Audio-Technica AT2020 USB Bedienungsanleitung

Audio-Technica Mikrofon AT2020 USB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AT2020 USB (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
20 series studio microphones
AT2020
Cardioid Condenser Side-Address Microphone
Features
• Designed for project/home-studio applications
• High SPL handling and wide dynamic range provide unmatched
versatility
• Custom-engineered low-mass diaphragm provides extended
frequency response and superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
• Rugged design and construction for reliable performance
• Pivoting, threaded stand mount attaches securely for easy and
precise placement of the microphone
Description
The AT2020 is a side-address xed-charge condenser microphone with a
cardioid polar pattern. It is designed for project/home studio applications.
The microphone requires 48V phantom power for operation.
The cardioid polar pattern of the microphone is more sensitive to sound
originating directly in front of the element, making it useful in controlling
feedback, reducing pickup of unwanted sounds and providing isolation
between performers.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing. The included stand mount
permits mounting on any microphone stand with 5/8"-27 threads. A soft
protective pouch is also included.
Operation and Maintenance
The AT2020 requires 48V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
An Audio-Technica emblem is on the front of the microphone. Position
this side of the microphone toward the sound source.
In use, secure the cable to the mic stand or boom, leaving a slack loop
at the mic. This will ensure the most effective shock isolation and reduce
the possibility of accidentally pulling the microphone out of its mount.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Architect’s and Engineer’s Specications
The microphone shall be a side-address xed-charge condenser. It shall
have a cardioid polar pattern with a uniform 120° angle of acceptance
and a frequency response of 20 Hz to 20,000 Hz. The microphone shall
operate from an external 48V DC phantom power source. It shall be
capable of handling sound input levels up to 144 dB with a dynamic range
of 124 dB. Nominal open-circuit output voltage shall be 14.1 mV at 1V, 1
Pascal. Output shall be low impedance balanced (100 ohms).
The output of the microphone shall be a 3-pin XLRM-type connector.
The microphone shall be 162.0 mm (6.38") long and have a maximum body
diameter of 52.0 mm (2.05"). Weight shall be 345 grams (12.1 oz). The
microphone shall include a stand mount and a soft protective pouch.
The Audio-Technica AT2020 is specied.
AT2020
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0204-01
Specications
LEGEND
200 Hz
1 kHz
5 kHz
8 kHzSCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚ 0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axisLEGEND
Frequency in Hertz
Response in dB
10 dB
100
50 200 10k5k1k500 2k 20k
frequency response: 20 –20,000 Hz
polar pattern
Fixed-charge back plate, permanently
polarized condenser
Cardioid
20-20,000 Hz
–37 dB (14.1 mV) re 1V at 1 Pa
100 ohms
144 dB SPL, 1 kHz at 1% T.H.D.
20 dB SPL
124 dB, 1 kHz at Max SPL
74 dB, 1 kHz at 1 Pa
48V DC, 2 mA typical
345 g (12.1 oz)
162.0 mm (6.38") long,
52.0 mm (2.05") maximum body diameter
Integral 3-pin XLRM-type
R7
Stand mount for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter; soft
protective pouch
Element
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Noise1
Dynamic range (typical)
Signal-to-noise ratio1
Phantom power requirements
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specications are subject to change without notice.
465

Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: AT2020 USB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica AT2020 USB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon Audio-Technica

Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024
Audio-Technica

Audio-Technica XM1S Bedienungsanleitung

5 Oktober 2024
Audio-Technica

Audio-Technica AT831R Bedienungsanleitung

3 Oktober 2024
Audio-Technica

Audio-Technica ES925C/FM3 Bedienungsanleitung

14 September 2024
Audio-Technica

Audio-Technica AT4081 Bedienungsanleitung

12 September 2024
Audio-Technica

Audio-Technica ES945WO/TB3 Bedienungsanleitung

11 September 2024
Audio-Technica

Audio-Technica ES925C/DS3 Bedienungsanleitung

7 September 2024
Audio-Technica

Audio-Technica ES925ML/FM5 Bedienungsanleitung

4 September 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Azden

Azden SGM-250CX Bedienungsanleitung

6 Oktober 2024
Pyle

Pyle PDWM5900 Bedienungsanleitung

5 Oktober 2024
Auna

Auna VHF-4 Bedienungsanleitung

4 Oktober 2024