Atlantic LCR3 Bedienungsanleitung

Atlantic Lautsprecher LCR3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlantic LCR3 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
LCR3
Compact High Performance Loudspeaker
Specications for the L
Specications for the L
Specications for the L
Specications for the LSpecications for the LC
C
C
CCR3
R3
R3
R3R3
Type Sealed-box, 2-way
Drivers: Woofers (2) 31/2˝ CPP
Tweeter (1) 3/4˝ silk dome tweeters
Frequency Response 100Hz - 20kHz (± 3dB)
Nominal Impedance 6 Ohms
Crossover Frequency 3.5kHz
Sensitivity 88dB
Recommended Amplier Power 10-125 Watts
Dimensions 43/4˝ x 111/4˝ x 5˝ (120mm x 284mm x 127mm) w/grille
Weight (each, unpacked) 4.78 lbs; 10.5kg
Specications are those in effect at the time of printing. Atlantic Technology reserves the right to change specications or
appearance at any time without notice.
Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of DTS Inc.
343 Vanderbilt Avenue Norwood, MA 02062
(781) 762-6300
www.atlantictechnology.com
LCR3
Compact High Performance
Loudspeaker
Thank you for choosing Atlantic Technology home
theater products. Your new speaker system is precision
craed to give you years of enjoyable, trouble free serv-
ice. is manual covers the Atlantic Technology LCR3.
e LCR3 is a versatile loudspeaker that can be used in
any position in a home theater such as a leor right
channel or a center channel or even a surround channel.
Each LCR3 consists of a low resonance MDF cabinet,
dual 3.5˝ CPP drivers, 3/4˝ silk dome tweeter and high
quality crossover components. e LCR3 is designed for
use with all surround formats such as Dolby Digital,
DTS or Dolby Atmos.
Us
Us
Us
UsUsi
i
i
iing the L
ng the L
ng the L
ng the Lng the LCR
CR
CR
CRCR3 as a F
3 as a F
3 as a F
3 as a F3 as a Front Ch
ront Ch
ront Ch
ront Chront Channel
annel
annel
annelannel
Speaker or Surr
Speaker or Surr
Speaker or Surr
Speaker or SurrSpeaker or Surround Channel Speaker
ound Channel Speaker
ound Channel Speaker
ound Channel Speakeround Channel Speaker
We recommend placing the LCR3 with the tweeters
facing inward. Set the receiver bass management or
speaker size to “small” and the crossover to 100Hz.
Alternatively, if you have limited room you can use the
LCR3 horizontal positioned just like a center channel.
We have included four 4mm rubber feet in each accessory
bag to mount to the bottom of the cabinet depending on
how you choose to place the speaker.
Aer you have determined the best way to mount the
speaker, peel and stick the Atlantic Wave logo to the grill.
Us
Us
Us
UsUsi
i
i
iing the L
ng the L
ng the L
ng the Lng the LCR
CR
CR
CRCR3 as a
3 as a
3 as a
3 as a3 as a
Ce
Ce
Ce
CeCenter Channel Speake
nter Channel Speake
nter Channel Speake
nter Channel Speakenter Channel Speaker
r
r
rr
We recommend placing the LCR3 with the tweeters
positioned away from any table or shelf as shown in the
picture. Set the receiver bass management or speaker
size to “small” and the crossover to 100Hz.
We have included four 4mm rubber feet in each accessory
bag to mount to the bottom of the cabinet depending on
how you choose to place the speaker.
Aer you have determined the best way to mount the
speaker, peel and stick the Atlantic Wave logo to the grill.
e Atlantic Technology LCR3 may also be used with a
wide variety of speakers from other manufacturers with
satisfying results.
Con
Con
Con
ConConnec
nec
nec
necnecting
ting
ting
ting ting Y
Y
Y
YYour Sy
our Sy
our Sy
our Syour System
stem
stem
stemstem
We recommend that you connect your LCR3 speaker
systems with high quality dual conductor stranded wire
of 18 gauge or larger, for lengths up to 25 feet. Use 16
gauge dual conductor or larger for longer runs of wire.
Contact your local audio/video specialist for specic
cable recommendations and further information for
special circumstances.
Warning: To prevent risk of electrical shock or damage
to your equipment, always switch off the amplier or
receiver when making connections to the speaker.
You can connect your LCR3 speakers by using a variety of audio connectors,
or you can:
Strip about 1/2˝ (13mm) of
insulation from the con-
necting wires. Connect
them to the appropriate
push terminal, being
careful to observe po-
larity (positive to the
red terminal, nega-
tive to the black
terminal).
Whether you are
connecting a
complete LCR3
system, or adding
a single speaker
component to your present system, the wiring should look like the diagram
in Figure 2.
Figure 2: Typical wiring diagram for speakers in a home theater.
Figure 1: Gold plated 5-way binding posts.
Accepts up to 14 gauge bare wire.
Warning: Before turning on the amplier, be certain that no
stray wire strands are touching across the two terminals as this
might damage your amplier.
Finally, check the polarity of your front speakers by listening to some music.
If the sound seems hollow, unusually spread out, or has weak bass, recheck
your connections for proper polarity. If necessary, reverse any out of phase
connections. Only one speaker wired out of phase is usually the culprit.
Pla
Pla
Pla
PlaPlace
ce
ce
cecemen
men
men
menment a
t a
t a
t at and
nd
nd
ndnd
Op
Op
Op
OpOpe
e
e
eeratio
ratio
ratio
ratioration
n
n
nn
Speaker/room interactions have a huge impact on the sound of the system.
