Aruba AP-503H Bedienungsanleitung

Aruba Zugangspunkt AP-503H

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aruba AP-503H (12 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Aruba 503H Hospitality Access Points

Installation Guide

Installation Guide | July 2020 1

The Aruba AP-503H Access Points are high-performance, multi-radio wireless devices that can be deployed in

either controller-based (AOS) or controller-less (Instant) modes in hospitality and branch or teleworker

deployments. The Aruba AP-503H Hospitality Access Points support the full 802.11ax (Wi-Fi 6) featureset with

dual 2x2 MIMO radios, deliver locationing functions, and can serve as a flexible IOT gateway, delivered through

the built-in BLE and 802.15.4 radio.

A variety of mounting scenarios are supported by a range of mount kits (sold separately). Make sure to purchase

the correct mount kit for the intended deployment of the AP.

Hardware Overview

The following sections outline the hardware components of the Aruba AP-503H Access Points.

Figure 1 AP-503H (front view)

2Aruba 503H Hospitality Access Points | Installation Guide

Figure 2 AP-503H (side and rear view)

Figure 3 AP-503H (bottom view)

Security

Screw

Reset

Adapter

12V

Console

E1 E2

Aruba 503H Hospitality Access Points | Installation Guide 3

LEDs

The hidden LED displays located on the front panel of the access point indicate the following functions:

System Status

The System Status LED indicates the operating condition of the access point, See Table 1.

Table 1 System Status LEDs

1 Blinking: one second on/one second off, 2 second cycle.

2 Flashing Pattern 1: mostly on, briefly off, 2 second cycle.

3 Flashing Pattern 2: mostly off, briefly on, 2 second cycle.

Radio Status

The Radio Status LED indicates the operating mode of the access point’s radios. See Table 2.

Table 2 Radio Status LEDs

1 Alternating: one second each color, 2 second cycle.

LED Display Settings

The LEDs have three operating modes that can be selected in the system management software:

Default mode: Refer to Table 1 and Table 2

Off mode: LEDs are off

Blink mode: LEDs blink green

Force the LEDs into off mode and back to software defined mode by pressing the reset button for a short

duration. Warning: pressing the reset button for longer than 10 seconds may cause the AP to reset and return to

factory default state.

Color/State Meaning

Off Device powered off

Green- blinking 1Device booting, not ready

Green- solid Device ready, fully functional, no network restrictions

Green- flashing pattern 12Device ready, fully functional, uplink negotiated in sub-optimal speed (<1Gbps)

Green- flashing pattern 23Deep sleep mode

Red System error condition - Immediate attention required

Color/State Meaning

Off AP powered off, or both radios disabled

Green- solid Both radios enabled in access mode

Green- blinking One radio enabled in access mode, other disabled

Amber- solid Both radios enabled in monitor mode

Amber- blinking One radio enabled in monitor mode, other disabled

Green/Amber-

alternating1Green: one radio in access mode

Amber: one radio in monitor mode

Produktspezifikationen

Marke:	Aruba
Kategorie:	Zugangspunkt
Modell:	AP-503H
Bluetooth:	Ja
Bluetooth-Version:	5.0
Breite:	86 mm
Tiefe:	40 mm
Gewicht:	290 g
Produktfarbe:	Weiß
Höhe:	150 mm
Platzierung:	Table, Wall
Antennentyp:	Intern
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 93 %
Netzstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3az
Unterstützte Sicherheitsalgorithmen:	WPA2, WPA3
Stromverbrauch (Standardbetrieb):	10 W
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Maximale Datenübertragungsrate:	1487 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
2,4 GHz:	Ja
Antenne Zunahmeniveau (max):	5.6 dBi
Anzahl der Antennen:	2
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 93 %
Auto MDI/MDI-X:	Ja
USB-Stecker:	Micro-USB B
5 GHz:	Ja
Antennenfunktionen:	Integrierte Antenne
Modulation:	16-QAM, 64-QAM, 256-QAM, 1024-QAM, BPSK, CCK, QPSK
Antennenrichtungsart:	Halbdirektional
Maximale Datenübertragungsrate (5 GHz):	1200 Mbit/s
MIMO:	Ja
MIMO-Typ:	Multi User MIMO
Maximale Datenübertragungsrate (2,4 GHz):	287 Mbit/s
Spread-Spectrum Methode:	DSSS, OFDM, OFDMA