Audio-Technica ATND971a Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica ATND971a (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ATND971
Cardioid Condenser Boundary Microphone with Dante™ Network Output
Features
Description
The ATND971 is a Dante-enabled, wide-range condenser microphone with a cardioid polar pattern. It is designed
for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other
demanding sound pickup applications.
The microphone features a touch-sensitive capacitive-type user switch with integral red/green LED status indicator.
In Local mode the user switch mutes and unmutes the microphone. It can be set to toggle between live and muted
audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio
while the switch is pressed (press to mute). In Remote mode the user switch can be used to trigger functions on
compatible Dante-enabled devices, such as a video camera’s pan/tilt or a rooms lighting preset. While in Remote
mode the microphones audio output is controlled remotely.
The audio output of the ATND971 can be routed using Audinates Dante Controller, which is available for download
at the Audinate website (www.audinate.com). The site also provides Dante routing and software instructions.
The microphone is equipped with UniGuard® RFI-shielding technology, which offers outstanding rejection of radio
frequency interference (RFI).
The microphone’s cardioid polar pattern provides a 120° angle of acceptance (cardioid in hemisphere above
mounting surface). Additional interchangeable elements with omnidirectional (36) and hypercardioid (100°) pickup
patterns are available.
Operation and Maintenance
The ATND971 is powered by network PoE. The electronics in the microphone take up
to 30 seconds to stabilize after power is applied.
The microphone should be placed on a at, unobstructed mounting surface, with the
front of the microphone facing the sound source. The sound source should not be
below, or higher than 60° above, the plane of the mounting surface.
The microphone features a touch-sensitive user switch with integral red/green LED status indicator. The user switch
has four Local settings that can be chosen by pressing the button beneath “SWITCH FUNCTION” and “DEFAULT
MODE.The default setting is TOGGLE ON/OFF. Press the button once to change setting to TOGGLE ON/OFF. In both
settings the user switch will toggle between mute and unmutethe only difference is the status of the audio when
the microphone is turned on. Press the button a second time to select MOM. ON (momentary on), wherein the audio
will be on only while the user switch is being pressed (press to talk). Press the button a third time to select MOM.
OFF (momentary off), wherein the audio will be muted while the user switch is being pressed. Press the button a
fourth time to cycle the setting back to the default. The “SWITCH FUNCTION” and “DEFAULT MODE” LEDs will
illuminate red or green to indicate the current setting.
Turn the low-cut UniSteep® lter on and off by pressing the button beneath “LOW CUT” on the bottom of the
microphone. The lter is off by default. The LED aboveLOW CUT illuminates red when the lter is off, green when
it is on.
There are three input gain levels that can be selected: +30 dB (for loudest voices), +40 dB and +50 dB (for softest
voices). To adjust the gain level, press the button beneath “GAIN” on the bottom of the microphone. Pressing the
button once changes the level from +30 dB to +40 dB, pressing it again changes the level to +50 dB and pressing a
third time returns the level to +30 dB. The LED above “GAIN” illuminates green for +30 dB, orange for +40 dB and
red for +50 dB.
To lock the Local settings, press and hold the button beneath “LOCK” on the bottom of the microphone. Press and
hold again to unlock settings. The LED above “LOCK” will illuminate red when locked and remain unlit when not
locked. If a setting button is pressed while the lock is on, the LOCK LED will blink.
All LEDs on the bottom of the microphone will turn off seven seconds after the last button is pressed. Pressing any
button will cause the LEDs to relight.
Specifications
Element Fixed-charge back plate,
permanently polarized condenser
Polar pattern Half-cardioid (cardioid in hemisphere
above mounting surface)
Frequency response 30-20,000 Hz
Low frequency roll-off 80 Hz, 18 dB/octave
Maximum input sound level 117 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise radio 68 dB, 1 kHz at 1 Pa
Power requirements PoE IEEE802.3af standard
Power consumption 1.5W
Switches Local Mode:
Touch-sensitive capacitive type user switch function:
toggle (mute on power up), toggle (talk on power up),
momentary on, momentary off;
Low-cut lter:at, roll-off; Gain: +30 dB, +40 dB, +50 dB
Remote Mode:
Low-cut and Gain via third-party software*
Weight 393 g
Dimensions 110.0 mm (L), 89.5 mm (W), 35.8 mm (H)
Output connector RJ45
Dante network Physical level: standard Ethernet
Connector: single RJ45
Cable quality: Shielded CAT5 or CAT6 recommended
Transmission speed: 100 Mbps
Optional interchangeable elements UE-O omnidirectional (360°)
UE-H hypercardioid (100°)
Accessory furnished Soft protective pouch
frequency response: 30–20,000 Hz polar pattern
Frequency in Hertz
LEGEND
Response in dB
12" or more on axis SCALE IS 5 DECIBELS PER DIVISION
FORM No. ATGC-L0326-15-E
Machida Tokyo Japan
To return the microphone to its default Local settings, press the GAIN and LOW CUT buttons simultaneously.