Moving the speakers just a little bit can make a dramatic difference in what you
hear. e ultra-compact design of LCR3 provides you with maximum placement
exibility while creating a large, seamless, acoustically accurate soundeld for your
home theater or music system. e best placement of the speakers will vary from
room to room. Use the following placement guidelines and Figure 3 as a starting
point. But also feel free to experiment. In fact, it may be benecial to hook up the
speakers with some extra wire and to simply drape the wire across the oor before
installing the speakers permanently. is will allow you the opportunity to move
the speakers around easily so you can nd the best sonic and visual locations.
Typical arrangement for speakers in a home theater. For best results, place the sur-
round speakers within the shaded area. Note that the surround speakers are marked
Le and Right. It is important that the speakers be placed correctly for proper imaging.
M
M
M
MMoun
oun
oun
ounountin
tin
tin
tinting
g
g
gg
e LCR3 speakers can be mounted in a
variety of ways:
On speaker stands:
On speaker stands:
On speaker stands:
On speaker stands:On speaker stands:
We recommend speaker stands with an
approximate height of 29˝ above the oor.
Ideally the tweeter of the speaker should
be at ear level when seated. e LCR3 has
a
1/4-20 threaded insert in the back so you
can anchor the speaker to the stand.
On the wall:
On the wall:
On the wall:
On the wall:On the wall:
To mount your speakers on a wall, we have
installed metal key-hole brackets on the
back of the LCR3 speakers. Be sure to use
a strong screw whose head and sha will
t within the keyhole opening and slot.
Also be sure to drive the screw well into a
stud or use a mounting device (such as a
molly-bolt) that is capable of holding the weight of the speaker. Never simply drive
a nail or screw into a sheet rock or other wall materials. Always follow the above
guidelines for safe speaker mounting.
On a bookshelf
On a bookshelf
On a bookshelf
On a bookshelfOn a bookshelf:
:
:
::
Adhesive rubber feet are included.
Liste
Liste
Liste
ListeListening Levels
ning Levels
ning Levels
ning Levelsning Levels and
and
and
and and P
P
P
PPower
ower
ower
ower ower
Handli
Handli
Handli
HandliHandling
ng
ng
ng ng – IMP
– IMP
– IMP
– IMP– IMPORT
ORT
ORT
ORTORTA
A
A
AANT!
NT!
NT!
NT!NT!
e power recommendation for these speaker
components assumes that you will not operate
your amplier/receiver in a way that produces
distortion. Even rugged speakers like LCR3 can
be damaged by a moderately powered system
driven beyond its intended capacity. e harsh
amplier clipping that occurs in this situation will
cause damage to the speaker system. is type of
damage is easily identiable through examination
of the damaged speaker’s voice coil and is not cov-
ered by the warranty. e LCR3 will play very
loudly when provided with enough clean power
to do so. Again, consult your dealer or Atlantic
Technology for additional information.
Car
Car
Car
CarCare and F
e and F
e and F
e and Fe and Fe
e
e
eeeding
eding
eding
eding eding of
of
of
of of Y
Y
Y
YYour S
our S
our S
our Sour Speakers
peakers
peakers
peakerspeakers
Clean your speaker cabinets using a so cloth
moistened with a mild, non-abrasive glass cleaner
being careful not to wet the edges of the cabinet.
Also, be careful not to get any cleaning uids on
the driver cones or domes. It may be best to
dampen the cloth with the cleaner and then wipe
the speakers. Use a so cloth, but do not use any
paper products, because no matter how so they
may feel, they will scratch the nish. Aer care-
fully removing the grilles from the speakers, clean
them with a quick pass from a vacuum cleaner
with a brush attachment. is should remove any
dust accumulation. Avoid placing your speakers
in direct sunlight or near a source of heat that
may, over time, damage the nish.
Impor
Impor
Impor
ImporImportant:
tant:
tant:
tant: tant: Sav
Sav
Sav
SavSave
e
e
ee
Y
Y
Y
YYour Box
our Box
our Box
our Boxour Boxes!
es!
es!
es!es!
If possible, save the cartons, packing pieces,
and plastic bags that came with your speak-
ers. ey will be useful in case you move or
have to ship your loudspeakers for any rea-
son. In any case, save all packing materials
until you are certain that the systems have
suffered no damage in shipment. If you nd
such damage, either visible or internal, con-
tact your dealer immediately for the proper
return procedure.
Figure 3

Produktspezifikationen

Marke: Atlantic
Kategorie: Lautsprecher
Modell: LCR3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlantic LCR3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Atlantic

Atlantic

Atlantic LCR2 Bedienungsanleitung

23 September 2024
Atlantic

Atlantic 4400 THX Select Bedienungsanleitung

6 September 2024
Atlantic

Atlantic TLC-8.3 Bedienungsanleitung

5 August 2024
Atlantic

Atlantic LCR3 Bedienungsanleitung

4 August 2024
Atlantic

Atlantic TLC-8.2 Bedienungsanleitung

28 Juli 2024
Atlantic

Atlantic FS-7.1 Bedienungsanleitung

26 Juli 2024
Atlantic

Atlantic FS3 Bedienungsanleitung

25 Juli 2024
Atlantic

Atlantic H-PAS PowerBar 235 Bedienungsanleitung

19 Juli 2024
Atlantic

Atlantic IW-105LCR Bedienungsanleitung

14 Juli 2024
Atlantic

Atlantic ICTS-6 HT Bedienungsanleitung

14 Juli 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024