dB
20k10k5k2k1k50020010050
频率持性
频率 (
赫兹)
电平 平直
响应电平 (dB)
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向持性
声压曲线
1刻度
5 dB
频率
10 dB
20k10k5k2k1k50020010050
频率持性
频率 (
赫兹)
电平 平直
响应电平 (dB)
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向持性
声压曲线
1刻度
5 dB
频率
10 dB
20k10k5k2k1k50020010050
频率持性
频率 (
赫兹)
电平 平直
响应电平 (dB)


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: XM5S-SV

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica XM5S-SV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-