Aruba AP-303 Bedienungsanleitung

Aruba Zugangspunkt AP-303

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aruba AP-303 (13 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/13

Aruba 303 Series Campus Access Points

Installation Guide

Rev05 | March 2019 1

The Aruba 303 Series campus access points support IEEE802.11ac Wave 2, delivering high performance with the

MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /n wireless

services. The 303 Series access points can be deployed in either a controller-based (ArubaOS) or controller-less

(InstantOS) deployment mode.

The 303 Series access points provide the following capabilities:

IEEE 802.11a/b/g/n/ac operation as a wireless access point

IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

Compatibility with IEEE 802.3af PoE

Integrated Bluetooth Low Energy (BLE) radio

Package Contents

303 Series Access Point

Ceiling mount bracket (Spare: AP-220-MNT-C1 mount kit)

Hardware Overview

The following sections outline the hardware components of the 303 Series access points.

Figure 1 303 Series (front view)

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

System Status

Radio Status

2Aruba 303 Series Campus Access Points | Installation Guide

LED

The 303 Series access points have two LEDs that indicate the system and radio status of the device. These two

LEDs can be configured via ArubaOS or Aruba Instant software into three separate modes:

Normal mode (by default): See Table 1

Both LEDs off

Blink mode: Both LEDs blink green (synchronized)

1 blinking: one second on, one second off, 2 seconds cycle

2 flashing: mostly on, fraction of a second off, 2 second cycle

3 alternating: one second each color, 2 second cycle

Table 1 303 Series Access Point LEDs Status in Normal Mode

LED Color/State Meaning

System Status Off Device powered off

Green- Blinking1Device booting, not ready for use

Green- Solid Device ready for use, no restrictions

Green- Flashing2Device ready for use, uplink negotiated in sub optimal speed

(<1Gbps)

Red- Solid System error condition - immediate action required

Radio Status Off Device powered off, or both radios disabled

Green- Solid Both radios enabled in access mode

Green- Blinking One radio enabled in access mode, other disabled

Amber- Solid Both radios enabled in monitor mode

Amber- Blinking One radio enabled in monitor mode, other disabled

Alternating3Green: one radio in access mode

Amber: one radio in monitor mode

Aruba 303 Series Campus Access Points | Installation Guide 3

Figure 2 303 Series (rear view)

E0/POE Port

The 303 Series access point is equipped with one 10/100/1000Base-T auto-sensing, MDI/MDX Ethernet port (E0)

for wired network connectivity. This port supports IEEE 802.3af Power over Ethernet (PoE), accepting 48Vdc

(nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE

midspan injector, or network infrastructure that supports PoE.

Console Port

The console port is a Micro-B connector located on the back of this device. A proprietary serial adapter cable (AP-

CBL-SERU) is needed to use this interface. It is sold separately to connect the AP to a serial terminal or a laptop

for direct local management.

DC Power Socket

If PoE is not available, a proprietary Aruba AP-AC-12V30B power adapter kit (sold separately) can be used to

power the 303 Series access points.

DC Power Socket E0/POE Reset Console

Kensington Lock

Slot

Produktspezifikationen

Marke:	Aruba
Kategorie:	Zugangspunkt
Modell:	AP-303
Breite:	150 mm
Tiefe:	150 mm
Gewicht:	260 g
Produktfarbe:	Weiß
Höhe:	35 mm
Platzierung:	Ceiling, Wall
Anzahl USB 2.0 Anschlüsse:	1
Antennentyp:	Intern
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 93 %
Verpackungsbreite:	190 mm
Verpackungstiefe:	180 mm
Verpackungshöhe:	60 mm
Paketgewicht:	410 g
Netzstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Unterstützte Sicherheitsalgorithmen:	Nicht unterstützt
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Stromverbrauch (max.):	11.5 W
Maximale Datenübertragungsrate:	1167 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
2,4 GHz:	Ja
Antenne Zunahmeniveau (max):	5.9 dBi
Anzahl der Antennen:	2
Temperaturbereich bei Lagerung:	-40 - 70 °C
USB-Stecker:	Mikro-USB
Kabelsperre-Slot:	Ja
Slot-Typ Kabelsperre:	Kensington
5 GHz:	Ja
Modulation:	16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Antennenrichtungsart:	Mit kugelförmiger Richtcharakteristik
Maximale Datenübertragungsrate (5 GHz):	867 Mbit/s
MIMO:	Ja
MIMO-Typ:	Multi User MIMO
Maximale Datenübertragungsrate (2,4 GHz):	300 Mbit/s
Spread-Spectrum Methode:	DSSS, OFDM