Artusi CACC32KX Bedienungsanleitung

Artusi Ofen CACC32KX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Artusi CACC32KX (2 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Model Power Supply Power(W) Size (mm)
Buit-in Hole Size
(mm)
AC 220-240V
50-60Hz 1800W
(180mm)
1200W
(145mm)
Good Bad
(recessed base) (convex base) (undersize) (oversize)
Bad Bad Bad Bad Bad
(moisture on hotplate) (no pan)
Technical Data
CACC32K
CACC32K
Please read the instruction manual carefully before operating your new hob.
Dear Owner: Thank you for purchasing our cooktop designed to give you many years of cooking
pleasure. Before using your new appliance please read the user manual carefully and keep it in a safe
place for future reference.
THIS APPLIANCE MUST ONLY BE INSTALLED BY A QUALIFIED PERSON USING THE
INSTRUCTIONS PROVIDED. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
IMPROPER INSTALLATION THAT MAY HARM PERSONS AND ANIMALS OR CAUSE DAMAGE
TO PROPERTY. THE APPLIANCE MUST ONLY BE USED FOR THE PURPOSE FOR WHICH IT
WAS DESIGNED. ANY OTHER USE (e.g. HEATING ROOMS) IS CONSIDERED TO BE IMPROPER
AND MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE RESULTING FROM
IMPROPER AND/ OR IRRESPONSIBLE USE.
Utensils
Use pans with flat bottoms. Uneven or thin bottoms will waste energy and cooking times will be slow.
Use pans slightly larger than the cooking zones. Smaller pans will waste energy.
Do not use oversized pans. More than 50mm oversize can overheat cooktop components and can cause
fine cracks in the enamel hob that will trap dirt.
Use only dry utensils. Do not place wet or steamy parts (eg. lids) on the hotplates.
Do not use pots and pans that are unsteady and likely to rock or overbalance.
Do not operate the cooktop without pots or pans on the cooking zones.
Do not use enamel pots .
IMPORTANT NOTICE
Please register your warranty card. Return the enclosed warranty card dated and signed. The Manufacturer
shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the images and figures are purely indicative. The Manufacturer reserves the right to make any
modifications to the products as may be considered necessary or useful or in the interests of the user, without
jeopardizing the main functional and safety features of the product.
WARNING: Unattended cooking using fat or oil can be dangerous
and may result in a fire. In the event of a fire: Switch off the appliance
and then cover the flame with a lid or a fire blanket. NEVER try to
extinguish a fire with water.
CAUTION: Never leave any cooking food unattended. Spills,
overflows, burnt food and/or fire may result.
Danger of fire: Do not store items on the cooking surfaces.
SAFETY WARNING
1.Inspect the built-in ceramic hob carefully after opening the package. When there are any problems
please refer to the supplier.
2.Dispose of packaging materials (plastic bag, foam, nails, carton) carefully. Avoid a place where
children can easily access. Please dispose of packaging in an environmentally friendly manner.
3.Never attempt to change the wiring under any circumstances.
4.Dispose of the appliance in an environmentally friendly manner.
5.Replace damaged power cords by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
6.The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or a lack of experience and knowledge. All such users must be given instruction
and kept under supervision. Always supervise children and never allow them to play with the appliance.
7.Never stare at the hob elements when the appliance is working. It may damage your eyes.
8.Avoid burns: young children should be kept away as accessible parts become hot during use
9.WARNING: If the hob surface is cracked, switch off the appliance to avoid the possibility of electric
shock as hob glass-ceramic protect users from live electric parts.
10.Never use a steam cleaner on the hob.
11.Do not place metallic objects such as knives, forks, spoons and lids on the hob surface since they
can get hot.
12.CAUTION: The surface temperature exceeds 95°C. To avoid a hazard under bench access must be
restricted. Refer to the installation instructions.
13.WARNING: The appliance and its accessible parts become hot during use. Care should be taken to
avoid touching heating elements.
14.Do not operate the appliance with an external timer or separate remote-control system.
15.WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or
indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards can cause accidents.
16.Do not touch the built-in ceramic hob with wet hands or while standing in water with bare feet.
17.Do not operate the built-in electric hob when you are bare footed.
18.Always disconnect the power supply before you do any maintenance and cleaning.
When the built-in ceramic hob is working, the temperature of the electric hob and the ambient tempera-
tures become higher, so do not touch it and keep children away.
