ATen VE819 Bedienungsanleitung

ATen Audio-/Video-Extender VE819

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen VE819 (35 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/35

HDMI Dongle Wireless Extender

VE819

User Manual

www.aten.com

VE819 User Manual

FCC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. Any changes or modifications made to

this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy. If not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: This device complies with the essential requirements of the

R&TTE Directive 1999/5/EC. The following test methods have been applied

in order to prove presumption of conformity with the essential requirements of

the R&TTE Directive 1999/5/EC:

 EN 60065

Safety of Information Technology Equipment

 EN 50371

Generic standard to demonstrate the compliance of low power electronic and

electrical apparatus with the basic restrictions related to human exposure to

electromagnetic fields (10 MHz - 300 GHz) -- General public

 EN 301 893

VE819 User Manual

iii

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;

Harmonized EN covering essential requirements of article 3.2 of the R&TTE

Directive

 EN 301 489-1

Electromagnetic compatibility and Radio Spectrum Matters (ERM);

ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services; Part 1: Common technical requirements

 EN 301 489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM);

ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services; Part 17: Specific conditions for 2,4 GHz wideband transmission

systems and 5 GHz high performance RLAN equipment

RoHS

This product is RoHS compliant.

Produktspezifikationen

Marke:	ATen
Kategorie:	Audio-/Video-Extender
Modell:	VE819
AC-Netzadapter:	Ja
Mitgelieferte Kabel:	HDMI, IR, USB
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabellos
Impedanz:	100 Ohm
Garantiekarte:	Ja
Material:	Kunststoff
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Fernbedienung enthalten:	Ja
Zertifizierung:	FCC
Typ:	AV-Sender & -Empfänger
Betriebsanleitung:	Ja
Plug & Play:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
HDCP:	Ja
Unterstützte Video-Modi:	480p, 576p, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
3D:	Ja
Anzahl der USB-Anschlüsse:	2
USB-Version:	2.0
Externes Netzteil:	Ja
Maximale Auflösung:	1920 x 1080 Pixel
Nachhaltigkeitszertifikate:	RoHS
Anzahl der HDMI-Ausgänge:	1
Fernbedienungstyp:	IR
Maximal mögliche Übertragungsstrecke:	10 m
Bandbreite:	6.75 Gbit/s
Fernbedienung (IR) output:	1
Empfängerdimensionen (B x T x H):	95 x 95 x 33.3 mm
Empfängergewicht:	130 g
HDMI-In:	1
Teilnehmerausgang:	1
Eingang:	1
Transmitter-Abmessungen (BxTxH):	30 x 70.3 x 17.5 mm
Gewicht Transmitter:	30 g
Betriebsspannung (Sender):	5 V
Stromverbrauch (Sender) (max.):	7.5 W
Betriebsspannung (Empfänger):	5 V
Stromverbrauch (Empfänger) (max.):	7.5 W