Audio-Technica PRO49Q Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica PRO49Q (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
propoint® microphones
Cardioid Condenser Quick-Mount Gooseneck Microphones
PRO 49Q & PRO 49QL
Features
Quick-mount design with 3-pin XLRM-type connector insert at
base plugs into any standard XLRF-type surface or cable connector
Wide-range condenser element with low-mass diaphragm for
superior performance
Cardioid polar pattern with 120º acceptance angle
Self-contained electronics eliminate need for external
power modules
Flat, smooth frequency response
Quiet, xed-placement, long-life gooseneck
Foam windscreen offers resistance to P-pops and other breath blasts
Description
The PRO 49Q is a wide-range condenser microphone with a cardioid
polar pattern. It is designed to provide clear, intelligible sound
reproduction in a wide range of settings, such as conferences,
courtrooms, houses of worship and other demanding sound pickup
applications.
The small-diameter double gooseneck design permits highly exible
positioning while maintaining a smooth, well-contoured appearance. The
PRO 49Q stands 332.0 mm (13.07") from the table or podium; it is also
available in a 418.0 mm (16.46") version as PRO 49QL. The two models
are identical in all other respects.
The microphone requires 9V to 52V phantom power for operation.
The microphones cardioid polar pattern provides a 120° angle of acceptance.
An XLRM-type connector insert at the base allows the microphone to be
plugged directly into an XLRF-type panel jack or microphone cable.
The microphone comes equipped with a foam windscreen. The microphone
is enclosed in a rugged housing with a low-reectance black nish.
Installation and Operation
The PRO 49Q requires 9V to 52V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
The provided foam windscreen simply slips over the head of the
microphone, effectively reducing wind noise or popping.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Architects and Engineer’s Specications
The microphone shall be a xed-charge condenser designed for
permanent installation or portable applications. It shall have a cardioid
polar pattern with a uniform 120° angle of acceptance and a frequency
response of 70 Hz to 16,000 Hz. The microphone shall operate from
an external 9V to 52V DC phantom power source. It shall be capable
of handling sound input levels up to 134 dB with a dynamic range of
106 dB. Nominal open-circuit output voltage shall be 14.1 mV at 1V, 1
Pascal. Output shall be low impedance balanced (100 ohms).
The microphone shall incorporate a self-contained power module with an
XLRM-type connector at the base for direct connection to a mating XLRF-
type panel jack or cable connector.
A foam windscreen shall be included.
The microphone shall be a small-diameter alternating gooseneck design,
with an overall length of 332.0 mm (13.07") [418.0 mm (16.46")] and a
head diameter of 12.0 mm (0.47"). Weight shall be 80 grams (2.8 oz) [84
grams (3.0 oz)]. Finish shall be low-reectance black.
The Audio-Technica PRO 49Q [PRO 49QL] is specied.
PRO 49Q & PRO 49QL
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0134-01
Specications
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specications are subject to change without notice.
PRO 49Q PRO 49QL
LEGEND
200 Hz
1 kHz
5 kHz
8 kHzSCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
150˚
120˚
90˚
30˚
60˚
12" or more on axisLEGEND
Frequency in Hertz
Response in dB
10 dB
100
50 200 10k5k
1k
500 2k 20k
frequency response: 70–16,000 Hz
polar pattern
Fixed-charge back plate, permanently
polarized condenser
Cardioid
70-16,000 Hz
–37 dB (14.1 mV) re 1V at 1 Pa
100 ohms
134 dB SPL, 1 kHz at 1% T.H.D.
106 dB, 1 kHz at Max SPL
66 dB, 1 kHz at 1 Pa
9-52V DC, 2 mA typical
PRO 49Q: 80 g (2.8 oz)
PRO 49QL: 84 g (3.0 oz)
PRO 49Q: 332.0 mm (13.07") long,
12.0 mm (0.47") head diameter,
18.9 mm (0.74") base diameter
PRO 49QL: 418.0 mm (16.46") long,
12.0 mm (0.47") head diameter,
18.9 mm (0.74") base diameter
Integral 3-pin XLRM-type
M23
AT8146 windscreen
Element
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Dynamic range (typical)
Signal-to-noise ratio
Phantom power requirements
Weight
Dimensions
Output connector
Audio-Technica case style
Accessory furnished
289


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: PRO49Q

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica PRO49Q benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-