Audio-Technica ATM250 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica ATM250 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
HYPERCARDIOID DYNAMIC INSTRUMENT MICROPHONE
- Frequency response tailored for kick drum, percussion, brass , and
other highly dynamic instruments.
- Handles very high SPL at close range.
- Big, warm low-frequency response with excellent presence.
- Hypercardioid polar pattern reduces pickup of sounds from the
sides and rear, improving isolation of desired sound source.
- Durable performance for professional applications.
- Hi-ENERGY® neodymium magnet for improved output and transient
response.
- Superior off-axis rejection for maximum gain before feedback.
- Corrosion-resistant contacts from gold-plated XLRM-type connector.
- Rugged, all-metal design and construction for years of trouble-free
use.
- Includes isolation clamp and shock protection, secure mounting and
easy positioning.
Output from the microphones XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins 2 and
3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” - positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be
wired consistently: Pin 1-to-Pin 1, etc.
The ATM250 includes an AT8471 isolation clamp to provide secure
mounting, versatile positioning and effective dampening of unwanted
mechanical noise.
Take care to keep foreign particles from entering the windscreen.
An accumulation of iron or steel filings on the diaphragm, and/or
foreign material in the windscreen’s mesh surface, can degrade
performance.
FORM No. ATGC-L0033-06-E
Machida Tokyo Japa n
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Hypercardioid
FREQUENCY RESPONSE 40-15,000 Hz
OPEN CIRCUIT SENSITIVITY -54 dB (1.9 mV) re 1V at 1 Pa
IMPEDANCE 600 ohms
WEIGHT (less cable and accessories) 252 g
DIMENSIONS 127.5 mm - long,
55.0 mm - diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8471 isolation clamp for ⅝”-27
threaded stand;
⅝”-27 to ⅜”-16 threaded adapter;
Soft protective pouch
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向特性
频率特性
声压曲线 1刻度5 dB
频率
频率 ( )
电平 平直
响应电平 (dB)
FORM No. ATGC-L0033-06-C
Machida Tokyo Japan
超心形指向性动圈式乐器话筒
-
开发
- 能处常高
- 强大的低
-
的隔
- 应用
- Hi-ENERGY® 高能量钕硼磁铁,提供更大输出及音质透明
-
的情
- 蚀的XLRM头。
- 全金、耐使用。
- 防震,提稳固校夹
的 卡XLRM
终以卡农公头的23号针脚输出,而1号针脚则为地线(
)。输相位2脚上
为避免出现相位相互抵消而失真的情况,所有话筒连接时,
线1-12 -2 3-3
输入匹配器 。AT8201
ATM250 AT8471套有 防震话筒夹,提供稳固的安装,及
夹持机械声。
小心不要把金属碎或铁屑掉进防风罩内,铁屑会吸进收音头
中,内,低收
技术指标
收音头 动圈式
指向特性 超心形指向性
频率响应 40-15,000 Hz
开通灵敏度 -54 dB (1.7 mV) 1V 1 Pa
输出阻抗 600 欧姆
重量(不带连线与配件) 252
外形尺寸 127.5 mm - 长度,
55.0 mm - 直径
输出连接器 内置 XLRM-3针卡农公头
附属品 AT8470 Quiet-Flex™ - ⅝”-27接头
⅝”-27⅜”-16转接头,保護袋。


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: ATM250

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica ATM250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-