Audio-Technica AT831R Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AT831R (2 Seiten) in der Kategorie Microfoon. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
MINATURE CARDIOID CONDENSER MICROPHONE
FORM No. ATGC-L0131-07-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-change back plate permanently
polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40-16,000 Hz
OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D.
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
DYNAMIC RANGE (typical) 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
SWITCH Flat, roll-off
WEIGHT (less cable and accessories)
MICROPHONE
POWER MODULE
2.8 g
81 g
DIMENSIONS
MICROPHONE
POWER MODULE
25.0 mm - long, 10.2 mm - diameter
92.9 mm - long, 18.9 mm - diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLE 4.0 m long (permanently attached to
microphone), 3.2 mm diameter,
2-conductor, shielded cable with TA3F
output connector
ACCESSORIES FURNISHED AT8538 power module;
AT8417 clothing clip;
AT8444 instrument adapter;
AT8116 windscreens;
protective carrying case
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Roll-off (MT830a)
- Clip-on lavalier mic provides crisp, full-sounding voice pickup
- Also excels as an instrument mic, especially for pickup of
acoustic guitar with included AT8444 instrument adapter
- Excellent gain before feedback and suppression of background
noise
- UniSteep® lter provides a steep low-frequency attenuation to
improve sound pickup without affecting voice quality
- Operates on phantom power only
For use as a lavalier, attach the microphone about six inches
below the chin. Anticipate movements that may cause the
microphone to rub against or be covered by clothing, and
position the microphone to avoid it.
The AT831R is intended for use in professional applications
where remote power is available. It requires 11 to 52V DC
phantom power, which may be provided by a mixer or console,
or by a separate, in-line source such as the Audio-Technica
AT8801 single-channel or CP8506 four-channel phantom power
supplies.
Output from the power module’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot
positive acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables
must be wired consistently: Pin 1-to-Pin 1, etc.
An integral 80 Hz high-pass UniSteep® filter provides easy
switching from a flat frequency response to a low-end roll-off.
The roll-off position reduces the microphone’s sensitivity to
popping in close vocal use. It also reduces the pickup of low-
frequency ambient noise (such as trafc, air-handling systems,
etc.), room reverberation and mechanically coupled vibrations.
The microphone is RoHS compliant–free from all substances
specied in the EU directive on hazardous substances.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 4C for extended periods. Extremely
high humidity should also be avoided.
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向特性
频率特性
声压曲线 1刻度5 dB
频率
频率 (赫兹)
电平 平直
响应电平 (dB)
FORM No. ATGC-L0131-07-C
Machida Tokyo Japan
-
- 可使用在乐器收音上,配置AT8444结他夹持装置,可把话
-
- UniSteep® - 高通滤波器,提供了一个高效能的高通滤波,
把低频噪声作出衰减而无损话音的收音质量。
- 使用幻象供电工作。
AT831R 是为戴在表演者衣服、领带上,在不防碍外观,但
有超卓收音效果而设计的超小型电容话筒。佩戴在领带时,请
注意把话筒夹持于颈下约 的位置。而为避免衣服碰到150mm
话筒时产生的噪音,请注意话筒夹持的位置不要接触到其他衣
配有一个 供电模组,需要提供 幻象供电, AT8538 11V52V
使使 AT8801
单通道或 四通道幻象电源供电器作独立供电。 AT8506
的 卡XLRM
23号针脚输出,而1号针脚则为地线
()2号针脚上
为避免出现相位相互抵消而失真的情况,所有话筒连接时,接
线必需以1-12-23-3
UniSteep® 高通滤波电路,可轻易由平直的频率
响应,开启为于80 Hz以下衰减的收音效果,应高通滤波器可
减低话筒在近距离讲话收音时的喷气声,并可减低收音环境中
低频噪声(如外间汔车引擎声,空调系统的风声等),房间中的
筒 符Ro HS
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱,应
43°C
湿
高通滤波 (MT830a)
技术指标
收音头 固定充电背板,静电型电容式
指向特性 心型指向性
频率响应 40-16,000 Hz
开通灵敏度 -42 dB (7.9 mV) 1V 1 Pa
输出阻抗 250 欧姆
最大输入声压 141 dB SPL, 1 kHz 1% T.H.D
高通滤波 80 Hz, 18 dB/octave
动态范围(典型) 112 dB, 1 kHz 于最高声压
讯噪比 65 dB, 1V 1 Pa
幻象供电 直流 11-52V, 耗电 2 mA 典型
开关 平直,高通滤波
重量(不带连线与配件)
话筒
供电模组
2.8
81
外形尺寸
话筒
供电模组
25.0 mm -长,10.2 mm -直径
92.9 mm -长,18.9 mm -直径
输出连接器 内置 XLRM-3针卡农公头
连线 4.0 m - 长,3.2 mm - 直径,
话筒固定连接,
2蕊线连屏蔽电线,以TA3F插头连接。
附属品 AT8538 供电模组;
AT8417 领带夹;
AT8444 乐器夹持装置;
AT8116 防风罩;
便携保护袋。

Produktspezifikationen

Marke: Audio-Technica
Kategorie: Microfoon
Modell: AT831R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica AT831R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Microfoon Audio-Technica

Bedienungsanleitung Microfoon

Neueste Bedienungsanleitung für -Kategorien-