Atlona AT-HDR-EX-70 Bedienungsanleitung

Atlona Audio-/Video-Extender AT-HDR-EX-70

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlona AT-HDR-EX-70 (12 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
1
Installation Guide
AT-HDR-EX-70-2PS
4K HDR HDMI Over HDBaseT TX/RX Kit
AT-HDR-EX-70-2PS
The Atlona AT-HDR-EX-70-2PS is an HDBaseT transmitter/receiver kit for high dynamic range
(HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4
chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-70-2PS provides
HDMI transmission up to 230 feet (70 meters) for 1080p video, and up to 130 feet (40 meters)
for 4K HDR over CAT6a/7 cable. This extender kit features visually lossless compression with no
latency to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. The HDR-EX-70-
2PS delivers a cost-eective solution for HDMI extension, with locally powered transmitter and
receiver endpoints as well as surface mounting hardware for discreet installation.
The HDR-EX-70-2PS is ideal for residential applications with the latest as well as emerging 4K/
UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats,
and color space formats supported in the HDMI 2.0a specication, plus the ability to pass
metadata for HDR content. The HDR-EX-70-2PS includes Atlona’s award-winning 10 year limited
product warranty and customer support services, so that integrators can specify, purchase, and
install with condence.
IMPORTANT: Visit http://www.atlona.com/product/AT-HDR-EX-70-2PS for the latest
rmware updates and Installation Guide.
1 x AT-HDR-EX-70-2PS-TX
1 x AT-HDR-EX-70-2PS-RX
4 x Mounting brackets
8 x Mounting screws
2 x 5 V DC power supplies
1 x Installation Guide
Package Contents
2
Installation Guide
AT-HDR-EX-70-2PS
FW
AT-HDR-EX-70-2PS-TX
POWER
LINK
DC 5V HDBaseT OUT HDMI IN
ON
1
FW
UNIT HDBaseT
FW
AT-HDR-EX-70-2PS-RX
POWER
LINK
DC 5V HDBaseT IN HDMI OUT
ON
1
FW
UNIT HDBaseT
Panel Descriptions
1 FW
Connect a mini-USB to USB-A type
cable from this port to a computer, to
update the rmware. Refer to Updating
the Firmware, on page 5, for more
information.
2 POWER
This LED indicator glows solid green
when the unit is powered. Refer to
LED Indicators, on page 4, for more
information.
3 LINK
This LED indicator indicates the link status
between the transmitter and the receiver.
Refer to , on page 4, for LED Indicators
more information.
4 DC 5V
Connect the included power supply to this
power receptacle.
5 HDBaseT OUT
Connect an Ethernet cable from this port
to the port on the receiver.HDBaseT IN
6 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
7 HDBaseT IN
Connect an Ethernet cable from this
port to the port on the HDBaseT OUT
transmitter.
8 HDMI OUT
Connect an HDMI cable from this port to
an UHD/HD display.
9 FW (UNIT / HDBaseT)
Set this switch to the position to UNIT
update the rmware. Refer to Updating
the Firmware, on page 7, for more
information. For normal operation or
for HDBaseT cable testing, set to the
HDBaseT position. Refer to Testing
HDBaseT Signal Integrity, on page 5, for
more information.
Transmitter
Front Front
Rear Rear
Bottom Bottom
Receiver
4 45 76 8
2
9 9
21 13 3
3
Installation Guide
AT-HDR-EX-70-2PS
1. Connect a UHD/HD source to the port on the AT-HDR-EX-70-2PS-TX.HDMI IN
2. Connect a UHD/HD display to the port on the AT-HDR-EX-70-2PS-RX.HDMI OUT
3. Connect an Ethernet cable, from the port on the AT-HDR-EX-70-2PS-TX, HDBaseT OUT
to the port on the AT-HDR-EX-70-2PS-RX.HDBaseT IN
4. Connect each of the included 5 V DC power supplies to the locking power DC 5V
receptacles on both the AT-HDR-EX-70-2PS-TX and AT-HDR-EX-70-2PS-RX.
5. Connect each of the power supplies to an available AC outlet.
Installation
IMPORTANT: The DIP switch, on the bottom of both the transmitter and receiver,
must be set to mode for normal operation. If this is not the case, then HDBaseT
disconnect power from the unit, set the DIP switch to mode, and then HDBaseT
reconnect the power.
LED Indicators
The and LED indicator on the transmitter and receiver unit provides basic POWER LINK
information on the current status of the AT-HDR-EX-70-2PS. The information in the table below
applies to both the transmitter and receiver unit.
POWER Description
Solid green Unit is powered.
O Unit is not powered.
• Verify that the locking connector is securely fastened to the
power receptacle.
• Make sure that the power supply is connected to an active
AC outlet.
IMPORTANT: Do not over-tighten or apply high-torque devices to the locking
connector. Doing so may damage the power receptacle and/or locking connector.
LINK Description
Solid yellow The link integrity between the transmitter and the receiver is
good.
Blinking yellow Poor signal integrity between the transmitter and the receiver.
• Make sure that the Ethernet connection between the HD-
BaseT IN port on the transmitter and the HDBaseT OUT
port on the receiver is secure.
• The Ethernet cable may be compromised. Try using a
dierent Ethernet cable. Make sure that the cable is solid
core. Stranded or patch cables are not recommended.
O The link integrity between the transmitter and the receiver is
compromised.
• Check the Ethernet cable between the HDBaseT IN port on
the transmitter and the HDBaseT OUT port on the receiver.

Produktspezifikationen

Marke: Atlona
Kategorie: Audio-/Video-Extender
Modell: AT-HDR-EX-70

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlona AT-HDR-EX-70 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Audio-/Video-Extender Atlona

Atlona

Atlona AT-VGA180ASR Bedienungsanleitung

18 Mai 2024
Atlona

Atlona AT-UHD-EX-70C-RX Bedienungsanleitung

26 April 2024
Atlona

Atlona AT-HDR-EX-70 Bedienungsanleitung

16 April 2024
Atlona

Atlona AT-HD50SS Bedienungsanleitung

25 März 2024
Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

7 Februar 2024
Atlona

Atlona AT-HDRX-RSNET Bedienungsanleitung

24 Januar 2024
Atlona

Atlona UHD-EX-70-2PS Bedienungsanleitung

6 Januar 2024
Atlona

Atlona AT-OME-SW21-TX-WPC Bedienungsanleitung

15 September 2023
Atlona

Atlona AT-UHD-PRO3-88M Bedienungsanleitung

11 September 2023
Atlona

Atlona AT-UHD-EX-100CEA-KIT Bedienungsanleitung

31 August 2023

Bedienungsanleitung Audio-/Video-Extender

Neueste Bedienungsanleitung für -Kategorien-

Kramer

Kramer PT-571 Bedienungsanleitung

19 August 2024
Vivolink

Vivolink VLHDMIEXTFIB Bedienungsanleitung

27 Juni 2024
Vivolink

Vivolink VLEXTA170 Bedienungsanleitung

27 Juni 2024
SEADA

SEADA SD-WP31V Bedienungsanleitung

18 Juni 2024
SEADA

SEADA HBT70B-KIT Bedienungsanleitung

18 Juni 2024
SEADA

SEADA HBT70S-KIT Bedienungsanleitung

18 Juni 2024
Adder

Adder ALIF2020R Bedienungsanleitung

9 Juni 2024
Adder

Adder ALIF2020P Bedienungsanleitung

9 Juni 2024
Adder

Adder Link X-USBPRO Bedienungsanleitung

9 Juni 2024
Adder

Adder XD150 Bedienungsanleitung

9 Juni 2024