Audio-Technica AT808G Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AT808G (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
SUBCARDIOID DYNAMIC CONSOLE MICROPHONE
FORM No. ATGC-L0127-07-E
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Subcardioid
FREQUENCY RESPONSE 200-5,000 Hz
OPEN CIRCUIT SENSITIVITY -60 dB (1.0 mV) re 1V at 1 Pa
IMPEDANCE 800 ohms
WEIGHT 135 g
DIMENSIONS 412.7 mm long,
25.0 mm head diameter
19.0 mm base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across
Pins 2 and 3; Pin 1 is ground (shield). Output phase is
“Pin 2 hot positive acoustic pressure produces positive
voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables
must be wired consistently: Pin 1-to-Pin 1, etc. For a high-
impedance (Hi-Z) mic input, connect a Lo-Z balanced
cable to a Hi-Z matching transformer (A-T CP8201 or
equal) at the equipment input.
Plug Type Ground Audio “+” Audio “-”
XLR Pin 1 Pin 2 Pin 3
¼" TRS Sleeve Tip Ring
¼" Sleeve Tip Sleeve
The flexible gooseneck is easy to manipulate for proper
positioning. Heavily lubricated, it operates smoothly and
quietly. Should the unit become noisy with prolonged use,
apply a light machine oil directly on the gooseneck area
affected.
Take care to keep foreign particles from entering the
windscreen. An accumulation of iron or steel lings on the
diaphragm, and/or foreign material in the windscreen’s
mesh surface, can degrade performance.
- Designed for use as a quality talk-
back microphone in entertainment,
commercial and industrial
applications.
- Versatile gooseneck design and
dependable performance.
- Custom-tailored frequency
response ensures excellent
intelligibility in environments with
excessive ambient noise.
- Subcardioid polar pattern reduces
pickup of sounds from the sides
and rear, improving isolation of
desired sound source.
- Protective screen reduces wind
noise and “popping” when used
extremely close.
- Plugs directly into an XLRF-type
surface or cable connector.
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
指向特性
频率特性
声压曲线 1刻度5 dB
频率
频率 (赫兹)
电平 平直
响应电平 (dB)
FORM No. ATGC-L0127-07-C
准心形指向性调控台动圈话筒
Machida Tokyo Japan
技术指标
收音头 动圈式
指向特性 准心形指向性
频率响应 200-5,000 Hz
开通灵敏度 -60 dB (1.0 mV) 1V 1 Pa
输出阻抗 800 欧姆
重量 135 g
外形尺寸 412.7 mm 长,
25.0 mm 收音头外径,
19.0 mm 底座外径
输出连接器 内置 XLRM-3针卡农公头
话筒的 卡农输出端为低阻抗平衡输出,XLRM
话筒音频信号最终以卡农公头的23号针脚
1 线 ()
相位将以正相位电平设于2
为避免出现相位相互抵消而失真的情况,所有
线1-12-23-3
把针脚连接。如连接高阻抗的话筒输入,请配
器 。AT8201
插头类 地线 音频“+ 信号 音频“-”信号
XLR 卡农 1号针脚 2号针脚 3号针脚
¼"TRS 大三芯 Sleeve(套) Tip(尖) Ring(环)
¼"TR 大二芯 Sleeve(套) Tip(尖) Sleeve(套)
灵活的鹅颈式结构容易控制到适当位置。非常
润滑灵活,可顺利和安静地操作。如果在长时
间使用后发现话筒鹅颈位置出现噪音,请使用
润滑机油直接加进到鹅颈位置。
小心不要把金属碎或铁屑掉进防风罩内,铁屑
会吸进收音头磁铁中,或贴在防风罩内,将会
-
-
-
-
提高收音目标的隔离度。
-
- XLRF可直接插入连接到 卡
农母头的板面或连接线。


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: AT808G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica AT808G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-