Audio-Technica ATW-1301 Bedienungsanleitung
Audio-Technica
Mikrofon
ATW-1301
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Audio-Technica ATW-1301 (12 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
System 10 PRO
Digital Wireless System
Installation and Operation
ATW-1301
UniPak® Transmitter System
ATW-1301/L
Lavalier Microphone System
ATW-1302
Handheld Microphone System
ATW-1311
Dual UniPak® Transmitter System
ATW-1311/L
Dual Lavalier Microphone System
ATW-1312
UniPak®/Handheld Combo System
ATW-1312/L
Lavalier/Handheld Combo System
ATW-1322
Dual Handheld Microphone System
System 10 PRO Installation and Operation
2
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil umerique de la
classe B est conforme a la norme NMB-003 du Canada.
CAUTION! Electrical shock can result from removal of the receiver chassis cover. Refer
to rain or moisture. The circuits inside the chassis, receivers and transmitters have been
precisely adjusted for optimum performance and compliance with federal regulations. Do not
attempt to open the chassis, receivers or transmitters. To do so will void the warranty, and
may cause improper operation.
Notice to individuals with implanted cardiac pacemakers or AICD devices: Any
source of RF (radio frequency) energy may interfere with normal functioning of the implanted
device. All wireless microphones have low-power transmitters (less than 0.05 watts output)
However, since a “body-pack” mic transmitter typically is placed against the body, we suggest
attaching it at the belt, rather than in a shirt pocket where it may be immediately adjacent
to the medical device. Note also that any medical-device disruption will cease when the RF
transmitting source is turned off. Please contact your physician or medical-device provider
if you have any questions, or experience any problems with the use of this or any other RF
equipment.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
9. r rUnplug this appa atus during lightning storms or when unused fo long periods of time.
10.
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Thank you for choosing an Audio-Technica System 10 PRO Rack-Mount
customers who h e chosen our products because of their quality, av
performance and reliability. This wireless microphone system is the
successful result of years of design and manufacturing experience.
Audio-Technica’s System 10 PRO Rack-Mount is a digital wireless
system designed to provide rock-solid performance along with easy
setup and clear, natural sound quality. Featuring a dual-receiver chassis
and remote-mount receiver unit capability, System 10 PRO Rack-Mount
in the 2.4 GHz range, far from TV and DTV interference, System 10
PRO Rack-Mount offers extremely easy operation and instantaneous
channel selection. Up to ten channels may be used together without
any frequency coordination problems or group selection issues.
System 10 wireless ensures clear communications by providing three
l els of diversity assurance: frequency, time, and space. Frequency ev
Diversity sends the signal on two dynamically allocated frequencies
for interference-free communication. Time Diversity sends the signal
in multiple time slots to maximize immunity to multi-path interference.
Finally, Space Diversity uses two antennas on each transmitter and
receiver to maximize signal integrity.
includes a rack-mountable receiver chassis with two receiver unit
CAUTION
RI ELSK OF ECTRIC SHOCK
D OO N T OPEN
WARNING: TO RE E THE RI K OF FIRE OR ELECTRIDUC S C SH CK, DO O NOT REMOVE SCREWS.
NO SER-SE ICE P U RV ABLE ARTS INSIDE.REFE VICINR R SE G A RSONN . TO QU LIFIED SE ICE PERV EL
WARNING: TO RE E THE RI K OF FIRE OR ELECTRIDUC S C SH CK, DO OT E E TO N XPOS HE
APPLIAN O RCE T AIN OIS RE.OR M TU
CERTIFICATI :ON THIS DEV W PAR OICE COMPLIES ITH T 15 F THE FC . TC RULES HIS EVID CE
CO DUMPLIES WITH IN STR NAD - S STAND D(S O RAY CA A LICENSE EXEMPT RS AR ). PE TION S I
SUBJECT TO THE FO OLL WING TWO C D O ON ITI NS: (1) THIS ICE DEV MAY NO UST CA E HARMFUL
IN R NTE FERE CE, AND D (2) THIS EVI CEPT C U CE M ST A A NNY I TERFERENCE ECEIR VED,
IN U GCL DIN IN R RETE FE NCE THAT MAY N O A CAUSE U DESIRED PER TION.
C t for / r N Cet appareil es con me à la aux no me(s) C R exempte(s) de licence d’Industrie anada.
