Audio-Technica Pro 92cW Bedienungsanleitung

Audio-Technica Mikrofon Pro 92cW

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica Pro 92cW (1 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

pro series microphones

PRO 92cW & PRO 92cW-TH

Omnidirectional Condenser Wireless Headworn Microphones

Features

• Designed for lecturers, presenters, houses of worship and other

applications requiring clear, articulate vocal reproduction

• Flexible, contoured loop hooks over either ear for a comfortable t

• Natural, smooth frequency response optimized for vocal

reproduction

• Rugged construction designed to meet the challenges of day-to-

day use

• Offered in black and beige (-TH) models

• Terminated for use with all Audio-Technica UniPak® wireless

systems

Description

The PRO 92cW is a headworn condenser microphone with an

omnidirectional polar pattern. It is designed to provide articulate vocal

reproduction for lecturers, presenters and houses of worship.

The microphone includes a 1.4 m (55") permanently attached miniature

cable. Its free end terminates in a locking 4-pin connector for use with

Audio-Technica UniPak® body-pack transmitters.

The microphone comes equipped with a windscreen, a cable clip and a

carrying pouch. The microphone is available in black and beige.

Operation and Maintenance

The exible design of the PRO 92cW enables it to be worn on either

the left or right ear. Position the lightweight contoured earpiece around

your ear, so that the boom extends from the top of your ear. Remove the

PRO 92cW and bend a gentle curve in the microphone’s boom to follow the

contour of your face. Again, hook the earpiece around your ear, adjusting the

earpiece and boom as needed to achieve a secure, comfortable t, so that

the microphone is not dislodged by shaking your head.

A cable clip is provided for strain relief, allowing the microphone to

remain securely in place without the weight of the cable pulling on the

headset. To install the cable clip, slip the cable into the snap-on connector

and attach the clip to clothing, leaving enough slack on the microphone

side of the clip to allow for free, comfortable motion.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 110° F (43° C) for extended periods. Extremely high

humidity should also be avoided.

Architect’s and Engineer’s Specications

The microphone shall be a xed-charge condenser designed for

headworn use. It shall have an omnidirectional polar pattern and a

frequency response of 20 Hz to 20,000 Hz. It shall be capable of handling

sound input levels up to 116 dB. Nominal open-circuit output voltage shall

be 5.6 mV at 1V, 1 Pascal.

The microphone shall have a 1.4 m (55") permanently attached miniature

cable terminating in a locking 4-pin output connector for use with

Audio-Technica UniPak® body-pack transmitters.

The microphone shall be a headworn design with an element diameter of

9.2 mm (0.36"). Microphone and boom weight shall be 4 grams (0.14 oz).

The microphone shall include a cable clip, a windscreen and a carrying

pouch. Finish shall be black [beige].

The Audio-Technica PRO 92cW [PRO 92cW-TH] is specied.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

Specications

Function

Pin 1 Ground/Shield

Pin 2 Instrument

Pin 3 Mic Audio

Pin 4 Bias + In

cW, cW-TH

Condenser

Omnidirectional

20-20,000 Hz

–45 dB (5.6 mV) re 1V at 1 Pa

116 dB SPL, 1 kHz at 1% T.H.D.

60 dB, 1 kHz at 1 Pa

0.3 mA typical at 5V

1.5-9V

Microphone & boom: 4 g (0.14 oz)

Microphone, boom, connector & cable:

24 g (0.84 oz)

Microphone: 21.7 mm (0.85") long,

9.2 mm (0.36") diameter

Boom: 110.0 mm (4.33") long,

2.4 mm (0.09") boom diameter

1.4 m (55") terminated with locking 4-pin

connector for use with A-T UniPak®

body-pack transmitters

M38

AT8442 cable clip; AT8158 windscreen;

carrying pouch

Element

Polar pattern

Frequency response

Open circuit sensitivity

Maximum input sound level

Signal-to-noise ratio1

Current Consumption

Voltage Range

Weight

Dimensions

Cable

Audio-Technica case style

Accessories furnished

In the interest of standards development, A.T.U.S.

offers full details on its test methods to other industry

professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1 Typical, A-weighted, using Audio Precision System One.

Specications are subject to change without notice.

LEGEND

200 Hz

1 kHz

5 kHz

8 kHzSCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚

0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axisLEGEND

Frequency in Hertz

Response in dB

10 dB

100

50 200 10k5k1k500 2k 20k

Roll-off

frequency response: 20–20,000 Hz

polar pattern

Produktspezifikationen

Marke:	Audio-Technica
Kategorie:	Mikrofon
Modell:	Pro 92cW
Gewicht:	24 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Energiequelle:	Gleichstrom
Kabellänge:	1.4 m
Geräteschnittstelle:	4-pin Hirose
Energieverbrauch:	0.3 mA
Mikrofon-Frequenz:	20 - 20000 Hz
Mikrofon-Empfindlichkeit:	-45 dB
Ausrichtung des integrierten Mikrofons:	Omnidirektional
Tragetasche:	Ja
Mikrofon Klirrfaktor (THD):	1 %
Eingangsspannung:	1.5 - 9 V
Samplerate:	1 kHz
Windschutzscheibe enthalten:	Ja
Mikrofon Signal-to-Noise Ratio (SNR):	60 dB
Empfindlichkeit (1kHz):	5.6 mV/Pa
Mikrofon-Stoßhalterung enthalten:	Ja
Maximaler Schalldruckpegel (1kHz):	116 dB