Audio-Technica AE2300 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audio-Technica AE2300 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
User Manual
Cardioid Dynamic Instrument Microphone AE2300
Features
Notes on use
Connection procedure
Outp n sut termi al
PIN1 (ground)
PIN3
(cold)
PIN2 (hot)
Specifications
Dynamic
Cardioid
60 - 20,000 Hz
6,000 Hz, 6 dB/octave
-57 dB (1.4 mV) re 1V at 1 Pa
250 ohms
Flat, roll-off
138 g
95.6 mm long, 28.0 mm maximun diameter
Integral 3-pin XLRM-type
AT8471 isolation clamp for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter;
soft protective pouch
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
* Typical, A-weighted, using Audio Precision System One.
P r atternola p
Fr r o eequency esp ns
180°
150°
120°
30°
330°
300°
270°
240°
210°
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
07-DEC--2020 Form No.ATGC-L0385-20
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
Thank you for purchasing this product. Before using the product, read through the user manual to
ensure that you will use the product correctly.
Please keep this manual for future reference.
The AE2300 is a dynamic microphone with a cardioid polar pattern. It is designed specifically for
musical instrument pickup in the studio and on stage.
The cardioid polar pattern of the microphone is more sensitive to sound originating directly in
front of the element, making it useful for controlling feedback and reducing pickup of unwanted
sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is equipped with a switch that permits choice of flat response or high-frequency
roll-off (via integral 6 kHz low-pass filter).
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
Connect e as a microphone input the output terminals of the microphone to a d vice that h
(balanced input). The output connector is an XLRM-type with polarity as shown in the figure
below.
For product improvement, the product is sublect to modification without notice.
• Tailored to capture sound from guitar amps, brass and woodwinds, drums and percussion
instruments with equal clarity and precision
• Proprietary double-dome diaphragm construction improves highfrequency and transient
response
• Excels in high-SPL applications and maintains directionality across the entire frequency range
• Minimal off-axis coloration (frequency response is nearly identical at 0°, 90°, and 18) helps to
maintain phase coherence in multiple microphone setups
• Switchable low-pass filter removes harsh, high-frequency content without negatively affecting
the overall tone of an instrument
• Low-profile design allows microphone to be placed easily and unobtrusively in a wide variety of
setups
• Rugged, brass metal construction ensures dependable performance in live music applications
• Isolation stand clamp provides secure mounting, versatile positioning, and effective dampening
of unwanted mechanical noise
Safety precaution
Cautions for the product
Although this product was designed to be used safely, failing to use it correctly may result in an
accident. To ensure safety, observe all warnings and cautions while using the product.
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty
place.
Element
Polar pattern
Frequency response
High Frequency roll-off
Open circuit sensitivity
Impedance
Switches
Weight
Dimensions
Output connector
Accessories furnished
Roll-off
60°
90°
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
50010050 200 10k5k1k 2k 20k
10 dB
心形指向动圈式乐器话筒 AE2300
输出端子
针脚1(接地
针脚3
针脚2
■ 规格
动圈式
心形指向性
20 - 20,000 Hz
6,000 Hz,6 dB/octave
-57 dB(1.4mV) 以 1V 于 1Pa
250 欧姆
AT8471 防震式 5/ -27 接头话筒夹;8
5/ -27 至 3/ -16 转接头、8 8
保護袋
元件
指向性
频率响应
高截滤波
开路灵敏度
输出阻抗
平直,高截滤波
138 克
噪声
重量
附带配件
1 帕= 10 达 平方厘米 10 微巴= 94 dB SPL /
* 典型A 计权,使用 Audio Precision System One
因产品改进本产品会随时改装恕不另行通知。
指向性
频率响应
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
全球支持联系:www.at-globalsupport.com
响应单位是 dB
频率单位是赫兹
图例
, 厘米50
比例是每分隔线 5 分贝
图例
200 赫兹
1 千赫兹
5 千赫兹
8 千赫兹
感谢您购买本产品。在使用产品之前请全文浏览本用户手册以确保您将正确
使用本产品。请妥善保存本手以供将来参考
产品特点
特别为收录来自吉他扩音器、铜管和木管乐器、鼓及打击乐器的声音而定制,以获
得同样的清晰度和准确度
专利的双球顶振膜结构,可改善高频音域的瞬间响应
良好的耐高声压级的应用,并能在整个频率范围内保持着一致的收音方向性
更小的离轴声染色效应(频率响应在0°、90°及180°0的位置中几乎相同),这有助
于在多个话筒设置时,维持话筒间的相位相干性
设有高截滤波开关,能消除在高频内容中的刺耳声,使乐器的整体基调不会造成负
面影响
低调的设计可让话筒更方便而不显眼地作各种设
坚固的黄铜金属结构,可确保在现场演出使用时的可靠性能
隔离话筒夹能提供安全的安装,并可作多种定位功能,而且更能有效阻隔不必要的
机械噪声
使用注意事项
AE2300是一枚心形指向性动圈话筒,专为录音棚和舞台上的乐器收音而设计
话筒的心形指向性设计,能为前端的声音作更敏感收音,是直接和音源引起感应的
重要元素,有利于控制反馈和减少不必要的声音干扰。
话筒的XLRM卡农输出端为平衡输出。
话筒上设有一个开关,可选择以平直的频率响应收音或作高频响应衰减 (通过内
的6kHz低截滤波器)。
把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱,应避免将话筒留在日晒
的地方或长时间置于温度超过43°C的地方,而极高湿度也应避免。
连接步骤
将话筒的输出端子连接到具有话筒输入(平衡输入)的设备。输出接口是XLRM型
接口,其极性如下图所示。
07-DEC-2020 Form No.ATGC-L0385-20
安全预防措施
本产品注意事项
虽然本产品采用安全设计,但使用不当仍可能发生事故。为了确保安全,使用
产品时请注意全部警告和提醒
切勿让本产品遭受强烈冲击以避免发生故障。
切勿拆开、改装或尝试维修本产品。
切勿用湿手握持本产以免触电或受伤。
切勿将本产品存放在阳光直射的地方、加热装置附近或者炎热、潮湿或多尘的
地方。
高通滤波
长度 95.6 mm, 最大直径 28.0 mm
内置式 3 针卡农公头
尺寸
输出端子
10 dB
10
0
-10
-20
-30
20
50010050 200 10k5k1k 2k 20k
180°
150°
120°
30°
330°
300°
270°
240°
210°
60°
90°


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: AE2300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica AE2300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Audio-Technica

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-