Audio-Technica ATW-1311 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Audio-Technica ATW-1311 (12 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war fĂŒr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
System 10 PRO
Digital Wireless System
Installation and Operation
ATW-1301
UniPakÂź Transmitter System
ATW-1301/L
Lavalier Microphone System
ATW-1302
Handheld Microphone System
ATW-1311
Dual UniPakÂź Transmitter System
ATW-1311/L
Dual Lavalier Microphone System
ATW-1312
UniPakÂź/Handheld Combo System
ATW-1312/L
Lavalier/Handheld Combo System
ATW-1322
Dual Handheld Microphone System
System 10 PRO Installation and Operation
2
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil umerique de la
classe B est conforme a la norme NMB-003 du Canada.
CAUTION! Electrical shock can result from removal of the receiver chassis cover. Refer
to rain or moisture. The circuits inside the chassis, receivers and transmitters have been
precisely adjusted for optimum performance and compliance with federal regulations. Do not
attempt to open the chassis, receivers or transmitters. To do so will void the warranty, and
may cause improper operation.
Notice to individuals with implanted cardiac pacemakers or AICD devices: Any
source of RF (radio frequency) energy may interfere with normal functioning of the implanted
device. All wireless microphones have low-power transmitters (less than 0.05 watts output)
However, since a “body-pack” mic transmitter typically is placed against the body, we suggest
attaching it at the belt, rather than in a shirt pocket where it may be immediately adjacent
to the medical device. Note also that any medical-device disruption will cease when the RF
transmitting source is turned off. Please contact your physician or medical-device provider
if you have any questions, or experience any problems with the use of this or any other RF
equipment.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
9. r rUnplug this appa atus during lightning storms or when unused fo long periods of time.
10.
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Thank you for choosing an Audio-Technica System 10 PRO Rack-Mount
customers who h e chosen our products because of their quality, av
performance and reliability. This wireless microphone system is the
successful result of years of design and manufacturing experience.
Audio-Technica’s System 10 PRO Rack-Mount is a digital wireless
system designed to provide rock-solid performance along with easy
setup and clear, natural sound quality. Featuring a dual-receiver chassis
and remote-mount receiver unit capability, System 10 PRO Rack-Mount
in the 2.4 GHz range, far from TV and DTV interference, System 10
PRO Rack-Mount offers extremely easy operation and instantaneous
channel selection. Up to ten channels may be used together without
any frequency coordination problems or group selection issues.
System 10 wireless ensures clear communications by providing three
l els of diversity assurance: frequency, time, and space. Frequency ev
Diversity sends the signal on two dynamically allocated frequencies
for interference-free communication. Time Diversity sends the signal
in multiple time slots to maximize immunity to multi-path interference.
Finally, Space Diversity uses two antennas on each transmitter and
receiver to maximize signal integrity.
CAUTION
RI ELSK OF ECTRIC SHOCK
D OO N T OPEN
WARNING: TO RE E THE RI K OF FIRE OR ELECTRIDUC S C SH CK, DO O NOT REMOVE SCREWS.
NO SER-SE ICE P U RV ABLE ARTS INSIDE.REFE VICINR R SE G A RSONN . TO QU LIFIED SE ICE PERV EL
WARNING: TO RE E THE RI K OF FIRE OR ELECTRIDUC S C SH CK, DO OT E E TO N XPOS HE
APPLIAN O RCE T AIN OIS RE.OR M TU
CERTIFICATI :ON THIS DEV W PAR OICE COMPLIES ITH T 15 F THE FC . TC RULES HIS EVID CE
CO DUMPLIES WITH IN STR NAD - S STAND D(S O RAY CA A LICENSE EXEMPT RS AR ). PE TION S I
SUBJECT TO THE FO OLL WING TWO C D O ON ITI NS: (1) THIS ICE DEV MAY NO UST CA E HARMFUL
IN R NTE FERE CE, AND D (2) THIS EVI CEPT C U CE M ST A A NNY I TERFERENCE ECEIR VED,
IN U GCL DIN IN R RETE FE NCE THAT MAY N O A CAUSE U DESIRED PER TION.
C t for / r N Cet appareil es con me à la aux no me(s) C R exempte(s) de licence d’Industrie anada.