S f ton onctionnement est soumis aux deux conditions suivan es : (1) ce appa eil ne doit pat r s
causer d’inte érrf ence e (2) cet appa eil doit accepter toutes les interfé ences, y compris cellet r r s
suscept té.ibles de provoquer un fonctionnement non souhai
Under Industry Canada r r f egulations, this adio transmitter may only operate using an antenna o
a type and maximum (o lesser) gain app oved for the transmi ter by Indus y Canada. r r t tr To educr e
potential radio inte ference to othe users, he anr r t tenna t t n ype and i s gain should be so chose
t tha the equivalent isotr t r ropically radia ed powe (e.i. .p.) is not more than hat necessa y fot r r
successful communication.
C r ' tonformément à la églementation d Indus rie C r t anada, le présent émetteu radio peu
f t t tonc ionner avec une an enne d'un ype e un gain maximal (ou inférieu ) approuvé pout ' d r r
l' témet eur par Industrie C t r ranada. Dans le bu de réduire les isques de b ouillage r r e adioélect iqu
Ă l ention des au res u'int t tilisa eut r f a s, il aut choisir le type d'antenne et son gain de sorte que l
puissance iso ope rayonnĂ©e Ă©quivalente (p.i.tr r.e.) ne dĂ©passe pas l'in ensitĂ© nĂ©cessait re Ă
l'Ă©tablissement d une communication sa' tisfaisante.
WARNING: Changes or modications not expressly approved in writing by Audio-Technica may
void the user’s authority t .o operate this equipment
RF Exposure teSta ment: This transmitter t r t n must not be co-loca ed or ope ated in conjunc io
with any other an enna ot r r t ansmitt r . er used in othe systems
The ATW- CRU13 complies with FC /IC t r t f radia ion exposu e limi s set or h t for d an uncontrolle
envi s r tonment and mee the FCC radio frequency ( F) Exposu uidelines and R re G RSS- f the 102 o
IC f R radio requency ( F) Exposure ules. This equipment has very low levels o F ener f R rgy t t hat i
deemed to comply wi maximum pe missive exposure evaluation. (thout r MPE). ablB t rut i is desi e
t t tha i should be ins alled and operated keeping the radiat tor at r r m least 20cm o mo e away fro
person’s body.
Le ATW-R 3 conforme aux limites d’exposition aux rayonnements énoncées pour U1
un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l ’exposition maximale autorisée. Cependant, il
est souhaitable qu'il devrait être installé et utilisé en gardant une distance de 20 cm ou plus
entre le dispositif rayonnant et le corps.
using low powe wi eless devices. The e is no proof, however r r r, hat t these low powe wirelesr s
devices are absolutely sa e. Low power ireless devices emit low levels o radio f W f frequency
energy (RF) in the mic ange while being used. Whereas high levels orowave r f R r e F can p oduc
heal fect fh e t ts (by hea ing t r t rissue), exposu e of low-level RF hat does not p oduce hea ing effect ts
cause no known adverse heal h ef ects. Many s udies ot f t f low level RF exposu es have no- r t found
any biological effects. Some studies have suggested hat some biological effects migh occut t r
been tested and o comply with FCC/Ifound t C radia ion exposure limits set th fo an uncot four r n-
trolled environmen and meet ts the FCC radio frequency ( F) Exposu uidelines and R re G RSS- f 102 o
t R r .he IC radio equency (fr F) Exposu e rules
f r taible dans le spec e des mictr o-ondes lorsque' ils son ut e ilisés. Alors qu' une dose élevée d
R t r et t ' f i F peu avoi des eff s sur la santé (en chauffan les tissus), l exposition à de aibles RF qu
ne p pas de chaleur n a pas de mauvais effets connus sur la sanroduisent ' té. euseD re nomb s
ét t tudes ont é é menées sur les expositions aux RF faibles et n' on découve t aucun effer t
biologique. Cer aines é udes ont suggéré qu il pouvait t ' t y avoir ce tains effe s biologiques, mair t s
T1002 a été esté e jugé con orme aux limites d' exposition aux rayonnement t f ts énoncées pour
un environnemen non con rôlé et respecte les ègles les t t r radioélect R C s riques ( F) de la FC ligne
directr t t rices d'exposi ion e d' exposition aux f équences adioélecr t CNR ' .riques (RF) -102 de l IC
Note:
The ATW-RC13 has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
.
.
