Aspes ATE080 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aspes ATE080 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
EN ELECTRIC WATER HEATER 03-07
Instructions for use and maintenance
ES
TERMO DE AGUA ELÉCTRICO
08-12
Instrucciones de uso y mantenimiento
Read this manual carefully and keep it for future reference.
Lea atentamente este manual y guárdelo para futuras consultas.
ATE30S
ATE50S
ATE80S
ATE 500
ATE080
Instructions for use and maintenancе 3
EN
English
I. IMPORTANT RULES
1. This appliance is intended for domestic use only.
2. This technical description and instructions manual was prepared in order to acquaint you
with the product and the conditions of proper installation and use. These instructions were also
intended for use by qualied technicians, who shall perform the initial installation, or disassembly
and repairs in the event of a breakdown.
3. Following the current instructions will primarily be of interest to the consumer, but along
with this, it is also one of the warranty conditions, pointed out in the warranty card, so that the
consumer can benet from the free warranty services. The producer is not responsible for damages
in the appliance that have appeared as a result of operation and/or installation not corresponding
to the instructions here.
4. The electric water heater complies with the requirements of
EN 60335-1, EN 60335-2-21.
5. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
6. Children shall not play with the appliance.
7. Cleaning and user maintenance shall not be made by children without supervision.
Attention! Improper installation and connection of the appliance may make it
hazardous for the health and life of consumers. It may cause grievous and
permanent consequences, including but not limited to physical injuries and/or death.
Improper installation and connection of the appliance may also lead to damage to the
consumers’ property /damage and/ or destruction/, or to that of third persons, as a
result of, but not limited to ooding, explosion and/or re. Installation, connection to the
main water and power supply, and putting into operation must be carried out by certiîš¿ed
electricians and technical personnel certiîš¿ed in installation of this category of appliances, who
have obtained their license in the state where the installation and commissioning of the
appliance are carried out, and in compliance with its local legislation.
All alterations and modications to the water heater’s construction and electrical circuitry are forbidden. If
such alterations or modications are established during inspection, the appliance’s warranty shall be null and
void. Alterations and modications shall mean each instances of removal of elements incorporated by the
manufacturer, building in of additional components into the water heater, replacement of elements by similar
elements unapproved by the manufacturer.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Mounting
---------------------------------------------------------------------------------------------------------------------------------------
1. The water heater must only be mounted in premises with normal re resistance.
2. In the event the device is mounted in a bathroom, the selected location must exclude the
possibility of water spray contact from the showerhead or portable showerhead attachment.
3. The water heater is designed to operate only in closed and heated premises where the temperature
is not lower than 4°C and it is not designed to operate in a continuous protracted regime.
4. The appliance is axed to a wall via the mounting brackets attached to the unit’s body (if the
brackets are not attached to the unit’s body, they must be axed in place via the provided bolts).
---------------------------------------------------------------------------------------------------------------------------------------
Water heater connection
---------------------------------------------------------------------------------------------------------------------------------------
1. The appliance is intended to supply hot water to household sites equipped with a piping system
working at pressure below 6 bar (0,6 Mpa).
2. The safety return-valve must be mounted on the cold water supply pipe, in observance of the direction
arrow stamped on its body, indicating the incoming water’s direction. Additional stopcocks must not be
mounted between the safety return-valve and the water heater.
Exception: If the local regulations (norms) require the usage of another protection valve or mechanism (in
accordance with EN 1487 or EN 1489), then it must be bought additionally. For mechanisms operating in
accordance with EN 1487 the announced operational pressure must be no more than 0.7 MPa. For other


Produktspezifikationen

Marke: Aspes
Kategorie: Nicht kategorisiert
Modell: ATE080

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aspes ATE080 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Aspes

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-