S f ton onctionnement est soumis aux deux conditions suivan es : (1) ce appa eil ne doit pat r s
causer d’inte Ă©rrf ence e (2) cet appa eil doit accepter toutes les interfĂ© ences, y compris cellet r r s
suscept té.ibles de provoquer un fonctionnement non souhai
Under Industry Canada r r f egulations, this adio transmitter may only operate using an antenna o
a type and maximum (o lesser) gain app oved for the transmi ter by Indus y Canada. r r t tr To educr e
potential radio inte ference to othe users, he anr r t tenna t t n ype and i s gain should be so chose
t tha the equivalent isotr t r ropically radia ed powe (e.i. .p.) is not more than hat necessa y fot r r
successful communication.
C r ' tonformément à la églementation d Indus rie C r t anada, le présent émetteu radio peu
f t t tonc ionner avec une an enne d'un ype e un gain maximal (ou inférieu ) approuvé pout ' d r r
l' témet eur par Industrie C t r ranada. Dans le bu de réduire les isques de b ouillage r r e adioélect iqu
Ă  l ention des au res u'int t tilisa eut r f a s, il aut choisir le type d'antenne et son gain de sorte que l
puissance iso ope rayonnée équivalente (p.i.tr r.e.) ne dépasse pas l'in ensité nécessait re à
l'Ă©tablissement d une communication sa' tisfaisante.
WARNING: Changes or modications not expressly approved in writing by Audio-Technica may
void the user’s authority t .o operate this equipment
RF Exposure teSta ment: This transmitter t r t n must not be co-loca ed or ope ated in conjunc io
with any other an enna ot r r t ansmitt r . er used in othe systems
The ATW- CRU13 complies with FC /IC t r t f radia ion exposu e limi s set or h t for d an uncontrolle
envi s r tonment and mee the FCC radio frequency ( F) Exposu uidelines and R re G RSS- f the 102 o
IC f R radio requency ( F) Exposure ules. This equipment has very low levels o F ener f R rgy t t hat i
deemed to comply wi maximum pe missive exposure evaluation. (thout r MPE). ablB t rut i is desi e
t t tha i should be ins alled and operated keeping the radiat tor at r r m least 20cm o mo e away fro
person’s body.
Le ATW-R 3 conforme aux limites d’exposition aux rayonnements Ă©noncĂ©es pour U1
un environnement non contrĂŽlĂ© et respecte les rĂšgles d’exposition aux frĂ©quences
radioĂ©lectriques (RF) CNR-102 de l’IC. Cet Ă©quipement Ă©met une Ă©nergie RF trĂšs faible qui
est considĂ©rĂ©e conforme sans Ă©valuation de l ’exposition maximale autorisĂ©e. Cependant, il
est souhaitable qu'il devrait ĂȘtre installĂ© et utilisĂ© en gardant une distance de 20 cm ou plus
entre le dispositif rayonnant et le corps.
using low powe wi eless devices. The e is no proof, however r r r, hat t these low powe wirelesr s
devices are absolutely sa e. Low power ireless devices emit low levels o radio f W f frequency
energy (RF) in the mic ange while being used. Whereas high levels orowave r f R r e F can p oduc
heal fect fh e t ts (by hea ing t r t rissue), exposu e of low-level RF hat does not p oduce hea ing effect ts
cause no known adverse heal h ef ects. Many s udies ot f t f low level RF exposu es have no- r t found
any biological effects. Some studies have suggested hat some biological effects migh occut t r
been tested and o comply with FCC/Ifound t C radia ion exposure limits set th fo an uncot four r n-
trolled environmen and meet ts the FCC radio frequency ( F) Exposu uidelines and R re G RSS- f 102 o
t R r .he IC radio equency (fr F) Exposu e rules
f r taible dans le spec e des mictr o-ondes lorsque' ils son ut e ilisés. Alors qu' une dose élevée d
R t r et t ' f i F peu avoi des eff s sur la santé (en chauffan les tissus), l exposition à de aibles RF qu
ne p pas de chaleur n a pas de mauvais effets connus sur la sanroduisent ' té. euseD re nomb s
ét t tudes ont é é menées sur les expositions aux RF faibles et n' on découve t aucun effer t
biologique. Cer aines é udes ont suggéré qu il pouvait t ' t y avoir ce tains effe s biologiques, mair t s
T1002 a été esté e jugé con orme aux limites d' exposition aux rayonnement t f ts énoncées pour
un environnemen non con rÎlé et respecte les Úgles les t t r radioélect R C s riques ( F) de la FC ligne
directr t t rices d'exposi ion e d' exposition aux f équences adioélecr t CNR ' .riques (RF) -102 de l IC
Note:
The ATW-RC13 has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
.
