Ashdown Engineering ABM-410H-EVO IV Bedienungsanleitung
Ashdown Engineering
Gitarrenverstärker
ABM-410H-EVO IV
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ashdown Engineering ABM-410H-EVO IV (7 Seiten) in der Kategorie Gitarrenverstärker. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
Park Farm • Inworth • Colchester • Essex • CO5 9SH
http://www.ashdownmusic.com
Operating
Instructions
ABM/RPM-1 Amplifier Heads and ABM Combos
MAG 300 Amplifier Head and Combos
Electric Blue 180 Amplifier Head and Combos
Important Safety Instructions
BASIC PRECAUTIONS
WARNING - When using electrical products, basic precautions should be followed, including the following:
1. Read all the instructions before using the product.
2. Do not use this product near water – for example, near a bathtub, washbowl, kitchen sink, in a wet
basement or near a swimming pool.
3. This product may cause permanent hearing loss. Do not operate for long periods of time at a high
volume level or at any level that is uncomfortable. If you experience any hearing loss or ringing in the
ears, you should consult an audiologist.
4. Make sure nothing interferes with the ventilation of the product when in use.
5. The product should be located away from heat sources such as radiators, heat registers, or other
products that produce heat.
6. The product should be connected to a power supply of the type described in the operating
instructions or as marked on the product.
7. The power supply cord of the product should be unplugged from the outlet when left unused for a
long period of time.
8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings.
9. The product should be serviced by qualified personnel when:
a. The power supply cord or the plug has been damaged; or
b. Objects have fallen, or liquid has been spilled into the product: or
c. The product has been exposed to rain or moisture: or
d. The product does not appear to operate normally or exhibits a marked change in performance: or
e. The product has been dropped, or the enclosure damaged.
10. Do not attempt to service the product. All servicing should be referred to qualified service personnel.
11. For continued protection against the risk of fire, replace fuses only with those of the same type and
rating as indicated on the back of the product.
WARNINGS USED ON THE EQUIPMENT
Thank you for purchasing your Ashdown Engineering Amplifier. If you live in the UK, please register
your purchase by completing this form and return it to the following address:
Ashdown Engineering Ltd., Park Farm, Inworth, Colchester, Essex CO5 9SH
(Alternatively you can register online at http://www.ashdownmusic.com)
If you live outside the UK, the local Ashdown distributor may have included a specific registration
form for your country.
Your Ashdown Engineering product details:
Model . . . . . . . . . . . . . . . . . . . . . . . . . Colour . . . . . . . . . . . . . . . . . . . . . . . .
Voltage . . . . . . . . . . . . . . . . . . . . . . . . Tested by . . . . . . . . . . . . . . . . . . . . . .
Serial number . . . . . . . . . . . . . . . . . . . . Date . . . . . . . . . . . . . . . . . . . . . . . . .
2 Year Limited Lifetime Warranty
Your Ashdown Engineering amplifier has been manufactured to the highest standards, using the best-
selected materials.To ensure its optimum performance, please ensure your amplifier is regularly serviced.
This product carries a LIMITED LIFETIME WARRANTY, against defects in materials and workmanship, for
the original purchaser.Ashdown Engineering will, at their discretion, replace or repair any product or part
thereof, which is found by Ashdown Engineering to be defective.This warranty shall not apply to the
damage of covering, fittings or finishes when affected by carelessness, accident or extreme climate changes.
Nor does it apply to normal wear and tear of parts such as valves, fuses, light bulbs, speakers, controls etc.
Please complete the lower section of this warranty and return it within 10 days of purchase to Ashdown
Engineering Ltd. at the above address. In the unlikely event of any defect, please contact an authorised
Ashdown Engineering dealer. All transport charges are to be pre-paid by the Owner. Unless the
registration card is returned normal country warranty laws apply.
Important - Registration Card
Please complete and return this warranty within 10 days of purchase. Include any comments if possible.
Name . . . . . . . . . . . . . . . . . . . . . . . . . Purchased from . . . . . . . . . . . . . . . . . .
Address . . . . . . . . . . . . . . . . . . . . . . . . Date . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Number . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Age . . . . . . . . . . . . . . . . . . . . . . . . . . .
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The ABM Design Philosophy
This is a NO COMPROMISE design using the best parts available wherever possible.
