Audio-Technica AT8024 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AT8024 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1 kHz
330°
300°
270
°
240°
210°
180°
150°
120°
90°
60°
30°
1 kHz 1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
AT8024
Stereo/Mono Camera-Mount Microphone
Features
Description
The AT8024 is a xed-charge condenser microphone designed for use with DSLR
and other video cameras. The microphone offers the exibility of mono and mid-
side stereo modes for high-resolution audio in any environment.
The microphone is powered by a included single 1.5V AA battery. The AA battery
provides optimal performance with high max SPL. A red/green LED power
indicator, located on the top of the unit, illuminates green when the microphone is
sufciently powered and red when battery power is low. The AT8024 is equipped
with a three-position input pad that allows for attenuation adjustment. The
microphone also features an 80 Hz high-pass lter switch that permits choice of
at response or low-frequency roll-off to reduce the pickup of undesired ambient
noise, room reverberation and mechanically coupled vibrations.
The microphone is enclosed in a rugged housing and includes an integral
shoe mount that fits most camera shoes. Two rubber shock mounts isolate
the microphone from vibration and mechanical camera noise. The microphone
includes a permanently attached cable with a 3.5 mm L-type stereo plug output. A
clip on the shoe mount holds the cable, relieving tension and preventing vibration
noise.
A windscreen and fuzzy windscreen are also included.
Installation and Operation
The mode switch located on the top of the unit allows user to select between
mono and internally matrixed mid-side stereo modes.
Mono Operation: In Mono mode, the microphone uses its line-cardioid element
exclusively to provide excellent off-axis rejection. This is ideal for recording
interviews, dialogues or sound sources that might otherwise be drowned out in
noisy environments.
Mid-Side Stereo Operation: In Stereo mode, the microphone provides internally
matrixed mid-side stereo, delivering wide, life-like stereo sound. Locating the
AT8024 nearer the sound source will enhance the apparent width of the stereo
image, while decreasing room ambience. Moving the microphone away from the
sound source will narrow the stereo image and provide more Mroom soundr The
Stereo mode is well-suited for sporting events and other active situations where
sonic realism is desired.
The integral shoe mount slides into the shoe of most cameras. Tighten the nut
on the shoe mount to hold the microphone securely in place. The shoe mount is
also equipped with a strain-relief clip for the cable. Insert the cable into the clip to
reduce wear on the cable and eliminate noise from cable vibration.
To install the battery, press the PUSH button located on the side of the unit. This
will eject the battery compartment. Insert a 1.5V AA battery according to the
polarity markings in the compartment, then press the compartment back into the
body of the unit so that it clicks closed. When the mode switch is moved from
the Off position to Mono or Stereo, the LED power indicator will illuminate green,
showing that the microphone has power. Replace or recharge the battery when
the LED illuminates red.
The attenuation can be adjusted by using the three-position input pad switch (-20
dB, -10 dB, 0 dB) located on the top of the unit. Adjust according to the volume of
the sound source: -20 dB for the loudest sounds, 0 dB for the softest. The 80Hz
high-pass lter switch is located along side the input pad switch. To engage the
high-pass lter, slide the switch toward the "bent" line.
Since even slight or unexpected winds can adversely affect audio recordings, it is
best to use the microphone with the supplied windscreen or, when recording in
especially windy environments, the supplied fuzzy windscreen.
Avoid leaving the microphone in the open sun or in areas where temperatures
exceed 43° C for extended periods. Extremely high humidity should also be
avoided.