System 10 PRO Installation and Operation
3
one or two receiver units that may be docked in the chassis or
mounted remotely, and one or two transmitters of either the handheld
also include one or two l alier mics that attach to the body-pack av
included RJ12 cable to allow for simultaneous use of all receivers and
increased stability of the multi-channel system.
Because System 10 packaging is designed to hold all versions of
the system, some compartments in the carton may be intentionally
left empty.
The ATW-R1300 includes a switching p er supply that automatically ow
adapts to changes in mains voltage.
The versatile ATW-T1001 UniPak
® body-pack transmitter has both a high-
impedance input for instruments, and a low-impedance input with bias
connection for use with dynamic and electret condenser microphones.
The ATW-T1002 handheld transmitter features a unidirectional dynamic
microphone element.
Both the body-pack and handheld transmitters use internal AA batteries
and have Power/Mute switches and input Trim (level) adjustments.
Installation
Receiver Unit Location
sight of tra mins tter d fran away om any large obstruc Ktions. eep the
recei erv uni y omt awa fr noi rcse ou s e cs su h as other digi al wirelest s
equipmen e t, microwav ovens, s a we awa t . ll as y from large me al objects
Kee Sp ys m te 10 re ivce ers 30 ' (9 m) away f om wr ireless access points.
Output Connection
The ATW-R1300 is equipped with two audio outputs for each receiver:
a balanced XLR-type output and an unbalanced ÂĽ" TRS phone jack. Use
shielded audio cable for the connection between the receiver and the
mixer. If the input of the mixer is a ÂĽ" jack, connect a cable from the
ÂĽ" unbalanced audio output on the back of the receiver chassis to the
mixer. If the input of the mixer is an XLR-type input, connect a cable
from the balanced XLR-type audio output on the back of the chassis to
the mixer.
Power Connection
Connect the DC plug on the included AC p er adapter to the DC ow
p er input on the back of the receiver chassis. Secure the cord er ow ov
the cord hook on the chassis to keep the plug from being accidentally
dislodged. Plug the adapter into a standard 120 Volt 60 Hz AC power
outlet. The receiver chassis is equipped with a power On/Off switch.
Turn the p er off when system is not in use, and unplug the p er ow ow
supply if you expect not to use the system for an extended period.
Antennas
For best reception, position the rem able antennas in the shape of a ov
“V” so that both tilt 45°.
Link Connection
When using multiple systems together it is strongly recommended
with each system. (Linking is not necessary if you are using only a
single chassis.) Linking creates a much more stable environment in
which receivers work together, with all receiving, transmitting and
frequency allocation coordinated to pr ent audio dropouts and enable ev
simultaneous use of up to 10 channels. See “Linking Systems” on page
9 for more details.
ATW-RC13 Receiver Chassis Controls and Functions
Figure A — Front Panel Controls and Functions
1. Power Switch: Press to turn p er on and off.ow
2.
service technician.
3. Receiver Unit Docks: Insert individual receivers to use them locally.
4. Receiver Unit Releases: Press to eject receivers.
5. Audio Indicator (one for each receiver): Illuminates green when
sound is received from transmitter, yellow when audio is nearing
peak level, and red when peak level is reached.
6. Pairing Indicator (one for each receiver): Flashes green in pair mode;
illuminates solidly green once transmitter is paired.
Figure A
7. System ID Select Switch (one for each receiver): Press to cycle
through System ID numbers. (System ID is a shared number
purposes.)
