Audio-Technica U891Rb Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica U891Rb (1 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
User Manual
CARDIOID CONDENSER BOUNDARY MICROPHONE
U891Rb/U891RWb
Introduction
Thank you for purchasing this product. Before using the product, read through the
user manual to ensure that you will use the product correctly.
Please keep this manual for future reference.
Features
•Cardioid condenser boundary microphone with switch
•Designed for surface-mount applications such as high-quality sound
reinforcement, professional recording, television, conferencing and other
demanding sound pickup situations
•The capacitive touch switch can be set to any of three operating modes:
“touch-on/touch-off”, “touch-to-talk” and “touch-to-mute”
•Integral, phantom-powered, two-state RGB LED indicator displays on/off status
of microphone
•PivotPoint™ rotating output connector allows cable to exit from either the rear
or the bottom of the microphone
•Superior off-axis rejection for maximum gain before feedback
•UniGuard™ RFI-shielding technology offers outstanding rejection of radio
frequency interference (RFI)
•Small-diameter UniPoint™ capsule near boundary eliminates phase distortion
and delivers clear, high-output performance
•Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling
of surface vibration to the microphone
•Low-profile design with low-reflectance finish for minimum visibility
•Threaded inserts on bottom of microphone allow it to be mounted with screws
for increased security
•Available in two colors: black (U891Rb) and white (U891RWb)
Connection procedure
Connect the output terminals of the microphone to a device that has a
microphone input (balanced input) compatible with a phantom power supply.
The output connector is an XLRM-type with polarity as shown in the gure below.
1 2
3
PIN1 (ground)
PIN3 (cold)
Output terminals
PIN2 (hot)
This product requires
phantom power.
Specifications
Element
Fixed-charge back plate, permanently polarized condenser
Polar pattern Cardioid
Frequency response 20 - 20,000 Hz
Low frequency roll-o 80 Hz, 18 dB/octave
Open circuit sensitivity -34 dB (19.9 mV) (0dB=1V/Pa, 1kHz)
Impedance 50 ohms
Maximum input sound level 130 dB SPL (1kHz at 1% THD)
Noise 26 dB SPL (A-weighted)
Dynamic range 104 dB (1kHz at Max SPL)
Signal-to-noise ratio 68 dB (1kHz at 1Pa, A-weighted)
Phantom power requirements 11 - 52 V DC, 9.3 mA
Switches Low cut: on/off; Switch function: touch on/off,
momentary on, momentary off
Weight 253 g (8.9 oz)
Dimensions 23 mm (0.91") × 83.9 mm (3.3") × 108 mm (4.25")
(H×W×D)
Output connector TB3M-type (Microphone)
3-pin XLRM-type (Cable)
Optional interchangeable elements UE-O omnidirectional (360°), UE-H hypercardioid (100°)
Included accessories
U891Rb: 7.6 m (24.9') Microphone black cable (TA3F,
XLRM), Pouch
U891RWb: 7.6 m (24.9') Microphone white cable (TA3F,
XLRM), Pouch
• 1 Pascal = 10 dynes/cm
2 = 10 microbars = 94 dB SPL
For product improvement, the product is subject to modication without notice.
Polar pattern
240˚
180˚
210˚
270˚
300˚
330˚
0˚
150˚
120˚
90˚
30˚
60˚
LEGEND
200Hz
1kHz
5kHz
8kHz
SCALE IS 5 DECIBELS PER DIVISION
Frequency response
10 dB
50 100 200 500 1k 2k 5k 10k 20k20
Frequency in Hertz
LEGEND
0°, 50 cm
0°, 50 cm, Low cut
Dimensions
50.2
50
83.9
108
23
57
2-M3 P=0.5
(Unit: mm)
Included accessories
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
Š2019 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Made in Japan 142419861-01-01 ver.1 2019.01.15


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: U891Rb

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica U891Rb benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung fĂźr -Kategorien-