19.The built-in ceramic hob must be built into a heat resistant cabinet.
20.NOTE: Some smoke may occur when the hob is first used. Leave the hob on for a short period to
burn off excess sealants etc. used in the manufacturing process.
304X524X90 280(L)X496(W)
Operation of the top with the heating area
An appropriately selected pan saves energy. A pan should have a thick, flat base with a diameter equal
to the plate diameter as in that case heat is transferred most efficiently.
Advice on the use of cooking tops. To save energy and to have a longer life of the ceramic tops, we
advise using pans with flat bottom and with a diameter not less than the diameter of the tops. Care must
be taken that fluids do not spill on the ceramic plates. Never leave the tops on without pans on them or
with empty pans, and never use the tops to heat the plates. Switch on the plates after having set the
pans on them. Once switched off, the plates remain warm for a while, do not touch. Switch off the
heating element before removing the pans.
Use
Directions and suggestions for using
1.Do not touch the built-in ceramic hob with wet hands or feet.
2.Do not operate the built-in ceramic hob when you are bare footed.
3.Do not let young children operate the built-in ceramic hob.
4.Please disconnect the power supply before you do any maintenance and cleaning.
5.When the built-in ceramic hob is working, the temperature of the electric hob and the ambience become
higher, so please do not touch it and keep the children away from it.
6.A steam cleaner must not be used for cleaning the appliance.
7.The appliance is not intended to be operated by means of an external timer or separate remote-control
system.
8.The built-in ceramic hob must be built into a heat resistant cabinet. Some smoking may occur when first
used. Leave on for a short period to burn off excess sealant.
according to your needs, the tops can be adjusted by turning the knobs either clockwise or
anti-clockwise on 9 position besides the 0 position (off). The positions marked by the higher numerical
index match the maximum output of heat (see table).
0
1-2
3-4
5-6
7-8
9
Switch off
MIN.Warming up
Stewing vegetables,slow cooking
Slow frying
Grilling meat,fish
MAX.Fast heating up ,fast cooking,frying
Switch Knob
Power indicator
1
2
3
4
5
Cooking zone 1800W
Cooking zone 1200W
Glass panel high temperature indicator
1
2
353 4
Cod:0070304812-CV20231216
Scraper for cleaning the hob
Symbol
Product Information Value Unit
Model Identification
Type of
Number of cooking zones
Heating Technology (cooking
areas, radiant cooking zones,
solid plates)
Diameter of useful surface area
per electric heated cooking zone
(rounded to the nearest 5mm)
Energy consumption cooking
zone area calculated per kg
Energy consumption calculated
per kg
Hob
Ø
--
--
--
--
EC
EC
Built-in ceramic hob
2
MM
Wh/kg
Wh/kg
Radiant cooking zones
189
Big ring: 182
Small ring: 195
Big ring: 180mm
Small ring: 145mm
CACC32K
WARNING
Close the cable clamp after making the electrical connection.
Close the terminal board cover by twisting it down.
Cleaning
Turn off the main power to the hob before carrying out any maintenance and wait for it to cool down.
Use lukewarm water and detergents to clean enameled elements. Never use abrasive products. Clean
tough stains using non-abrasive detergents or warm vinegar.
Use sponges or a damp cloth to clean the hob. Remove cleaning liquid from the glass worktop with a damp
cloth and dry using a soft cloth. Note: excess water can damage the electric elements.
Clean the electric tops using a damp cloth, then lightly oil the top when it is still warm.
Only licensed repairers should service and repair the appliance
Installation
Electrical connection
Appliances with three-pole cable are set up for operation with alternating current at the voltage and
frequency indicated on the rating plate. Look at the connection wiring diagram. The earth conductor is
yellow/green.
The connection to the electricity supply must be made by a qualified person and following the regulations.
When the appliance is to be installed above a built-in oven, the two appliances must be connected separate-
ly to make it easier to take the appliances out and for electrical safety.
The supply cable must be so positioned that no point can reach a temperature 50° C higher than ambient
temperature. Check that the supply system has an effective earth connection and meets the standards and
that the breaker can be reached easily when the appliance is installed.
When a cable is damaged or must be replaced, the operation must be carried out the by a service agent or
a suitably qualified professional.
When the appliance is being connected directly to the mains, an omnipolar circuit breaker must be installed
with a minimum opening of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and that it is compliant with
all applicable standards and safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised technicians only.