8. Pairing Switch (one for each receiver): Press to initiate pairing.
9. System ID Display includes the following:
a. RF Signal el Indicator (one for each receiver): Shows strength Lev
of the RF signal received from the transmitter
b. System ID (one for each receiver): Shows the System
ID number
c. Transmitter Battery Gauge TX (one for each receiver): Shows
the capacity of the transmitter’s batteries
d. Link Indicator: Shows that the chassis has been linked to
another chassis
2
931
4
5
6 7 8
d
b
c
a
Produktspezifikationen
Marke: | Audio-Technica |
Kategorie: | Mikrofon |
Modell: | ATW-1301 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Audio-Technica ATW-1301 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrofon Audio-Technica
12 Oktober 2024
8 Oktober 2024
7 Oktober 2024
5 Oktober 2024
3 Oktober 2024
14 September 2024
12 September 2024
11 September 2024
7 September 2024
4 September 2024
Bedienungsanleitung Mikrofon
- Mikrofon Connect IT
- Mikrofon Gembird
- Mikrofon Hama
- Mikrofon HyperX
- Mikrofon Logitech
- Mikrofon Manhattan
- Mikrofon Manta
- Mikrofon Nacon
- Mikrofon Nedis
- Mikrofon NGS
- Mikrofon Niceboy
- Mikrofon Philips
- Mikrofon Sandberg
- Mikrofon Sharkoon
- Mikrofon Sony
- Mikrofon T'nB
- Mikrofon Trust
- Mikrofon Panasonic
- Mikrofon Roland
- Mikrofon Canon
- Mikrofon Yamaha
- Mikrofon Yealink
- Mikrofon Neumann
- Mikrofon Technaxx
- Mikrofon Day
- Mikrofon Denver
- Mikrofon König
- Mikrofon Renkforce
- Mikrofon Telefunken
- Mikrofon Thomson
- Mikrofon Trevi
- Mikrofon Blaupunkt
- Mikrofon Triton
- Mikrofon Pyle
- Mikrofon Golden Age Project
- Mikrofon AKG
- Mikrofon Auna
- Mikrofon Beyerdynamic
- Mikrofon Bose
- Mikrofon Lenco
- Mikrofon Creative
- Mikrofon Jabra
- Mikrofon JBL
- Mikrofon Sennheiser
- Mikrofon Shure
- Mikrofon Max
- Mikrofon Olympus
- Mikrofon Tascam
- Mikrofon Zoom
- Mikrofon Bigben
- Mikrofon Plantronics
- Mikrofon Turtle Beach
- Mikrofon Fenton
- Mikrofon OneConcept
- Mikrofon TOA
- Mikrofon American DJ
- Mikrofon Gemini
- Mikrofon Power Dynamics
- Mikrofon Razer
- Mikrofon Samson
- Mikrofon Skytec
- Mikrofon Vonyx
- Mikrofon Peavey
- Mikrofon Marshall Electronics
- Mikrofon Karma
- Mikrofon Atlas
- Mikrofon DJI
- Mikrofon AVerMedia
- Mikrofon President
- Mikrofon Phonak
- Mikrofon Vtech
- Mikrofon Easypix
- Mikrofon Rollei
- Mikrofon Genesis
- Mikrofon Techly
- Mikrofon NZXT
- Mikrofon Behringer
- Mikrofon IMG Stageline
- Mikrofon Mackie
- Mikrofon Numark
- Mikrofon Omnitronic
- Mikrofon ESI
- Mikrofon Marantz
- Mikrofon Monoprice
- Mikrofon Monacor
- Mikrofon TEAC
- Mikrofon Hohner
- Mikrofon United
- Mikrofon Reloop
- Mikrofon TC Helicon
- Mikrofon Majority
- Mikrofon RCF
- Mikrofon Electro-Voice
- Mikrofon Joby
- Mikrofon Tracer
- Mikrofon Boss
- Mikrofon American Audio
- Mikrofon Godox
- Mikrofon Alto
- Mikrofon Kopul
- Mikrofon Chord
- Mikrofon GVM
- Mikrofon Saramonic
- Mikrofon Peerless-AV
- Mikrofon Vaddio
- Mikrofon JLab
- Mikrofon Galaxy Audio
- Mikrofon HQ Power
- Mikrofon Countryman
- Mikrofon Blue Microphones
- Mikrofon Warm Audio
- Mikrofon Speed-Link
- Mikrofon Line 6
- Mikrofon Bogen
- Mikrofon Nuance
- Mikrofon Radial Engineering
- Mikrofon DPA
- Mikrofon Azden
- Mikrofon Sven
- Mikrofon Austrian Audio
- Mikrofon Pyle Pro
- Mikrofon PreSonus