.
11. The rating label is put on the bottom of this apparatus.
Battery caution
Do not expose the battery to excessive heat such as sunshine, re or the like.
Always consider the environmental issues and follow local regulations when disposing of batteries.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
System 10 PRO Installation and Operation
3
Because System 10 packaging is designed to hold all versions of
the system, some compartments in the carton may be intentionally
left empty.
The ATW-R1300 includes a switching p er supply that automatically ow
adapts to changes in mains voltage.
Âź body-pack transmitter has both a high-The versatile ATW-T1001 UniPak
impedance input for instruments, and a low-impedance input with bias
connection for use with dynamic and electret condenser microphones.
The ATW-T1002 handheld transmitter features a unidirectional dynamic
microphone element.
Both the body-pack and handheld transmitters use internal AA batteries
and have Power/Mute switches and input Trim (level) adjustments.
Installation
Receiver Unit Location
sight of tra mins tter d fran away om any large obstruc Ktions. eep the
recei erv uni y omt awa fr noi rcse ou s e cs su h as other digi al wirelest s
equipmen e t, microwav ovens, s a we awa t . ll as y from large me al objects
Kee Sp ys m te 10 re ivce ers 30 ' (9 m) away f om wr ireless access points.
Output Connection
The ATW-R1300 is equipped with two audio outputs for each receiver:
a balanced XLR-type output and an unbalanced Œ" TRS phone jack. Use
shielded audio cable for the connection between the receiver and the
mixer. If the input of the mixer is a Œ" jack, connect a cable from the
Œ" unbalanced audio output on the back of the receiver chassis to the
mixer. If the input of the mixer is an XLR-type input, connect a cable
from the balanced XLR-type audio output on the back of the chassis to
the mixer.
Power Connection
Connect the DC plug on the included AC p er adapter to the DC ow
p er input on the back of the receiver chassis. Secure the cord er ow ov
the cord hook on the chassis to keep the plug from being accidentally
dislodged. Plug the adapter into a standard 120 Volt 60 Hz AC power
outlet. The receiver chassis is equipped with a power On/Off switch.
Turn the p er off when system is not in use, and unplug the p er ow ow
supply if you expect not to use the system for an extended period.
Antennas
For best reception, position the rem able antennas in the shape of a ov
“V” so that both tilt 45°.
Link Connection
When using multiple systems together it is strongly recommended
with each system. (Linking is not necessary if you are using only a
single chassis.) Linking creates a much more stable environment in
which receivers work together, with all receiving, transmitting and
frequency allocation coordinated to pr ent audio dropouts and enable ev
simultaneous use of up to 10 channels. See “Linking Systems” on page
9 for more details.
ATW-RC13 Receiver Chassis Controls and Functions
Figure A — Front Panel Controls and Functions
1. Power Switch: Press to turn p er on and off.ow
2.
service technician.
3. Receiver Unit Docks: Insert individual receivers to use them locally.
4. Receiver Unit Releases: Press to eject receivers.
5. Audio Indicator (one for each receiver): Illuminates green when
sound is received from transmitter, yellow when audio is nearing
peak level, and red when peak level is reached.
6. Pairing Indicator (one for each receiver): Flashes green in pair mode;
illuminates solidly green once transmitter is paired.
Figure A
7. System ID Select Switch (one for each receiver): Press to cycle
through System ID numbers. (System ID is a shared number
purposes.)
8. Pairing Switch (one for each receiver): Press to initiate pairing.
9. System ID Display includes the following:
a. RF Signal el Indicator (one for each receiver): Shows strength Lev
of the RF signal received from the transmitter
b. System ID (one for each receiver): Shows the System
ID number
c. Transmitter Battery Gauge TX (one for each receiver): Shows
the capacity of the transmitter’s batteries
d. Link Indicator: Shows that the chassis has been linked to
another chassis
2
931 5
6 7 8
d
c
b
a
4
one or two receiver units that may be docked in the chassis or
mounted remotely, and one or two transmitters of either the handheld
also include one or two l alier mics that attach to the body-pack av
included RJ12 cable to allow for simultaneous use of all receivers and
increased stability of the multi-channel system.
includes a rack-mountable receiver chassis with two receiver unit


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: ATW-1311

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica ATW-1311 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung fĂŒr -Kategorien-