TERMINAL BOARD
TECHNICAL INFORMATION FOR INSTALLATION PERSONNEL
This appliance must be installed only by authorised personnel and in accordance with the regulations of
electricity authorities. The wall and bench surfaces must be capable of sustaining temperatures of 95
degrees Celsius. All laminates, fixing adhesive and surfacing materials should be certified suitable for this
temperature. Do not install it in areas with combustible materials.
According to the pictures, cut the hole in bench and place the built-in electric hob in it.
Your hob can be fitted to any worktop with a thickness of 40 to 50 mm.
Unit:mm
Inserting and fixing the hob
Before inserting the hob into the work surface, place the adhesive seal “s” around the underside edge of the
hob. It is important to fix this gasket evenly without gaps or overlap to prevent liquids from seeping underneath
the hob.
1.Place the gasket around the bottom edge of the hobs as shown in the illustration overleaf.
2.Place the hob in the installation opening and push it down so that the hob is resting frimly on the cabinet.
3.Secure the hob in position using the fixing brackets supplied.
Fitting guidelines
Secure the hob to the underside of the worktop using the fixings provided.
Screw one end of the bracket into the pre-drilled holes in the underside of the hob. The other end of the bracket should be located
underneath the worktop to secure the hob in position
Note 1:
Fire resistant material (e.g. ceramic tiles) are required to 450mm above burner top if wall or vertical structures are not permitted
within 200mm from burner.
Note 2:
No overhanging surface or rangehood / exhaust system are permitted within 600mm above cooktop.
Note 3:
Leave at least 50mm clearance between the base of the appliance and a combustible surface. Never leave the packing
components (plastic bags, nails, foamed polystyrene, etc.) within the reach of the children since they are a source of potential
danger.
The hob has a special seal which prevents liquid from entering the cabinet. Follow these instructions in order to correctly apply it.
Seal:
Detach the seal/s from their backing, ensure that the transparent protection still adheres to the seal itself. Turn over the hob and
correctly position seal under the edge of the hob, so that the outer part of the seal perfectly matches the outer edge of the hob.
Press the seal firmly in place to fix the seal to the hob.
By ensuring that this appliance is disposed of correctly, you will help prevent any possible harm to
The environment and to human health which might otherwise be caused if disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal household waste.
It should be taken to a collection point for the recycling of electrical and electronic goods.
For further information regarding the treatment, recovery and recycling of this product, please contact
your local council, household waste disposal service or the shop where you purchased the product.
CLEANING AND MAINTENANCE
- Do not use cleaning products containing abrasive materials for the cleaning and maintenance of the glass.
e.g. scouring powders containing an abrasive, abrasive compounds, abrasive stones, pumice stones, wire
brushes and so on. They may scratch the hob surface, causing irreversible damage.
- Large spillages that are firmly burnt onto the hob can be removed using a special scraper; be careful not
to damage the ceramic hob surface when doing this.
Caution! The scraper sharp blade should always be protected by adjusting the cover (just push it with your
thumb). Injuries are possible so be careful when using this instrument, keep it out of reach of children.
Appropriate light cleaning products are recommended e.g. any kind of liquid detergents. Alternatively a
solution of warm water with a little dishwashing liquid or cleaning products for stainless steel sinks can be
used.
PROBLEM
Hob doesn't work
SOLUTION
•Check the power connection
•Check the safety cutoff switch is OFF
•Check the fuse and the mains current limit
There is some smoke when
the hob is working
•It is normal the first time use.
•Clean around the electric hob and the
cooking zones
The wire/s are damaged •Contact the nearest maintainance
centre for service/ repair.
MALFUNCTION ELIMINATION
CONNECTION DIAGRAM
Caution! Voltage of heating
elements 220-240V Caution! In the event
of any connection the safety Wire
must be connected to the E terminal.
Recommended type of
connection lead
N
L
N
L
E
Brackets
OR
Screw
S
Worktop
Screw
Screw
bracket
Hob
50
200 200
Rear wall
Front edge of worktop
Wood block
Recommended
installation
600-750
450
524
280
496
304
63
90


Produktspezifikationen

Marke: Artusi
Kategorie: Ofen
Modell: CACC32KX

Brauchst du Hilfe?

Wenn Sie Hilfe mit Artusi CACC32KX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ofen Artusi

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-