- Mikrofon Qtx
- Mikrofon Hähnel
- Mikrofon ART
- Mikrofon Senal
- Mikrofon Rode
- Mikrofon LD Systems
- Mikrofon Dörr
- Mikrofon IK Multimedia
- Mikrofon Midas
- Mikrofon Simplecom
- Mikrofon Ambient Recording
- Mikrofon Apogee
- Mikrofon TeachLogic
- Mikrofon Krom
- Mikrofon Elgato
- Mikrofon Chandler
- Mikrofon DAP
- Mikrofon DAP Audio
- Mikrofon IDance
- Mikrofon JB Systems
- Mikrofon Joy-it
- Mikrofon M-Audio
- Mikrofon Neewer
- Mikrofon ONYX
- Mikrofon Pure Acoustics
- Mikrofon Sonuus
- Mikrofon Steren
- Mikrofon Harley Benton
- Mikrofon Wharfedale
- Mikrofon Universal Audio
- Mikrofon Aston
- Mikrofon Singing Machine
- Mikrofon Epcom
- Mikrofon Adastra
- Mikrofon Clockaudio
- Mikrofon ITek
- Mikrofon Tula
- Mikrofon MXL
- Mikrofon APart
- Mikrofon Fun Generation
- Mikrofon Blue
- Mikrofon Hollyland
- Mikrofon Celly
- Mikrofon Proel
- Mikrofon Speco Technologies
- Mikrofon Polsen
- Mikrofon Vocopro
- Mikrofon Aluratek
- Mikrofon Comica
- Mikrofon IMG Stage Line
- Mikrofon Atlas Sound
- Mikrofon Eikon
- Mikrofon DB Technologies
- Mikrofon Palmer
- Mikrofon ViolaWave
- Mikrofon BOYA
- Mikrofon Audient
- Mikrofon Lectrosonics
- Mikrofon Konig & Meyer
- Mikrofon Sanken
- Mikrofon Citronic
- Mikrofon SPL
- Mikrofon Brigmton
- Mikrofon Axis
- Mikrofon Nady
- Mikrofon Xtreme
- Mikrofon Audac
- Mikrofon Vexus
- Mikrofon Crestron
- Mikrofon PSSO
- Mikrofon Synco
- Mikrofon Antelope Audio
- Mikrofon Catchbox
- Mikrofon Bontempi
- Mikrofon Audix
- Mikrofon Kurzweil
- Mikrofon Lewitt
- Mikrofon JTS
- Mikrofon Gravity
- Mikrofon Shadow
- Mikrofon Schertler
- Mikrofon Artsound
- Mikrofon Rolls
- Mikrofon Kali Audio
- Mikrofon The T.bone
- Mikrofon Manley
- Mikrofon Thronmax
- Mikrofon Klark Teknik
- Mikrofon AVMATRIX
- Mikrofon ANT
- Mikrofon Schoeps
- Mikrofon CAD Audio
- Mikrofon SE Electronics
- Mikrofon NOX
- Mikrofon Ultimate Support
- Mikrofon Deity
- Mikrofon Majestic
- Mikrofon Point Source Audio
- Mikrofon AmpliVox
- Mikrofon Earthworks
- Mikrofon Relacart
- Mikrofon Auray
- Mikrofon Mars Gaming
- Mikrofon Fishman
- Mikrofon Eurosound
- Mikrofon Aston Microphones
- Mikrofon Williams Sound
- Mikrofon Easyrig
- Mikrofon Mojave
- Mikrofon JZ Microphones
- Mikrofon Soundsation
- Mikrofon ENDORFY
- Mikrofon B-Band
- Mikrofon Perfect Choice
- Mikrofon TIE Audio
- Mikrofon Fluid
- Mikrofon AMT
- Mikrofon Xvive
- Mikrofon Lauten Audio
- Mikrofon White Shark
- Mikrofon Moza
- Mikrofon Nowsonic
- Mikrofon AEA
- Mikrofon Neat
- Mikrofon Antelope
- Mikrofon Prodipe
- Mikrofon Valcom
- Mikrofon IC Intracom
- Mikrofon Oktava
- Mikrofon Sontronics
- Mikrofon Anywhere Cart
- Mikrofon Owl Labs
- Mikrofon Klover
- Mikrofon Intricon
- Mikrofon Royer Labs
- Mikrofon Miktek
- Mikrofon Stageclix
- Mikrofon Townsend Labs
- Mikrofon Sabian
- Mikrofon SmallRig
- Mikrofon Lorgar
- Mikrofon Scope Labs
- Mikrofon Mirfak Audio
- Mikrofon CKMOVA
- Mikrofon DOCKIN
- Mikrofon Tonor
- Mikrofon MILAB
- Mikrofon Switchcraft
- Mikrofon Tonsil
- Mikrofon Sescom
- Mikrofon Sonic Presence
- Mikrofon Movo
- Mikrofon PureLink
- Mikrofon Isovox
- Mikrofon Glemm
- Mikrofon Røde
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
13 Oktober 2024
13 Oktober 2024
9 Oktober 2024
9 Oktober 2024
8 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024