The microphone can also be controlled remotely via third-party software.* When this software is used it will
override local control, causing the audio to remain on and the red/green LED status indicator, low-cut lter and input
gain level to be controlled remotely. In Remote mode the microphones user switch can be programmed to trigger
functions on compatible Dante-enabled devices. When in remote mode the Remote LED is illuminated.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43° C for extended periods.
Extremely high humidity should also be avoided.
User Switch Settings and Functions in Local Mode
CONTROL
User Switch Mode SWITCH FUNCTION
LED Color
DEFAULT MODE
LED Color
Default Toggle
(mute on power up)
Green Red
1st Press Toggle
(talk on power up)
Green Green
2nd Press Press to Talk Red Red
3rd Press Press to Mute Red Green
Roll-off
110 mm
DANTE/PoE
89.5 mm
35.8 mm
network microphones
FORM No. ATGC-L0326-15-C
Machida Tokyo Japan
ATND971
心形指向性界面电容话筒带Dante™
使线 - 线
/
中操控 设备
LED/
绿显示
512
- 射(RFI)
- 高
100°
360°
ATND971是一枚具有Dante功能,宽阔频宽的电容式心形指向性界面话筒,设计于平面放
置应用,提供高质量收音、会议、远程教学等高要求的收音应用。
/绿L ED
开关话筒以静音或讲话操作,当中可以设置讲话和静音间的反覆切换 (锁存式开/关)之间的
( )
()Dante
摄像机的拍摄目标位置或房间的照明预置功能。同时话筒的音频输出亦可在远程模式中作
出远端控制。
ATND971 使AudinateDante 线 Audinate
(www.audinate.com)Dante
UniGuar ( RFI )
时受到如手提电话等的干扰。
话筒的心形指向性提供120°的收音角度(平面上的心形半圆),并可选配其他适合的收音头
360°100°
ATND971 PoE30
才达到稳定的状态。
话筒应放置在平面上,及没有阻碍物的环境使用。音源应在话筒的
60°
/绿LED
四组设置选择,可以通过按下底部的按钮选择“开关功能(SWITCH FUNCTION)”和“默认模
(DEFAULT MODE) (TOGGLE ON/OFF)
-
区别只是在话筒上电时的音频状态。再按下第二次,会设置为“点动开启模式(MOM.ON)”,
( )
(MOM.OFF)”,
(按下静音)。当再按下第四次时,会恢复到周期设置的预设状态。在“开关功能(SWITCH
FUNCTION)”(DEFAULT MODE)”绿
UniSteep® 的“LOW CUT”按
即“LOW CUT”的LEDLED
绿色显示。
+ 3 0 d B ( ) + 4 0 d B
+50dB (用于柔弱的音量)。要调整增益电平,可按下话筒底部的“GAIN按钮。按下一次
+30 dB +40dB +50dB
增 益 电平 返 回 + 3 0 d B 。 上述 “GAIN的 L E D 会分 别 以 绿 色( + 3 0 d B ) ,橙 色 ( + 4 0 d B )和 红 色
(+50dB)
如要锁定本地设置,可持续按下话筒底部的LOCK按钮,再次持续按下可解除锁定。当
,“LOCK”的 LED
按钮,LOCK指示灯会闪烁显示。
在最后一之按下按钮后,话筒底部的所有LED将会保持7秒后关闭,直至再按下任何按钮
后,LED指示灯才重新亮起。
收音头 ,
30-20,000 Hz
80 Hz, 18 dB/octave
117 dB
声压级
, 1 kHz
1% T.H.D.
讯噪比
68 dB, 1 kHz
1 Pa
PoE IEEE802.3af
耗电量
1.5
:
电容式轻触感应的开关方式:锁存(上电静音)
锁存(上电讲话)、点动开启、点动关闭;
滤波器:平直、高通滤波;
增益:
+30 dB, +40 dB, +50 dB
*
393
110.0 mm,
89.5 mm,
35.8 mm
RJ45
Dante
R
J45
线使
CAT5
CAT6
线
100 Mbps
UE-O
全方向性
(360°)
UE-H
超心形指向
(100°)
软质保护袋
频率响应
: 30–20,000 Hz
指向特性
频率 (赫兹)
电平
响应电平 (dB)
平直 声压曲线
1 刻度为 5dB
高通滤波
110 mm
DANTE/PoE
89.5 mm
35.8 mm
network microphones
“GAIN”LOW CUT”
话筒也可以通过第三方软件进行远程控制。*在使用这些软件时,软件将会无视本地控制的
使LED/绿
控制所取代。在远程模式时,话筒上的用户开关可以被编程为控制其他兼容Dante设备的
(Remote)LED
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱,应避免将话筒留在日晒的地方
43°C湿
本地模式时用户开关的设定与功能
用户开关模式 开关功能的LED颜色
(SWITCH FUNCTION)
默认模式的LED颜色
(DEFAULT MODE)
预设 锁存式
(上电静音)
绿色 红
第一次按下 锁存式
(上电讲话)
绿色 绿
第二次按下 点动开启 红色 红色
第三次按下 点动关闭 红色 绿色


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: ATND971a

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica ATND971a benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-