Audio-Technica AT-LP120XUSB Bedienungsanleitung

Audio-Technica Plattenspieler AT-LP120XUSB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AT-LP120XUSB (20 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

AT-LP120XBT-USB

User Manual

Wireless Direct-Drive Turntable

Introduction

Thank you for purchasing this Audio-Technica product.

Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future

reference.

This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the

product are correct for the country you live in.

Package contents

Make sure that you have all the included items listed below before using this product.

If some items are missing or damaged, contact your local Audio-Technica dealer.

• Turntable body Dust cover Felt mat• •

• Platter • Counterweight • Headshell (AT-HS6) with VM stereo

cartridge (AT-VM95E)

• • • 45 RPM adapter Stylus target light Dust cover hinges

• AC adapter (approx. 1.3 m (4.3'))

• Quick start guide

• Caution guide

• • USB cable (1.9 m (6.2')) RCA audio cable (approx. 1.4 m (4.6'))

After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.

Safety precautions

Although this product was designed to be used safely, failing to use

it correctly may result in an accident. To ensure safety, observe all

warnings and cautions while using the product.

Important information

Warning:

To prevent fire or shock hazard, do not expose this apparatus to rain or

moisture.

Caution:

• Do not expose this apparatus to drips or splashes.

• To avoid electric shock, do not open the cabinet.

• Refer servicing to qualified personnel only.

• Do not expose this apparatus to excessive heat such as sunshine, fire

or the like.

• Do not subject this apparatus to strong impact.

• This apparatus should be located close enough to the AC outlet so

that you can easily grasp the AC adapter at any time.

• In case of emergency, disconnect the AC adapter quickly.

• Do not place any objects filled with liquids, such as vases, on this

apparatus.

• To prevent fire, do not place any naked flame sources (such as

lighted candles) on this apparatus.

• Do not install this apparatus in a confined space such as a bookcase

or similar unit.

• Install this apparatus only in the place where ventilation is good.

For customers in the USA

FCC Notice

Warning:

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Caution:

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Contact:

Responsible Company: Audio-Technica U.S., Inc.

Address: 1221 Commerce Drive, Stow, Ohio 44224, USA

Tel: 330-686-2600

Safety precautions

RF Exposure Statement:

This transmitter must not be co-located or operated in conjunction

with any other antenna or transmitter used in other systems. This

device complies with FCC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF)

Exposure Guidelines. This equipment has very low levels of RF energy

that it deemed to comply without maximum permissive exposure

evaluation (MPE). But it is desirable that it should be installed and

operated keeping the radiator at least 20 cm or more away from

person’s body.

For customers in Canada

IC statement:

CAN ICES-3 (B)/NMB-3(B)

This device complies with INDUSTRY CANADA R.S.S. 247. Operation

is subject to the following conditions: (1) This device may not cause

harmful interference and (2) this device must accept any interference

received, including interference which may cause undesired operation.

Under Industry Canada regulations, this radio transmitter may only

operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should

be so chosen that the equivalent isotropically radiated power (e.i.r.p.)

is not more than that necessary for successful communication. This

equipment should be installed and operated with minimum distance 20

cm between the radiator & your body.

Notes on use

Turntable body

• Do not set and use the product in locations that are considerably hot

or humid, dirty, or subject to extreme vibrations.

• The product should be positioned on a flat, level surface.

• Read the user manual for the Bluetooth receiver device.

Cartridge

• Attach the protector to protect the stylus when the product is not in

use.

• Do not touch the stylus of the cartridge with your finger.

• Do not allow the cartridge's stylus to bump against the platter or the

edge of the record.

Produktspezifikationen

Marke:	Audio-Technica
Kategorie:	Plattenspieler
Modell:	AT-LP120XUSB
Form:	S-förmiger Tonarm
Breite:	452 mm
Tiefe:	352 mm
Gewicht:	8000 g
Mitgelieferte Kabel:	RCA, USB
Produktfarbe:	Silber
Höhe:	141.6 mm
Lautstärkeregler:	Drehregler
Netzteil Ausgangsspannung:	12 V
AC-Adapter Ausgangssstrom:	3 A
Stromverbrauch (Standardbetrieb):	2.75 W
Netzteil Eingansgsspannung:	100 - 240 V
Typ:	Audio-Plattenspieler mit Riemenantrieb
Betriebsanleitung:	Ja
Anzahl:	1
Rauschverhältnis (SNR):	50 dB
Netzteilfrequenz:	50/60 Hz
Nominale Geschwindigkeit:	33 1/3, 45, 78 RPM
Plattenteller Schnelligkeit:	33 1/3, 45, 78 RPM
Betrieb:	Manuell
Netzteiltyp:	AC
Anzahl der USB-Anschlüsse:	1
Motortyp:	DC-Servomotor
Plattenmaterial:	Aluminium
Gleichlaufschwankung:	0.2 %
Ausgabeebene:	240 mV
Adapter für 45 U/min:	Ja
Anfangsdrehmoment:	1 kg/cm
Ton-Regler:	Ja
Integrierter Phono-Vorverstärker:	Ja