ATen UE250 Bedienungsanleitung

ATen Kabel für Computer und Peripheriegeräte UE250

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen UE250 (2 Seiten) in der Kategorie Kabel für Computer und Peripheriegeräte. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Installation

Installation is simply a matter of plugging in the cables:

1. Plug the UE-250 USB cable into the computer’s USB

port or a USB hub.

2. Plug the USB peripheral into the UE-250 socket.

That’s all there is to it.

Troubleshooting

Problem Cause Solution

Device

operates

erratically

Static electricity or

insufficient power

may cause the

device to operate

erratically.

Reset the device by

unplugging the cable and

then plugging it back in or

use external power to your

linked devices.

specifications

Function Specification

Power Supply Bus Powered

Cable length (output) 5 m (16ft.)

Connectors 1 Type A Male

1 Type A Female

USB Specification 2.0 spec. for high, full and low

Driver Support Native Driver Support

Operating Temperature 5° - 40° C

Storage Temperature -20° - 60° C

Humidity 0% - 80% RH, NC

Weight 255g

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED

THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed,

implied, or statutory with respect to the contents or use of this

documentation, and especially disclaims its quality, performance,

merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to revise or update the device or

documentation without obligation to notify any individual or entity of such

revisions, or update. For further inquiries, please contact your direct

vendor.

- 5 -- 4 -

User Manual

UE-250

Read this manual thoroughly and follow the installation and

operation procedures carefully to prevent any damage to the

unit, and/or any of the devices connected to it.

This package contains:

M1 UE-250 USB 2.0 Repeater Cable

M1 User Manual

If anything is damaged or missing, contact your dealer.

Manual Part No. PAPE-1240-100

Printed in Taiwan 10/2003

All brand names and trademarks are the registered property of their respective owners

Overview

The UE-250 USB Repeater Cable allows you to extend

the distance between your computer and your USB

peripherals by 5 meters (16’). Unlike typical cables, the

UE-250 is an active extension cable. All USB signals

transmitted through it are regenerated to maintain optimal

signal integrity to meet the USB 2.0 specification.

Features

MExtends the distance to USB devices by 5 m (16’)

MEmbedded custom ASIC regenerates transmitted USB

signals to maintain optimal signal integrity

System Requirements

MWhistler; Windows: XP, 2000, Me, 98 SE; Mac OS 8.6

or higher

Note: Only systems with a USB 2.0 driver installed

can support data transfer speeds of up to 480

Mbps; all others only support speeds of up to

12 Mbps.

MUSB 2.0 Host Controller installed on the system.

Note: The UE-250 can be connected to a USB 1.1

Host Controller, but in that case, it only

supports USB 1.1 speeds (1.5 - 12 Mbps).

Components

1. Built in cable with USB connection to USB port on PC

or hub

2. LED (green) indicates USB link

3. Type female USB port for connection from peripheralA

4. LED (red) indicates overcurrent

- 2 -- 1 - - 3 -

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device

pursuant to Subpart J of Part 15 of FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

MReorient or relocate the receiving antenna.

MIncrease the separation between the equipment

and receiver.

MConnect the equipment into an outlet on a circuit

different from that which the receiver is connected.

MConsult the dealer or an experienced

radio/television technician for help.

Produktspezifikationen

Marke:	ATen
Kategorie:	Kabel für Computer und Peripheriegeräte
Modell:	UE250
Gewicht:	255 g
Produktfarbe:	Schwarz
Betriebstemperatur:	5 - 40 °C
Menge pro Packung:	1 Stück(e)
Kabellänge:	5 m
Plug & Play:	Ja
Maximale Datenübertragungsrate:	480 Mbit/s
Temperaturbereich bei Lagerung:	-20 - 60 °C
USB-Version:	USB 2.0
Anschluss 1:	USB A
Anschluss 2:	USB A
Anschluss1 Formfaktor:	Gerade
Steckverbinder 1 Geschlecht:	Männlich
Anschluss2 Formfaktor:	Gerade
Steckverbinder 2 Geschlecht:	Weiblich
Kabeltyp:	Rundkabel