Specifications
Element Fixed-charge back plate,
permanently polarized condenser
Polar pattern Line-cardioid, LR stereo
Frequency response 40 - 15,000 Hz
Low frequency roll-off 80 Hz, 12 dB/octave
Open circuit sensitivity
(Mono & LR Stereo)
37 dB (14.1 mV) re 1V at 1 Pa
Impedance 50 ohms
Maximum input sound level
(Mono & LR Stereo)
128 dB SPL, 1 kHz at 3% T.H.D.;
148 dB SPL, with 20 dB pad
Dynamic range (typical) Mono: 106 dB, 1 kHz at Max SPL;
Stereo: 104 dB, 1 kHz at Max SPL
Signal-to-noise radio Mono 72 dB, 1 kHz at 1 Pa;
Stereo 70 dB, 1 kHz at 1 Pa
Battery (included) Type: One 1.5V AA; Life: 100 hours typical
Switches Mono, M-S Stereo; Three-position input pad;
Flat, roll-off
Weight 114 g
Dimensions 172.5 mm long, 24.0 mm maximum body diameter
Output connector 3.5 mm stereo mini-plug on cable
Cable Permanently attached 0.2m -1m coiled cable
with right-angle molded 3.5 mm stereo mini-plug
at output end
Accessories furnished Windscreen; Fuzzy windscreen; AA battery
10 dB
20k10k5k2k1k50020010050
frequency response: 40~15,000 Hz
polar pattern
Frequency in Hertz
LEGEND
Response in dB
12" or more on axis
SCALE IS 5 DECIBELS PER DIVISION
Roll-off
SCALE IS 5 DECIBELS PER DIVISION
LEGEND LEGEND
LEFT RIGHT
LR stereo Mono
1 kHz
330°
300°
270
°
240°
210°
180°
150°
120°
90°
60°
30°
1 kHz 1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
AT8024
/
 为
好质量的话筒。
 可线
环境中提供高解析音频的收音。
三段可调的输入衰减和高通滤波设定。
整合式减振橡胶,能隔离相机的机械振动噪声。
小巧轻量的结构,配有整合式热靴接口。
AT8024
1.5VAA5AA5
/ 绿 L E D
绿
AT8024
80H z
相机的热靴座。话筒配有两个橡胶防震结构,可隔离摄像机的振动噪
音。另外,话筒以永久连接的导线配置于一个L型3.5mm立体声插头输
线线
安装与操作
AT8024M-S
线
访
中侧(M-S)立体声收音:在立体声模式下,话筒使用内部一个中侧立体
广 AT8024
线线
PUSH
1.5V AA 5
OFF
单声道或立体声模式位置时,LED电源指示灯将亮起绿色,表示明话筒
LED
3(-20dB, -10dB, OdB),
-20dBOdB
80 H z
中低频噪声(如外间汔车引擎声,空调系统的风声等),房间中的回声及
因为即使是轻微的或意外的风可以录音产生不利影响,这是最好用的
麦克风所提供的挡风玻璃,或者在特别是有风的环境下拍摄时,所提
配有防风棉,能简易地套在话筒的收音头部份,有效地降低轻微或意
外风声对录音产生的不利影响。而在特别大风的环境下拍摄时,亦提
使
把话筒暴露于高温中可能导致输出电平逐渐及永久减弱,应避免将话
筒 留 在 日 晒 或 长 时 间 置 于 温 度 超 过 4 3 ° C 的 地 方 , 而 极 高 湿 度 也 应 避
技术指标
收音头
线
40 - 15,000 Hz
80 Hz, 12 dB/octave
()
–37 dB (14.1 mV) 以 1V 1 Pa
50
()
128 dB 声压级, 1 kHz 于 3% T.H.D.;
148 dB 声压级, 带 20 dB 衰
() 声道: 106 dB, 1 kHz 于高声级;
体声: 104 dB, 1 kHz 于高声
信噪比 声道: 72 dB, 1 kHz 于 1 Pa;
体声: 70 dB, 1 kHz 于 1 Pa
() 11.5V AA 型 5; 寿: 100 小()
/M-S; 3;
/
114 克
172.5 mm, 机 24.0 mm
线 3.5 mm 迷你
连接线 0.2m -1m 线,
3.5 mm
; ; AA 5
10 dB
20k10k5k2k1k50020010050
: 30~20,000 Hz
频率 (赫兹)
电平
响应电平 (dB)
平直
高通滤波
声压曲线 1 刻度为 5dB 声压曲线 1 刻度为 5dB
左声道 右声道
声 单


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: AT8024

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica AT8024 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-