Some examples of this are as follows:
• Gold plated jack sockets for reliability and long life.
• Full metal XLR sockets for strength and their positive latching facility.
• Powerful output stages for extra headroom (rated in English RMS real power and not MUSIC or
PEAK power as these can claim to be 2 or 3 times the actual real power of the amplifier).
• Doubling up of the cooling fans for reliability and reduced fan noise (2 fans can run at half the speed
to provide the same cooling capacity and as a consequence generate only half the noise of one fan
running at twice the speed).
• Speed controlled fan drive circuit. Again this reduces the amount of fan noise as the fans run slow
when the unit is cool and increase in speed with output power demands.
• Powerful TOROIDAL mains transformer. This is more expensive than a laminated stack transformer
but has better regulation, i.e., provides more power on demand without sagging out and also has a
minimal external magnetic field which means that single coil pick up basses are less likely to pick up
mains hum from the amplifier.
• FET input circuit to the preamp for ‘Warmth’ even when using the CLEAN input mix setting.
• D.C. heaters for the TUBE section for low noise operation.
• Switch on delay for silent power up.
• Thermal trip for output protection.
• Relay switched speaker output lines for silent power down.
• Sub Bass output and Sub Harmonics facility for really serious bottom end.
Everything possible has been done to make this a reliable, top of the range, minimum service, high quality,
long lasting powerful bass amplifier.
We know you will appreciate the effort that has been put into the design and manufacture of this unit
and you will be rewarded in your choice of bass amplifier by long life and reliability.
The lightning flash with the arrow head symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated ‘dangerous voltage’ within this product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying this product.
GROUNDING INSTRUCTIONS
This product must be grounded (earthed). If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric shock. This
product is equipped with a supply cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with the local codes and ordinances.
DANGER - Improper connection of the equipment grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product
– if it will not fit the outlet, have a proper outlet fitted.
The wires in this mains cord are coloured in accordance with the following code:
Green & Yellow - Earth Blue - Neutral Brown - Live
CE MARK FOR EUROPEAN HARMONISED STANDARDS
The CE mark which is attached to these products means it conforms to EMC Directive
(89/69/EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (72/23/EEC).
Produktspezifikationen
| Marke: | Ashdown Engineering |
| Kategorie: | Gitarrenverstärker |
| Modell: | ABM-410H-EVO IV |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ashdown Engineering ABM-410H-EVO IV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker Ashdown Engineering
16 August 2024
14 August 2024
10 August 2024
31 März 2024
3 Dezember 2023
9 November 2023
Bedienungsanleitung Gitarrenverstärker
- Gitarrenverstärker Valeton
- Gitarrenverstärker Roland
- Gitarrenverstärker Vox
- Gitarrenverstärker Yamaha
- Gitarrenverstärker Marshall
- Gitarrenverstärker Peavey
- Gitarrenverstärker Fender
- Gitarrenverstärker Behringer
- Gitarrenverstärker Boss
- Gitarrenverstärker Line 6
- Gitarrenverstärker Radial Engineering
- Gitarrenverstärker Hartke
- Gitarrenverstärker ART
- Gitarrenverstärker Orange
- Gitarrenverstärker Harley Benton
- Gitarrenverstärker Electro Harmonix
- Gitarrenverstärker Blackstar
- Gitarrenverstärker Bugera
- Gitarrenverstärker TC Electronic
- Gitarrenverstärker Palmer
- Gitarrenverstärker Ampeg
- Gitarrenverstärker Laney
- Gitarrenverstärker SPL
- Gitarrenverstärker Suhr
- Gitarrenverstärker AER
- Gitarrenverstärker Markbass
- Gitarrenverstärker EBS
- Gitarrenverstärker Fishman
- Gitarrenverstärker Voodoo Lab
- Gitarrenverstärker GR Bass
- Gitarrenverstärker Two Notes
- Gitarrenverstärker Hughes & Kettner
- Gitarrenverstärker Dimavery
- Gitarrenverstärker AMT
- Gitarrenverstärker Budda
- Gitarrenverstärker Empress Effects
- Gitarrenverstärker DACS Audio
- Gitarrenverstärker Rivera
- Gitarrenverstärker DV Mark
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
23 September 2024
19 September 2024
16 September 2024
6 September 2024
5 September 2024